WARP Charger

Charge with sunshine, steered by Homey
Charge with sunshine, steered by Homey

Czytaj więcej ›

Obsługiwane urządzenia

Karty Flow

Kliknij na urządzenie powyżej, aby wyświetlić tylko powiązane karty Flow.

Kiedy...

WARP Charger
Rozpoczęto ładowanie
WARP Charger
Zatrzymano ładowanie
WARP Charger
Stan ładowania ładowarki EV uległ zmianie ...
WARP Charger
Zmiana mocy
WARP Charger
Alarm ogólny włączony
WARP Charger
Alarm ogólny wyłączony
WARP Charger
The status changed
WARP Charger
An error occurred
WARP Charger
The charge mode changed
WARP Charger
An NFC tag was presented
i
Only for wallboxes with NFC.
WARP Charger
A charging session ended
i
Fires when the vehicle is disconnected. Energy is only available on wallboxes with a meter (Pro).
WARP Charger
Vehicle charge reached Charge level %
i
Only WARP4 Pro with ISO 15118.
WARP Energy Manager
Zmiana mocy
WARP Energy Manager
Grid import rose above Power W
WARP Energy Manager
Feed-in rose above Power W
WARP Energy Manager
PV surplus rose above Power W
WARP Energy Manager
PV surplus fell below Power W
WARP Energy Manager
Electricity price fell below Price (ct/kWh) ct
i
Needs a dynamic tariff in the WARP device.
WARP Energy Manager
Electricity price rose above Price (ct/kWh) ct
i
Needs a dynamic tariff in the WARP device.
WARP Energy Manager
The charge mode changed
WARP Energy Manager
Input Input was State
WARP Energy Manager
§14a limit started
WARP Energy Manager
§14a limit ended

Oraz...

WARP Charger
Jest w trakcie ładowania
WARP Charger
Stan ładowania ładowarki EV to ...
WARP Charger
Alarm ogólny jest włączony
WARP Charger
Vehicle is connected
WARP Charger
Charge mode is Charge mode
WARP Charger
Charging with Phases
WARP Energy Manager
Feeding into the grid
WARP Energy Manager
Electricity price is below Price (ct/kWh) ct
WARP Energy Manager
Now is among the Hours cheapest hours of today
WARP Energy Manager
Relay Relay is on
WARP Energy Manager
Charge mode is Charge mode
WARP Energy Manager
§14a limit is active

Wtedy...

WARP Charger
Rozpoczęcie ładowania
WARP Charger
Zatrzymanie ładowania
WARP Charger
Set current limit to Current A
i
Upper limit. If an Energy Manager controls the wallbox, it distributes the current below this limit.
WARP Charger
Set charge mode to Charge mode
i
Sets the mode for this wallbox only. If an Energy Manager controls the wallbox, its next mode change applies to all wallboxes again.
WARP Charger
Switch to Phases
i
Only if the wallbox allows external phase switching and “Switch phases” is allowed in the app settings.
WARP Charger
Turn boost mode State
WARP Charger
Limit charging time to Duration
WARP Charger
Limit charging energy to Energy kWh
i
0 = no limit. Applies to the current or next charge. Without a meter Homey estimates the energy (roughly).
WARP Charger
Charge vehicle up to Charge level %
i
Only WARP4 Pro with ISO 15118. 0 = no limit.
WARP Charger
Charge Charging hours h, ready Departure at Time
i
Only for wallboxes without an Energy Manager. Otherwise use the Energy Manager card.
WARP Charger
Turn off Eco charge plan
i
Only for wallboxes without an Energy Manager. Otherwise use the Energy Manager card.
WARP Charger
Send Number as Value to API meter, Sign
i
For values WARP cannot read itself, e.g. a home battery. The list shows the values set up for the meter in the WARP web interface.
WARP Energy Manager
Set charge mode to Charge mode
WARP Energy Manager
Switch to Phases
i
Only if the Energy Manager allows external phase switching and “Switch phases” is allowed in the app settings.
WARP Energy Manager
Switch relay Relay State
i
Energy Manager 2.0 only. Needs “Switch relays and SG Ready by Flow” in the app settings.
WARP Energy Manager
Switch SG Ready Output State
i
Energy Manager 2.0 only. Needs “Switch relays and SG Ready by Flow” in the app settings. Not possible while the output is used by the heating control.
WARP Energy Manager
Allow Current A for all wallboxes
WARP Energy Manager
Charge Charging hours h, ready Departure at Time
i
Uses the cheapest hours (dynamic tariff required).
WARP Energy Manager
Turn off Eco charge plan
WARP Energy Manager
Send Number as Value to API meter, Sign
i
For values WARP cannot read itself, e.g. a home battery. The list shows the values set up for the meter in the WARP web interface.

Widżety

Widżety tej aplikacji można dodać do pulpitu nawigacyjnego lub ekranu głównego w aplikacji mobilnej.

Charging history
Charging history
Charge manager
Charge manager
Charge mode
Charge mode
Energy flow
Energy flow
Phase load
Phase load
Electricity price today
Electricity price today
PV surplus
PV surplus
Wallbox status
Wallbox status

Pomoc

Masz problem z tą aplikacją? Skontaktuj się z twórcami aplikacji za pomocą forum Homey Community.

Nowości

Wersja 2.0.1 — Small clean-ups.

Zobacz listę zmian

WARP Charger

WARP Charger nie jest kompatybilna z wybranym Homey.

WARP Charger zostanie wkrótce zainstalowana na Homey.
Zainstaluj