Yeelights
Aktiverad
Yeelights LAN
Control Yeelights using Homey over your local network (LAN)
Use Homey to control your Yeelights over your local network (LAN). All Yeelight products that communicate over WiFi are supported by this app.
Adding Yeelights
Before being able to add your Yeelights as devices in Homey you will need to enable the "Developer Mode" or "LAN control" in the official Yeelight app. You can find this under the "settings" of your light within the Yeelight smartphone app.
Please use the support topic on the community forum for additional information and support questions.
Enheter som stöds
Flow-kort
Klicka på en enhet ovan för att visa endast relaterade Flow-kort.
När...
Yeelights
Inaktiverad
Yeelights
Dimningsnivå ändrades
Och...
Yeelights
Är på
Yeelights
Night Mode is on
Då...
Yeelights
Aktivera
Yeelights
Stäng av
Yeelights
Växla på och av
Yeelights
Dimma till %
Yeelights
Set relative dim-level %
Dim or brighten with respect to the device's current dim-level.
Yeelights
Ställ in en temperatur %
Justerar temperaturen på ljuset. Ett högre värde innebär en varmare färg.
Yeelights
Ställ in nyans °
Select a color from the hue scale, for example red (0°/360°), yellow (60°), or blue (180°).
Yeelights
Ställ in en färg ...
Yeelights
Ställ in en slumpvis färg
Yeelights
Ställ in mättnad %
Yeelights
Set default on state
Use this card to save the current state as the default on state of your Yeelight
Yeelights
Change brightness to Brightness, temperature to Temperature in Duration in milliseconds milliseconds and recover to Finish action
Use this card to create a changing effect of temperature and brightness over time (duration in milliseconds, temperature in Kelvin 1700-6500 and brightness in percentage)
Yeelights
Change temperature to Temperature and brightness to Brightness
Use this card to set the temperature and brightness directly (temperature in Kelvin 1700-6500 and brightness in percentage)
Yeelights
Change color to ... and brightness to Brightness
Use this card to set the color and brightness directly (brightness in percentage)
Yeelights
Send advanced command Custom command
Advanced users can use this card to send any custom command, see the Yeelight documentation for options
Yeelights
Toggle night mode to ...
Use this card to switch the light between night mode and normal mode
Yeelights
Switch ambilight to ...
Use this card to switch the ambilight on or off.
Yeelights
Dim ambilight to % in Duration in seconds seconds
Use this card to dim the ambilight and the duration for dimming in seconds.
Yeelights
Set ambilight temperature to %
Use this card to set the temperature of the ambilight. A higher value is a warmer temperature.
Yeelights
Save current state
Use this card to save the current state of the light so you can restore it later.
Yeelights
Restore saved state
Use this card to set the state of the light to the previously saved state.
Support
Har du problem med den här appen? Kontakta utvecklaren här.
Vad är nytt?
Version 3.0.18 — Support for Yeelight Screen Bar Pro.
Yeelights LAN
Yeelights LAN är inte kompatibelt med vald Homey.
Yeelights LAN installeras på Homey inom kort.
Ändringslogg
Vi kommer att skicka en tacksamhet till Jelger Haanstra!
Vi låter Jelger Haanstra veta att du älskar appen. Överväg att stödja Jelger Haanstra genom att göra en donation?
Donera till Jelger Haanstra
Utvecklaren av Yeelights LAN tar emot donationer.
Gör en donation för att tacka!
