NRG.Watch Itho (API)
Temperaturen endres
NRG.Watch Itho add-on
Control and monitor your Itho ventilation system via MQTT or API in Homey (requires the NRG.Watch Itho add-on).
Advarsel! Denne appen fungerer kanskje ikke som den skal.
Denne appen er under testing, og har aldri blitt anmeldt. Den fungerer kanskje ikke som forventet.
Vær ekstra forsiktig når du installerer denne appen.
Integrate your Itho ventilation system with Homey using the NRG.Watch Itho add-on hardware module. This integration enables automated climate control based on humidity, temperature, or time schedules, creating a healthier and more comfortable indoor environment.
Connect via MQTT for real-time updates or HTTP API for polling-based control. Monitor indoor climate with temperature and humidity sensors, control fan speeds and presets, and track system health with error monitoring and diagnostic data. The app supports both standard Itho units and systems with CC1101 RF modules for extended functionality.
Set up is straightforward: add the device in Homey, choose your connection method (MQTT or API), select your Itho device type, and configure the connection settings. The app handles all communication with your ventilation system automatically.
Støttede enheter
Flow-kort
Klikk på en enhet ovenfor for å kun vise relaterte Flow-kort.
Når …
NRG.Watch Itho (API)
Luftfuktigheten ble endret
NRG.Watch Itho (API)
A command failed
NRG.Watch Itho (API)
A command was sent successfully
NRG.Watch Itho (API)
The Itho device went offline
NRG.Watch Itho (API)
The Itho device came online
NRG.Watch Itho (API)
The error state changed
NRG.Watch Itho (API)
The fan preset changed
NRG.Watch Itho (API)
The fan speed changed
NRG.Watch Itho (API)
The humidity changed
NRG.Watch Itho (API)
The temperature changed
NRG.Watch Itho (MQTT)
Temperaturen endres
NRG.Watch Itho (MQTT)
Luftfuktigheten ble endret
NRG.Watch Itho (MQTT)
A command failed
NRG.Watch Itho (MQTT)
A command was sent successfully
NRG.Watch Itho (MQTT)
The Itho device went offline
NRG.Watch Itho (MQTT)
The Itho device came online
NRG.Watch Itho (MQTT)
The error state changed
NRG.Watch Itho (MQTT)
The fan preset changed
NRG.Watch Itho (MQTT)
The fan speed changed
NRG.Watch Itho (MQTT)
The humidity changed
NRG.Watch Itho (MQTT)
MQTT broker connected
NRG.Watch Itho (MQTT)
MQTT broker disconnected
NRG.Watch Itho (MQTT)
Message received on topic Topic
Triggers when a message is received on the specified MQTT topic. Supports wildcards: + (single level) and # (multi level).
NRG.Watch Itho (MQTT)
The temperature changed
Og …
NRG.Watch Itho (API)
The Itho device has an error
NRG.Watch Itho (API)
The Itho device is online
NRG.Watch Itho (API)
The fan preset is Preset
NRG.Watch Itho (API)
The fan speed is above Speed (0-255)
NRG.Watch Itho (API)
The fan speed is below Speed (0-255)
NRG.Watch Itho (API)
The fan speed is Speed (0-255)
NRG.Watch Itho (API)
The humidity is above Humidity %
NRG.Watch Itho (API)
The humidity is below Humidity %
NRG.Watch Itho (API)
The temperature is above Temperature °C
NRG.Watch Itho (API)
The temperature is below Temperature °C
NRG.Watch Itho (MQTT)
The Itho device has an error
NRG.Watch Itho (MQTT)
The Itho device is online
NRG.Watch Itho (MQTT)
The fan preset is Preset
NRG.Watch Itho (MQTT)
The fan speed is above Speed (0-255)
NRG.Watch Itho (MQTT)
The fan speed is below Speed (0-255)
NRG.Watch Itho (MQTT)
The fan speed is Speed (0-255)
NRG.Watch Itho (MQTT)
The humidity is above Humidity %
NRG.Watch Itho (MQTT)
The humidity is below Humidity %
NRG.Watch Itho (MQTT)
MQTT broker is connected
NRG.Watch Itho (MQTT)
The temperature is above Temperature °C
NRG.Watch Itho (MQTT)
The temperature is below Temperature °C
Så …
NRG.Watch Itho (API)
Clear queued timers and commands
Clears queued timers and returns to the fallback/base behavior
NRG.Watch Itho (API)
Send virtual remote command Command
Emulates a configured virtual remote
NRG.Watch Itho (API)
Set the fan preset to Preset
Sends a preset command such as low, medium, or high
NRG.Watch Itho (API)
Set the fan speed to Speed (0-255)
Sets the raw fan speed value in the supported range 0-255
NRG.Watch Itho (API)
Set the fan speed to Speed (0-255) for Seconds seconds
Sets the fan speed with a timer
NRG.Watch Itho (API)
Start a timer for Seconds seconds
Starts a timed fan action. The exact resulting speed depends on the linked preset or speed.
NRG.Watch Itho (MQTT)
Clear queued timers and commands
Clears queued timers and returns to the fallback/base behavior
NRG.Watch Itho (MQTT)
Send Message on topic Topic with QoS Quality of Service and retain Retain
Publishes a message to the specified MQTT topic with custom QoS and retain settings
NRG.Watch Itho (MQTT)
Send Message on topic Topic
Publishes a message to the specified MQTT topic with default QoS 0 and no retain
NRG.Watch Itho (MQTT)
Send virtual remote command Command
Emulates a configured virtual remote
NRG.Watch Itho (MQTT)
Set the fan preset to Preset
Sends a preset command such as low, medium, or high
NRG.Watch Itho (MQTT)
Set the fan speed to Speed (0-255)
Sets the raw fan speed value in the supported range 0-255
NRG.Watch Itho (MQTT)
Set the fan speed to Speed (0-255) for Seconds seconds
Sets the fan speed with a timer
NRG.Watch Itho (MQTT)
Start a timer for Seconds seconds
Starts a timed fan action. The exact resulting speed depends on the linked preset or speed.
Støtte
Har du et problem med denne appen? Kontakt utvikleren her.
Nyheter
Versjon 1.0.2 — Fixed icons and readme
NRG.Watch Itho add-on
NRG.Watch Itho add-on er ikke kompatibel med den valgte Homey.
NRG.Watch Itho add-on vil straks installeres på Homey.
Endringslogg
Vi sender en takk til Robert Coemans!
Vi lar Robert Coemans vite at du elsker appen.
Forslaget ditt er sendt
Vi vil varsle Robert Coemans om at du har sendt et forslag.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
