Circadian Light Group
켜지면
Smart (Components) Toolkit
Create advanced, state-aware logic units with multiple formulas.
== DEVICES ==
Logic Unit (2-10 inputs)
Create complex boolean logic using text-based formulas. Supports multiple formulas per device, timeouts, first-impression mode, and dynamic input linking to any device capability.
- Define formulas like: (A AND B) OR (NOT C)
- Link inputs to any device capability
- Multiple formulas per unit with individual timeouts
- Error detection and formula validation
Logic Device
A simpler single-formula logic device for straightforward boolean logic needs.
State Capture Device
Dynamically capture and restore device states at runtime.
- Named States: Save snapshots with custom names for scene management
- Stack Operations: Push/pop for temporary state changes (e.g., doorbell interruptions)
- Template-based: Define which devices and capabilities to capture
- Backup/Restore: Export all named states as JSON for backup, import to restore
State Device
Pre-define device states and apply them via flows. Configure states at setup time rather than capturing them dynamically.
== DOCUMENTATION ==
Full documentation available on GitHub
지원되는 디바이스
Flow 카드
위의 디바이스를 클릭하면 관련 Flow 카드만 표시됩니다.
언제...
Circadian Light Group
꺼지면
Circadian Light Group
밝기가 변경되면
Circadian Light Group
Circadian light group error occurred
Circadian Light Group
Outdoor light value requested
Use this trigger with the 'Set outdoor computed lux' action when outdoorLight.provider is external_value.
Circadian Light Group
Paused
Circadian Light Group
Phase changed
Fires when the device transitions between phases (day, evening, night).
Circadian Light Group
Red mode ended
Circadian Light Group
Red mode started
Circadian Light Group
Resumed
Circadian Light Group
Circadian target changed
Circadian Light Group
Turned off
Circadian Light Group
Turned on
Circadian Light Group Collection
켜지면
Circadian Light Group Collection
꺼지면
Circadian Light Group Collection
밝기가 변경되면
Circadian Light Group Collection
Circadian light group error occurred
Circadian Light Group Collection
Outdoor light value requested
Use this trigger with the 'Set outdoor computed lux' action when outdoorLight.provider is external_value.
Circadian Light Group Collection
Paused
Circadian Light Group Collection
Phase changed
Fires when the device transitions between phases (day, evening, night).
Circadian Light Group Collection
Red mode ended
Circadian Light Group Collection
Red mode started
Circadian Light Group Collection
Resumed
Circadian Light Group Collection
Circadian target changed
Circadian Light Group Collection
Turned off
Circadian Light Group Collection
Turned on
Logic Device
켜지면
Logic Device
꺼지면
Logic Device
알람이 켜지면
Logic Device
알람이 꺼지면
Logic Device
Configuration alarm changed to Alarm state
Triggers when a configuration error is detected or resolved (invalid JSON or formula syntax).
Logic Device
Configuration alarm state changed
Triggers when the configuration alarm state changes (error detected or resolved).
Logic Device
장치 알람이 알람 상태(으)로 변경됨
수식 결과가 선택한 값으로 변경될 때 트리거됩니다. 켜짐 = 수식 TRUE, 꺼짐 = 수식 FALSE. 논리 조건이 참 또는 거짓이 될 때 흐름을 실행하는 데 사용하세요.
Logic Device
Device alarm state changed
Triggers whenever the formula result changes (either direction). Use the 'Alarm state' token to check the new value. Ideal for logging or notification flows.
Logic Device
장치 알람 알람 상태
수식 결과가 TRUE(켜짐) 또는 FALSE(꺼짐)로 변경될 때 트리거됩니다. 알람은 수식 출력을 반영합니다 - 논리 상태 변경에 반응하는 데 사용하세요.
Logic Device
Device on-state changed
Triggers when the device is toggled on or off (enabled/disabled). Use this to detect when someone enables or disables the logic evaluation - not the formula result.
Logic Device
장치 상태
장치가 활성화 또는 비활성화될 때(켜기/끄기 토글) 트리거됩니다. 이것은 장치가 수식을 평가하는지 여부를 제어합니다 - 수식 결과 자체가 아닙니다.
Logic Unit (Dynamic)
켜지면
Logic Unit (Dynamic)
꺼지면
Logic Unit (Dynamic)
알람이 켜지면
Logic Unit (Dynamic)
알람이 꺼지면
Logic Unit (Dynamic)
Configuration alarm changed to Alarm state
Triggers when a configuration error is detected or resolved (invalid JSON or formula syntax).
Logic Unit (Dynamic)
Configuration alarm state changed
Triggers when the configuration alarm state changes (error detected or resolved).
Logic Unit (Dynamic)
공식 공식이(가) 결과(으)로 변경됨
선택한 공식이 지정된 결과(참 또는 거짓)로 변경될 때 트리거됩니다.
Logic Unit (Dynamic)
Formula Formula timed out
Smart (Components) Toolkit
Device type configuration alarm changed to Alarm state
Triggers when any device's configuration error is detected or resolved. You can filter by device type.
Smart (Components) Toolkit
Device type configuration alarm state changed
Triggers when any device's configuration alarm state changes (error detected or resolved). You can filter by device type.
Smart (Components) Toolkit
Solar event Event occurs (offset Offset (minutes) min)
Fires daily when the selected solar event occurs at this Homey's location.
State Capture Device
켜지면
State Capture Device
꺼지면
State Capture Device
Capture/Apply error occurred
Triggers when capture or apply fails (e.g., device unavailable, stack empty). Use 'Error' and 'State name' tokens for logging or notifications.
State Capture Device
State was applied
Triggers after devices have been restored to a saved state. Fires for Apply, Pop, and Peek operations. Use 'State name' token to identify which state was applied.
State Capture Device
State was captured
Triggers when a state is saved (via Capture or Push). The 'State name' token contains the name used, or '__stack__' for stack operations.
State Device
켜지면
State Device
꺼지면
State Device
알람이 켜지면
State Device
알람이 꺼지면
State Device
State applied successfully
Triggers when the State Device successfully applies all configured device states. Use this to chain additional actions after the state is fully applied.
State Device
Error occurred
Triggers when an error occurs while applying the state (e.g., device not found, capability unavailable). The 'Error' token contains the error message.
그리고...
Circadian Light Group
켜지면
Circadian Light Group
Is in phase Phase
Circadian Light Group
Is on
Circadian Light Group
Is paused
Circadian Light Group
Red mode is active
Circadian Light Group Collection
켜지면
Circadian Light Group Collection
Is in phase Phase
Circadian Light Group Collection
Is on
Circadian Light Group Collection
Is paused
Circadian Light Group Collection
Red mode is active
Logic Device
켜지면
Logic Device
알람이 켜지면
Logic Device
장치 알람이 켜져 알람 상태 있음
알람은 수식 결과를 반영합니다: 수식이 TRUE일 때 켜짐, FALSE일 때 꺼짐. 장치의 현재 논리 상태를 확인하는 데 사용하세요.
Logic Device
장치가 켜져 상태 있음
장치가 활성화 또는 비활성화되었는지 확인합니다. 꺼진 상태에서 장치는 수식 평가를 중지하고 입력 변경을 무시합니다. 알람 상태는 변경되지 않습니다.
Logic Device
Formula has timed out
Checks if the formula has timed out (no input received within the configured timeout period). Configure timeout in device settings.
Logic Device
Device has error
Checks if the device has any error (configuration error, timeout, or evaluation error). Use 'Clear error' action to reset the error state.
Logic Unit (Dynamic)
켜지면
Logic Unit (Dynamic)
알람이 켜지면
Logic Unit (Dynamic)
Formula Formula has timed out
Logic Unit (Dynamic)
Formula Formula result is Value
Logic Unit (Dynamic)
Device has error
Smart (Components) Toolkit
Gate Gate Name / ID is State
Checks if a gate is currently GO or NO GO immediately.
Smart (Components) Toolkit
Conditional Gate: Wait for GO (default: Default State (if new), timeout: Timeout duration Timeout unit, Name/ID: Gate Name / ID)
Pauses flow until the specified Gate is GO. Use 'Modify Conditional Gate' to control it by Name/ID.
Smart (Components) Toolkit
Has error in Error message
Smart (Components) Toolkit
Wait until Device Capability becomes Target value (timeout: Timeout duration Timeout unit, id: Waiter ID)
Waits until a device capability reaches a specific value. YES if value matches (or already correct), NO if timeout expires. A unique Waiter ID is auto-generated, or select an existing one to reuse.
State Capture Device
켜지면
State Capture Device
State State name exists
Checks if a named state with the specified name has been saved. Useful to avoid errors when applying a state that might not exist yet.
State Capture Device
Stack depth Comparison Depth
Checks the number of states currently on the stack. Useful for limiting stack growth or implementing complex undo scenarios.
State Capture Device
The state stack is empty
Checks if the state stack has any saved states. Use this before Pop operations to avoid errors when the stack is empty.
State Device
켜지면
State Device
알람이 켜지면
그러면...
Circadian Light Group
켜기
Circadian Light Group
끄기
Circadian Light Group
켬/끔 상태 전환하기
Circadian Light Group
다음 밝기로 조절 %
Circadian Light Group
상대 밝기 설정 %
제품의 현재 디밍 수준에 따라 어둡게 또는 밝게 설정돼요.
Circadian Light Group
온도 설정 %
조명의 온도를 조정해요. 값이 높을수록 따뜻한 색이에요.
Circadian Light Group
Apply current circadian profile
Immediately applies the current circadian target to lights that are already on.
Circadian Light Group
Apply state — dim Dim (0–1, blank = skip), temp Temperature (0–1, blank = skip), sat Saturation (0–1, blank = skip), red Force red color
Pushes the given values to all managed lights right now. Empty fields are skipped. Values are temporary — the next scheduler tick (~2 min) restores calculated values.
Circadian Light Group
Force red mode State for Duration (minutes, 0 = until cleared) min
Forces red mode on or off, optionally for a duration. Set duration to 0 to keep until manually changed.
Circadian Light Group
Pause for Amount Unit
Pauses automatic adjustments. Use amount 0 to pause until resumed manually.
Circadian Light Group
Pause until Event (offset Offset (minutes) min)
Circadian Light Group
Pause until Until
Circadian Light Group
Resume circadian light group
Circadian Light Group
Set outdoor computed lux to Outdoor computed lux from Source for Valid for minutes minutes
Pushes an externally computed outdoor light value into the Circadian Light Group.
Circadian Light Group
Set red threshold to Threshold (0–1)
Permanently sets the red mode threshold (0–1). When calculated temperature drops below this, lights with color support shift to red.
Circadian Light Group
Turn on Light at current circadian level
Sets temperature/color and dim, then turns the light on. Avoids the brief flash at the previous brightness.
Circadian Light Group Collection
켜기
Circadian Light Group Collection
끄기
Circadian Light Group Collection
켬/끔 상태 전환하기
Circadian Light Group Collection
다음 밝기로 조절 %
Circadian Light Group Collection
상대 밝기 설정 %
제품의 현재 디밍 수준에 따라 어둡게 또는 밝게 설정돼요.
Circadian Light Group Collection
온도 설정 %
조명의 온도를 조정해요. 값이 높을수록 따뜻한 색이에요.
Circadian Light Group Collection
Apply current circadian profile
Immediately applies the current circadian target to lights that are already on.
Circadian Light Group Collection
Apply state — dim Dim (0–1, blank = skip), temp Temperature (0–1, blank = skip), sat Saturation (0–1, blank = skip), red Force red color
Pushes the given values to all managed lights right now. Empty fields are skipped. Values are temporary — the next scheduler tick (~2 min) restores calculated values.
Circadian Light Group Collection
Force red mode State for Duration (minutes, 0 = until cleared) min
Forces red mode on or off, optionally for a duration. Set duration to 0 to keep until manually changed.
Circadian Light Group Collection
Pause for Amount Unit
Pauses automatic adjustments. Use amount 0 to pause until resumed manually.
Circadian Light Group Collection
Pause until Event (offset Offset (minutes) min)
Circadian Light Group Collection
Pause until Until
Circadian Light Group Collection
Resume circadian light group
Circadian Light Group Collection
Set outdoor computed lux to Outdoor computed lux from Source for Valid for minutes minutes
Pushes an externally computed outdoor light value into the Circadian Light Group.
Circadian Light Group Collection
Set red threshold to Threshold (0–1)
Permanently sets the red mode threshold (0–1). When calculated temperature drops below this, lights with color support shift to red.
Circadian Light Group Collection
Turn on Light at current circadian level
Sets temperature/color and dim, then turns the light on. Avoids the brief flash at the previous brightness.
Logic Device
켜기
Logic Device
끄기
Logic Device
켬/끔 상태 전환하기
Logic Device
Clear error
Clears the device's error state and re-evaluates the formula. Use this after fixing the issue that caused the error.
Logic Device
Evaluate formula
Manually triggers a re-evaluation of the formula using current input values. Useful when you want to force an update without waiting for input changes.
Logic Device
Validate configuration
Manually trigger configuration validation. Checks for JSON errors, invalid formulas, and duplicate IDs. Updates the configuration alarm accordingly.
Logic Unit (Dynamic)
켜기
Logic Unit (Dynamic)
끄기
Logic Unit (Dynamic)
켬/끔 상태 전환하기
Logic Unit (Dynamic)
Clear error state for formula Formula
Logic Unit (Dynamic)
Re-evaluate all formulas
Logic Unit (Dynamic)
Evaluate formula Formula
Logic Unit (Dynamic)
Set all inputs from JSON: JSON values (for ALL formulas)
⚠️ Sets ALL input values at once for ALL formulas in this Logic Unit from a JSON object. All formulas will receive the same input values. Use this when you want to update multiple inputs for all formulas simultaneously.
Logic Unit (Dynamic)
Set input Input to Value (for ALL formulas)
⚠️ Sets the same input value for ALL formulas in this Logic Unit. All formulas that use this input will be updated. Use this when you want to control multiple formulas together.
Logic Unit (Dynamic)
Set input Input to Value for formula Formula
✅ Sets the input value for ONE specific formula only. Other formulas are not affected. Use this when you want to control formulas independently.
Logic Unit (Dynamic)
Validate configuration
Manually trigger configuration validation. Checks for JSON errors, invalid formulas, and duplicate IDs. Updates the configuration alarm accordingly.
Smart (Components) Toolkit
Modify gate Gate Name / ID (Set state: New State, Set timeout: New Timeout (-1 = no change) Timeout unit)
Modifies a Conditional Gate. Set Timeout to -1 for no change.
Advanced
Smart (Components) Toolkit
Action waiter gate Waiter ID
Enable, disable or stop a waiter gate by its ID
Smart (Components) Toolkit
Evaluate Input value First operator min Logical operator Second operator max with rules Rules
Advanced
Smart (Components) Toolkit
Wait Duration Unit
Pauses the flow for the specified time before continuing.
State Capture Device
켜기
State Capture Device
끄기
State Capture Device
켬/끔 상태 전환하기
State Capture Device
Apply state State name
Restores all devices to the values stored in the selected named state. Devices are updated in the order they were configured.
State Capture Device
Capture state to State name
Reads current values from all configured devices and saves them under the specified name. Overwrites any existing state with the same name.
State Capture Device
Clear the state stack
Removes all states from the stack without applying any of them. Use this to reset the undo history or free up memory when states are no longer needed.
State Capture Device
Delete state State name
Permanently removes a named state from storage. This cannot be undone. The state will no longer appear in the autocomplete list.
State Capture Device
Export all named states
Exports all named states as a JSON string. Use the 'JSON data' token to save to a file, send via webhook, or store in a variable for backup purposes.
Advanced
State Capture Device
Get state State name as JSON
Retrieves a single named state as JSON. The output includes captured values and timestamp. Use for debugging, logging, or sharing state data with external systems.
Advanced
State Capture Device
Import named states from JSON data
Imports states from JSON exported by 'Export named states'. Existing states with matching names are overwritten. Use to restore backups or sync between devices.
State Capture Device
Peek and apply state (keep on stack)
Restores devices to the most recent stack state WITHOUT removing it. Useful when you want to reapply the same state multiple times or preview before committing with Pop.
State Capture Device
Pop and apply state from stack
Removes the most recent state from the stack and restores all devices to those values. Like an 'undo' operation. Fails if the stack is empty - use 'Stack is empty' condition to check first.
State Capture Device
Push current state onto stack
Captures current device values and adds them to the top of the stack. The stack works like an undo history - use Pop to restore the most recent state, or Peek to apply without removing.
State Capture Device
Set state State name from JSON data
Creates or updates a named state from JSON (must include 'values' object). Use to programmatically define states or receive state data from external sources via webhooks.
State Device
켜기
State Device
끄기
State Device
켬/끔 상태 전환하기
State Device
Apply state (Reset all: Turn off other State Devices first?)
Applies the pre-configured state to all devices. Enable 'Turn off other State Devices first' to ensure only this state is active (like a scene selector).
지원
이 앱에 문제가 있습니까? 개발자에게 문의하려면 여기를 클릭하세요..
새로운 기능
버전 1.10.16 — Capturing device IDs for ID resolution both in-app and on https://tiwas.github.io/SmartComponentsToolkit/tools/flow-doctor.html
Smart (Components) Toolkit
이 앱으로 Homey 전체를 관리할 수 있습니다.
선택하신 Homey에 Smart (Components) Toolkit이(가) 호환되지 않습니다.
Smart (Components) Toolkit이(가) 곧 Homey에 설치됩니다.
업데이트 로그
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
