Alarm input
Het contactalarm gaat aan
Hikvision NVR & DVR
Every camera. One recorder. Full control.
Let op! Deze app werkt mogelijk niet.
Deze app versie wordt op dit moment getest, en is nog niet goedgekeurd.
Let extra goed op bij het gebruiken van deze app.
Connect a Hikvision recorder, IP camera or doorbell to Homey the way a security system should work: every channel behind your DVR or NVR shows up on its own, live video plays right inside the Homey app, and a camera or doorbell event can trigger a Flow the moment it happens, with a snapshot attached.
Unlike most camera integrations, this app understands recorders: it enumerates every analog and IP channel automatically, so you're never adding devices by hand one camera at a time. It finds recorders and cameras on your network on its own, and recovers on its own if a device's IP address changes.
Ondersteunde apparaten
Flow-kaarten
Klik op een apparaat hierboven om gerelateerde Flow-kaarten te zien.
Als...
Alarm input
Het contactalarm gaat uit
Alarm output
Aangezet
Alarm output
Uitgezet
Camera channel
De bewegingsmelder gaat aan
Camera channel
De bewegingsmelder gaat uit
Camera channel
Het sabotagealarm gaat aan
Camera channel
Het sabotagealarm gaat uit
Camera channel
Het algemene alarm gaat aan
Camera channel
Het algemene alarm ging uit
Camera channel
Aangezet
Camera channel
Uitgezet
Camera channel
Any event occurred on [[device]]
Fires for every event, known or unknown — useful for events this app doesn't have a dedicated trigger for yet.
Camera channel
Intrusion stopped
Camera channel
Intrusion started
Camera channel
Line crossing stopped
Camera channel
Line crossing started
Camera channel
Region entry or exit stopped
Camera channel
Region entry or exit started
Doorbell
De bewegingsmelder gaat aan
Doorbell
De bewegingsmelder gaat uit
Doorbell
Het algemene alarm gaat aan
Doorbell
Het algemene alarm ging uit
Doorbell
The doorbell button on [[device]] was pressed
IP Camera
De bewegingsmelder gaat aan
IP Camera
De bewegingsmelder gaat uit
IP Camera
Het sabotagealarm gaat aan
IP Camera
Het sabotagealarm gaat uit
IP Camera
Het algemene alarm gaat aan
IP Camera
Het algemene alarm ging uit
IP Camera
Intrusion stopped
IP Camera
Intrusion started
IP Camera
Line crossing stopped
IP Camera
Line crossing started
IP Camera
Region entry or exit stopped
IP Camera
Region entry or exit started
Recorder
Het algemene alarm gaat aan
Recorder
Het algemene alarm ging uit
Recorder
Was disarmed
Fires when detection is switched off for every channel through this app.
Recorder
Was armed
Fires when detection is switched back on for every channel through this app.
En...
Alarm input
Het contactalarm is aan
Alarm output
Is aan
Camera channel
De bewegingsmelder is aan
Camera channel
Het sabotagealarm is aan
Camera channel
Het algemene alarm is aan
Camera channel
Is aan
Camera channel
Motion detection is on
Checks the motion detection setting on the device itself at the moment the Flow runs.
Camera channel
Intrusion is active
Camera channel
Line crossing is active
Camera channel
Region entry or exit is active
Doorbell
De bewegingsmelder is aan
Doorbell
Het algemene alarm is aan
Doorbell
Motion detection is on
Checks the motion detection setting on the device itself at the moment the Flow runs.
IP Camera
De bewegingsmelder is aan
IP Camera
Het sabotagealarm is aan
IP Camera
Het algemene alarm is aan
IP Camera
Motion detection is on
Checks the motion detection setting on the device itself at the moment the Flow runs.
IP Camera
Intrusion is active
IP Camera
Line crossing is active
IP Camera
Region entry or exit is active
Recorder
Het algemene alarm is aan
Recorder
Hard disk is healthy
Healthy means the recorder reports its hard disk status as OK. The status is checked every minute.
Recorder
Is armed
Disarmed means detection was turned off on every channel with the Disarm action or the Armed switch of this app.
Dan...
Alarm output
Zet aan
Alarm output
Zet uit
Alarm output
Schakel aan of uit
Alarm output
Pulse for Duration ms
Camera channel
Zet aan
Camera channel
Zet uit
Camera channel
Schakel aan of uit
Camera channel
Post Event type state Event state to Webhook URL
Posts a small JSON payload (device, channel, event type, state, timestamp) — never credentials. 10s timeout, no retries; a failure shows as a Flow error.
Camera channel
Set brightness to Brightness, contrast to Contrast and saturation to Saturation
Values match the recorder's own web UI scale (0-255, 128 is the typical default).
Camera channel
Take a snapshot with [[device]]
Advanced
IP Camera
Pan Pan, tilt Tilt, zoom Zoom for Duration ms
Only works on cameras that report PTZ support — most fixed cameras and analog DVR channels don't have this.
IP Camera
Go to preset Preset number
Only works on cameras that report PTZ support, with the preset already saved on the camera itself.
Recorder
Arm detection
Switches detection back on for every channel, restoring exactly the settings each channel had before it was disarmed.
Recorder
Disarm detection
Switches detection off on every channel and remembers each channel's exact settings, so Arm detection can restore them later.
Ondersteuning
De ontwikkelaar van deze app biedt geen directe ondersteuning.
Wat is nieuw
Versie 2.0.0 — Updated images and text
Hikvision NVR & DVR
Hikvision NVR & DVR is niet compatibel met de geselecteerde Homey
Hikvision NVR & DVR wordt op Homey geïnstalleerd.
Changelog
We sturen een bedankje naar Wisse Koelman!
We laten Wisse Koelman weten dat je dol bent op de app.
Je voorstel is verzonden
We laten Wisse Koelman weten dat je een voorstel hebt verzonden.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
