Adlar Castra Heat Pump (Aurora-II Modbus)
희망 온도가 변경되면
Adlar Castra Heat Pump Gateway
Full local control of your Adlar Castra heat pump — no cloud required.
경고! 이 앱이 제대로 작동하지 않을 수 있습니다.
이 앱 버전은 현재 테스트 중이며 아직 검토되지 않았습니다. 기대한 대로 작동하지 않을 수 있습니다.
이 앱을 설치할 때는 각별히 주의하세요.
This app connects the Adlar Castra or Aurora II heat pump to Homey Pro using
a wired Modbus RS485 gateway on your local network. No cloud connection is
needed for daily operation, which makes the integration fast, reliable and
independent of external services.
You get full control of your heat pump directly from Homey: adjust heating,
cooling and hot water setpoints, monitor temperatures, power consumption and
COP, and automate your system with Flow cards. A built-in local dashboard lets you monitor hundreds of individual Modbus
registers, configure your heat pump as an expert user including graphical
heating curve configuration, and set up detailed reports in Markdown format,
all within your home network.
Full technical documentation is available via the source code link on this
App Store page.
지원되는 디바이스
Flow 카드
위의 디바이스를 클릭하면 관련 Flow 카드만 표시됩니다.
언제...
Adlar Castra Heat Pump (Aurora-II Modbus)
켜지면
Adlar Castra Heat Pump (Aurora-II Modbus)
꺼지면
Adlar Castra Heat Pump (Aurora-II Modbus)
유량이 변경되면
Adlar Castra Heat Pump (Aurora-II Modbus)
알람이 켜지면
Adlar Castra Heat Pump (Aurora-II Modbus)
알람이 꺼지면
Adlar Castra Heat Pump (Aurora-II Modbus)
Simulated target temperature updated
Triggers every control cycle (5 min) with full breakdown of what adaptive control calculates. Use for monitoring, logging, and confidence-based filtering. Filter on building_model_confidence to only act on high-confidence recommendations.
Adlar Castra Heat Pump (Aurora-II Modbus)
Adaptive control status changed
Triggered when adaptive temperature control is enabled or disabled
Adlar Castra Heat Pump (Aurora-II Modbus)
Ambient temperature changed Condition Temperature °C
Triggered when ambient temperature has changed above or below a specified level - useful for weather compensation
Adlar Castra Heat Pump (Aurora-II Modbus)
New building insight detected
Triggers when building model detects actionable performance insight (≥70% confidence). Use tokens to filter by category and savings potential.
Adlar Castra Heat Pump (Aurora-II Modbus)
Building profile mismatch detected
Triggers when learned building behavior significantly differs from selected profile (>30% deviation). Suggests optimal profile for faster learning.
Adlar Castra Heat Pump (Aurora-II Modbus)
Cheapest block started
Triggers when the cheapest electricity price block of the day starts. Use to maximize energy consumption during low-price periods.
Adlar Castra Heat Pump (Aurora-II Modbus)
Coiler temperature Condition Temperature °C
Triggers when electricity coiler temperature goes above or below a specified level
Adlar Castra Heat Pump (Aurora-II Modbus)
Compressor frequency Condition Frequency Hz (Expert)
Triggers when compressor frequency goes above or below a specified level.
Adlar Castra Heat Pump (Aurora-II Modbus)
COP efficiency changed Condition COP threshold
Triggers when the Coefficient of Performance (COP) goes above or below a specified threshold
Adlar Castra Heat Pump (Aurora-II Modbus)
COP outlier detected
Triggers when an invalid or suspicious COP value is detected, indicating potential sensor issues
Adlar Castra Heat Pump (Aurora-II Modbus)
COP trend detected: Trend type
Triggers when COP shows a significant improving or degrading trend over the last 24 hours
Adlar Castra Heat Pump (Aurora-II Modbus)
Daily consumption reached Daily threshold (kWh) kWh
Triggers when daily electricity consumption reaches specified threshold
Adlar Castra Heat Pump (Aurora-II Modbus)
Daily COP efficiency changed Condition Daily COP threshold
Triggers when the 24-hour average COP goes above or below a specified threshold
Adlar Castra Heat Pump (Aurora-II Modbus)
Daily cost exceeded €Cost threshold (€)
Triggers when today's total energy cost exceeds specified amount (requires price optimizer)
Adlar Castra Heat Pump (Aurora-II Modbus)
Discharge temperature Condition Temperature °C
Triggers when discharge temperature goes above or below a specified level
Adlar Castra Heat Pump (Aurora-II Modbus)
Economizer inlet temperature Condition Temperature °C
Triggers when economizer inlet temperature goes above or below a specified level
Adlar Castra Heat Pump (Aurora-II Modbus)
Economizer outlet temperature Condition Temperature °C
Triggers when economizer outlet temperature goes above or below a specified level
Adlar Castra Heat Pump (Aurora-II Modbus)
EEV pulse-steps Condition Pulse-steps
Triggers when Electronic Expansion Valve (EEV) pulse-steps go above or below a specified level
Adlar Castra Heat Pump (Aurora-II Modbus)
EVI Open pulse-steps Condition Pulse-steps
Triggers when Enhanced Vapor Injection (EVI) pulse-steps go above or below a specified level
Adlar Castra Heat Pump (Aurora-II Modbus)
Expensive period approaching
Triggers N hours before the most expensive electricity price block starts. Use to pre-heat or prepare before high-price periods.
Adlar Castra Heat Pump (Aurora-II Modbus)
Fan motor frequency Condition Frequency Hz (Expert)
Triggers when fan motor frequency goes above or below a specified level.
Adlar Castra Heat Pump (Aurora-II Modbus)
Fault code detected
Triggers when a system fault is detected
Adlar Castra Heat Pump (Aurora-II Modbus)
Forecast heating advice available
Triggers when new COP-optimized heating advice is available based on temperature forecast
Adlar Castra Heat Pump (Aurora-II Modbus)
Heating mode changed
Triggers when the heating mode changes
Adlar Castra Heat Pump (Aurora-II Modbus)
High pressure temperature Condition Temperature °C
Triggers when high pressure saturation temperature goes above or below a specified level
Adlar Castra Heat Pump (Aurora-II Modbus)
Incoiler temperature Condition Temperature °C
Triggers when incoiler temperature goes above or below a specified level
Adlar Castra Heat Pump (Aurora-II Modbus)
Inlet temperature changed Condition Temperature °C
Triggers when water inlet temperature goes above or below a specified level
Adlar Castra Heat Pump (Aurora-II Modbus)
Inlet temperature has changed
Triggers when water inlet temperature changes by at least 0.5°C
Adlar Castra Heat Pump (Aurora-II Modbus)
Building model reached a confidence milestone
Triggers when the building thermal model reaches a learning milestone (e.g., 70% confidence)
Adlar Castra Heat Pump (Aurora-II Modbus)
Low pressure temperature Condition Temperature °C
Triggers when low pressure saturation temperature goes above or below a specified level
Adlar Castra Heat Pump (Aurora-II Modbus)
Monthly COP efficiency changed Condition Monthly COP threshold
Triggers when the 30-day average COP goes above or below a specified threshold
Adlar Castra Heat Pump (Aurora-II Modbus)
Outlet temperature changed Condition Temperature °C
Triggers when water outlet temperature goes above or below a specified level
Adlar Castra Heat Pump (Aurora-II Modbus)
Outlet temperature has changed
Triggers when water outlet temperature changes by at least 0.5°C
Adlar Castra Heat Pump (Aurora-II Modbus)
Performance report is ready
Triggered daily at 23:00 with a comprehensive performance report. Use in combination with a notification action to receive daily performance summaries.
Adlar Castra Heat Pump (Aurora-II Modbus)
Power consumption exceeded Power threshold (W) W
Triggers when power consumption exceeds specified threshold (requires power monitoring support)
Adlar Castra Heat Pump (Aurora-II Modbus)
Pre-heating time recommendation
Triggers when ΔT (target - indoor) exceeds 1.5°C. Provides pre-heat duration based on building thermal response (τ). Requires ≥70% model confidence. Max once per 4 hours.
Adlar Castra Heat Pump (Aurora-II Modbus)
Energy price category changed
Triggers when energy price category changes (very_low, low, normal, high, very_high)
Adlar Castra Heat Pump (Aurora-II Modbus)
Price trend changed
Triggers when electricity price trend direction changes (rising, falling, stable). Based on linear regression analysis with confidence threshold.
Adlar Castra Heat Pump (Aurora-II Modbus)
Suction temperature Condition Temperature °C
Triggers when suction temperature goes above or below a specified level
Adlar Castra Heat Pump (Aurora-II Modbus)
Tank temperature Condition Temperature °C
Triggers when water tank temperature goes above or below a specified level
Adlar Castra Heat Pump (Aurora-II Modbus)
Adaptive control recommends a temperature adjustment
Triggered when adaptive control calculates a recommended temperature adjustment (only when significant action needed). Use building_model_confidence to filter on model confidence. Use 'Set target temperature' action to apply.
Adlar Castra Heat Pump (Aurora-II Modbus)
Total consumption reached Consumption milestone (kWh) kWh
Triggers when total electricity consumption reaches specified milestones
Adlar Castra Heat Pump (Aurora-II Modbus)
Water flow rate Condition Flow rate (L/min) L/min (Expert)
Triggers when water flow rate goes above or below a specified level.
Adlar Castra Heat Pump (Aurora-II Modbus)
Work mode changed
Triggers when the work mode changes (ECO, Normal, Boost)
그리고...
Adlar Castra Heat Pump (Aurora-II Modbus)
켜지면
Adlar Castra Heat Pump (Aurora-II Modbus)
알람이 켜지면
Adlar Castra Heat Pump (Aurora-II Modbus)
Hot water curve setting is Hot water curve setting
Check if the hot water curve setting matches the selected setting
Adlar Castra Heat Pump (Aurora-II Modbus)
Compressor is running
Check if the compressor is currently running
Adlar Castra Heat Pump (Aurora-II Modbus)
Model confidence is above Threshold (%)%
Check if building model confidence exceeds a threshold (0-100%). Use as quality gate for flows (e.g., only send notifications when confidence >80%).
Adlar Castra Heat Pump (Aurora-II Modbus)
COP efficiency is above COP threshold
Check if the current Coefficient of Performance (COP) is above or below a threshold
Adlar Castra Heat Pump (Aurora-II Modbus)
COP trend is improving over Time period hours
Check the COP performance trend over a specified time period
Adlar Castra Heat Pump (Aurora-II Modbus)
Daily COP is above Daily COP threshold
Check if the 24-hour average COP is above or below a threshold
Adlar Castra Heat Pump (Aurora-II Modbus)
Device power is Power state
Check if the device power state matches the selected state
Adlar Castra Heat Pump (Aurora-II Modbus)
Fault is active
Check if a fault is currently active (fault code > 0)
Adlar Castra Heat Pump (Aurora-II Modbus)
Heating curve setting is Heating curve
Check if the heating curve setting matches the selected curve
Adlar Castra Heat Pump (Aurora-II Modbus)
Heating mode is Heating mode
Check if the heating mode matches the selected mode
Adlar Castra Heat Pump (Aurora-II Modbus)
Hot water temperature is Comparison Hot water temperature °C
Check if the hot water temperature matches the specified condition
Adlar Castra Heat Pump (Aurora-II Modbus)
Category insight is active
Check if a specific insight category is currently active (visible in capabilities). Returns false if dismissed or not detected.
Adlar Castra Heat Pump (Aurora-II Modbus)
Monthly COP is above Monthly COP threshold
Check if the 30-day average COP is above or below a threshold
Adlar Castra Heat Pump (Aurora-II Modbus)
Power consumption is above Power threshold (W) watts
Check if current power consumption is above or below a threshold (requires power monitoring support)
Adlar Castra Heat Pump (Aurora-II Modbus)
Current hour is in cheapest Block size (hours) hours of today
Check if current hour is within the cheapest N-hour block today. Useful for running high-power tasks during low-price periods.
Adlar Castra Heat Pump (Aurora-II Modbus)
Price trend for next Analysis window (hours) hours is Trend
Check if electricity prices are rising, falling, or stable in the next N hours. Based on linear regression with confidence metric.
Adlar Castra Heat Pump (Aurora-II Modbus)
Current price is below daily average by Margin (%)%
Check if current electricity price deviates from the daily average by at least the specified margin percentage. Useful for detecting significantly low or high prices.
Adlar Castra Heat Pump (Aurora-II Modbus)
Category savings are above €Threshold (EUR/month)/month
Check if estimated monthly savings for an insight category exceed a threshold (in EUR/month). Use for ROI-based filtering (e.g., only act on savings >€100/month).
Adlar Castra Heat Pump (Aurora-II Modbus)
Target (setpoint) temperature is Comparison Temperature °C
Check if the target (setpoint) temperature matches the specified condition
Adlar Castra Heat Pump (Aurora-II Modbus)
Ambient temperature is above Temperature°C
Check if the ambient temperature is above or below a specific value
Adlar Castra Heat Pump (Aurora-II Modbus)
Temperature differential is above Temperature differential °C
Check if the temperature difference between inlet and outlet is above or below a threshold
Adlar Castra Heat Pump (Aurora-II Modbus)
Total consumption is above Consumption threshold (kWh) kWh
Check if total electricity consumption is above or below a threshold
Adlar Castra Heat Pump (Aurora-II Modbus)
Water flow rate is above Flow rate (L/min) L/min
Check if water flow rate is above or below specified threshold
Adlar Castra Heat Pump (Aurora-II Modbus)
Work mode is Work mode
Check if the work mode matches the selected mode
그러면...
Adlar Castra Heat Pump (Aurora-II Modbus)
희망 온도 설정 °C
Adlar Castra Heat Pump (Aurora-II Modbus)
켜기
Adlar Castra Heat Pump (Aurora-II Modbus)
끄기
Adlar Castra Heat Pump (Aurora-II Modbus)
켬/끔 상태 전환하기
Adlar Castra Heat Pump (Aurora-II Modbus)
Calculate value via Input Value using curve rules Curve Definition
Calculates output values based on input (e.g., outdoor temperature → heating setpoint). Format: '[operator] threshold : value'. Operators: >, >=, <, <=, ==, !=. Evaluates top to bottom, returns first match. Use 'default : value' as fallback. Example heating curve: '< 0 : 55, < 5 : 50, < 10 : 45, default : 35'
Advanced
Adlar Castra Heat Pump (Aurora-II Modbus)
Calculate heating curve: L29=L29: Set temp at -15°C outdoor (°C)°C at -15°C, L28=L28: Slope grade (per 10°C)/10°C with outdoor temp Outdoor Temperature
Calculates supply temperature using Adlar Custom heating curve. Uses L29 (set temp at -15°C) and L28 (slope grade per 10°C). Example: L29=55°C at -15°C with L28=-5 gives slope -0.5/°C, formula y = -0.5x + 47.5. For outdoor temp 5°C → supply temp 45°C.
Advanced
Adlar Castra Heat Pump (Aurora-II Modbus)
Calculate when to start heating to reach Target indoor temperature (°C)°C at Ready at (HH:MM)
Calculate when to start heating to reach the desired indoor temperature at a specific time. Uses the building model's thermal time constant (τ) for accurate prediction.
Advanced
Adlar Castra Heat Pump (Aurora-II Modbus)
Calculate value from time periods Time schedule
Evaluates current time against a daily schedule to calculate output values. Perfect for time-based temperature scheduling, time-of-use pricing, and automated daily routines.
Advanced
Adlar Castra Heat Pump (Aurora-II Modbus)
Force insight analysis
Immediately evaluate building insights (without waiting for 50-minute interval). Returns number of insights detected and current model confidence.
Advanced
Adlar Castra Heat Pump (Aurora-II Modbus)
Generate performance report
Generate a comprehensive heat pump performance report with scores across 7 domains (efficiency, building, defrost, energy, pricing, telemetry, health). Returns overall score, rating, and actionable recommendations.
Advanced
Adlar Castra Heat Pump (Aurora-II Modbus)
Get seasonal mode
Returns heating/cooling mode based on current date. Heating season: Oct 1 - May 15 (aligned with EN 14825 SCOP standard). Perfect for automatically switching between winter and summer schedules.
Advanced
Adlar Castra Heat Pump (Aurora-II Modbus)
Read Modbus register Register address
Reads one Modbus holding register (FC03) and returns the raw register value as a flow token. Address in hex (0x0301) or decimal (769). Temperature registers store values ×10 — divide the result by 10 for °C.
Advanced
Adlar Castra Heat Pump (Aurora-II Modbus)
Write Register value to Modbus register Register address
Writes a raw value to one Modbus holding register (FC06). Address in hex (0x0301) or decimal (769). Temperature registers expect values ×10 — enter 450 for 45 °C. Use with care: incorrect values may affect heat pump behaviour.
Adlar Castra Heat Pump (Aurora-II Modbus)
Send Ambient temperature (°C)°C to heat pump for COP/thermal mass calculation
Sends ambient temperature data to the heat pump for enhanced COP/thermal mass calculations
Adlar Castra Heat Pump (Aurora-II Modbus)
Send external energy prices Energy prices (JSON) for price optimization
Sends hourly energy prices (€/kWh) from external source to enable price-based optimization. Accepts two formats: Array [0.11,0.10,...] where index=hour offset (0=current hour), or Object {"0":0.11,"1":0.10,...} with hour keys.
Adlar Castra Heat Pump (Aurora-II Modbus)
Send Water flow rate (L/min)L/min to heat pump for COP calculation
Sends water flow data to the heat pump for enhanced COP calculations
Adlar Castra Heat Pump (Aurora-II Modbus)
Send Indoor temperature (°C)°C indoor temperature for adaptive control
Sends current indoor/room temperature from an external sensor to enable adaptive temperature control
Adlar Castra Heat Pump (Aurora-II Modbus)
Send Power consumption (W)W to heat pump for COP calculation
Sends power consumption data to the heat pump for enhanced COP calculations
Adlar Castra Heat Pump (Aurora-II Modbus)
Send solar power Solar panel power (W)W to heat pump
Sends solar panel output for accurate solar radiation calculation. Use with SolarEdge, Enphase, etc.
Adlar Castra Heat Pump (Aurora-II Modbus)
Send solar radiation Solar radiation (W/m²) W/m² to heat pump
Sends solar radiation data for building model. Use with KNMI weather app.
Adlar Castra Heat Pump (Aurora-II Modbus)
Send wind speed Wind speed (km/h) km/h to heat pump
Sends wind speed data for heat loss correction. Use with KNMI weather app.
Adlar Castra Heat Pump (Aurora-II Modbus)
Set hot water curve setting to Hot water curve setting
Set the hot water curve setting for optimal efficiency
Adlar Castra Heat Pump (Aurora-II Modbus)
Set curve to Curve setting for Apply to
Set the curve setting, routed to heating, cooling, floor heating, or hot water. Auto follows the heat pump's current mode.
Adlar Castra Heat Pump (Aurora-II Modbus)
Set desired indoor temperature to Indoor Temperature °C
Set the desired room temperature for adaptive control. The adaptive control system will adjust the heat pump setpoint to reach this temperature.
Adlar Castra Heat Pump (Aurora-II Modbus)
Set device power to Power state
Set the device power state
Adlar Castra Heat Pump (Aurora-II Modbus)
Set Custom heating curve: slope Slope (k, e.g. -0.5), intercept Intercept (supply temp at -15°C, e.g. 55)°C
Writes the DIY heating curve directly to Modbus registers L27, L28 and L29. slope is the curve coefficient k (e.g. -0.5), intercept is the supply temperature at -15°C outdoor (L29, e.g. 55). Valid range: slope -5.0..0.0, intercept 30..80. Capabilities heating_curve_slope and heating_curve_intercept are updated within 30 seconds via polling.
Adlar Castra Heat Pump (Aurora-II Modbus)
Set heating curve setting to Heating curve setting
Set the heating curve setting
Adlar Castra Heat Pump (Aurora-II Modbus)
Set heating mode to Heating mode
Set the heating operation mode
Adlar Castra Heat Pump (Aurora-II Modbus)
Set hot water temperature to Hot water temperature (°C)
Set the hot water temperature setting
Adlar Castra Heat Pump (Aurora-II Modbus)
Set setpoint to Temperature (°C) for Apply to If decimal value
Set the setpoint temperature, routed to heating, cooling, or floor heating. Auto follows the heat pump's current mode.
Adlar Castra Heat Pump (Aurora-II Modbus)
Set target (setpoint) temperature to Temperature (°C) If decimal value
Set the target (setpoint) temperature for the heat pump
Adlar Castra Heat Pump (Aurora-II Modbus)
Set work mode to Work mode
Set the system work mode
위젯
지원
이 앱에 문제가 있습니까? 개발자에게 문의하려면 여기를 클릭하세요..
새로운 기능
버전 2.15.1 — Poll timeout disconnect patch.
Adlar Castra Heat Pump Gateway
선택하신 Homey에 Adlar Castra Heat Pump Gateway이(가) 호환되지 않습니다.
Adlar Castra Heat Pump Gateway이(가) 곧 Homey에 설치됩니다.
업데이트 로그
H Hi 님에게 고맙다는 인사를 전해드리겠습니다!
H Hi 님께 앱을 잘 사용하고 있다고 알려주세요.
제안이 전송되었습니다.
제안을 보내주셨다고 H Hi 님에게 알리겠습니다.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
