Awtrix NG
밝기가 변경되면
AWTRIX
AWTRIX 3 and AWTRIX NG pixel clocks, including TC002
Connect your AWTRIX pixel clock to Homey and see notifications, sensor readings and custom apps from your smart home at a glance.
Supported clocks:
- AWTRIX 3: Ulanzi TC001 (32 × 8 pixels), compatible AWTRIX 2 mainboards and self-built ESP32 matrix clocks running AWTRIX 3.
- AWTRIX NG: TC002 (52 × 16 pixels) and compatible ESP32 matrix clocks running AWTRIX NG.
Use Homey Flow to show messages, icons and custom apps, adjust brightness and control the display. TC002 also supports layouts with a title and text, audio and radio controls, script settings and data, state Flow triggers, and physical button and knob events. Available features depend on the clock and firmware.
Your clock must already run the matching AWTRIX firmware. Add AWTRIX 3 clocks using Awtrix3 and TC002/AWTRIX NG clocks using Awtrix NG.
지원되는 디바이스
Flow 카드
위의 디바이스를 클릭하면 관련 Flow 카드만 표시됩니다.
언제...
Awtrix NG
Left button was pressed
Enable button callbacks in the AWTRIX NG device settings before using this trigger.
Awtrix NG
Middle button was pressed
Enable button callbacks in the AWTRIX NG device settings before using this trigger.
Awtrix NG
Right button was pressed
Enable button callbacks in the AWTRIX NG device settings before using this trigger.
Awtrix NG
Knob was pressed
Enable button callbacks in the AWTRIX NG device settings before using this trigger.
Awtrix NG
Knob was turned
Enable button callbacks in the AWTRIX NG device settings before using this trigger. The turn token is negative to the left and positive to the right.
Awtrix NG
The active application changed
Observed via HTTP every 5 seconds while this card is used. Initial load and reconnection do not trigger. Brief changes between observations may be missed. Uses rotation names, including homey-. Notifications do not change the active app.
Awtrix NG
Audio playback changed
Observed via HTTP every 5 seconds while this card is used. Initial load and reconnection do not trigger. Brief changes between observations may be missed.
Awtrix NG
Radio playback changed
Observed via HTTP every 5 seconds while this card is used. Initial load and reconnection do not trigger. Brief changes between observations may be missed.
Awtrix NG
A new playback error was observed
Observed via HTTP every 5 seconds while this card is used. Initial load and reconnection do not trigger. Brief changes between observations may be missed. The same persistent error is reported once. HTTP connectivity failures are logged separately.
Awtrix3
배터리 수준이 변경되면
Awtrix3
습도가 변경되면
Awtrix3
조도가 변경되면
Awtrix3
온도가 변경되면
그러면...
Awtrix NG
다음 밝기로 조절 %
Awtrix NG
상대 밝기 설정 %
제품의 현재 디밍 수준에 따라 어둡게 또는 밝게 설정돼요.
Awtrix NG
Create/update application app name message icon color JSON options
Create or update an application. Name must match A-Z, a-z, 0-9, _ or - and be at most 26 characters. Optional options must be device-specific JSON. Use Homey's Add duration option to override the JSON options or the device default duration.
Awtrix NG
Create/update raw application app name raw JSON payload
Create or update an application using a raw JSON payload. Enter the app name without the internal homey- prefix. This card is for advanced users and accepts only fields supported by the selected device.
Awtrix NG
Remove application app name
Remove application from device
Awtrix NG
Set display state
Enable or disable display
Awtrix NG
Show indicator location indicator with color color and effect effect for effect duration
Set an indicator. Effect duration is in milliseconds.
Awtrix NG
Hide indicator location indicator
Disable indicator
Awtrix NG
Send notification message with icon icon and color color
Send a notification. Use Homey's Add duration option to override the device default duration.
Awtrix NG
Dismiss notification
Dismiss permanent notification
Awtrix NG
Send raw notification raw JSON payload
Send a notification using a device-specific raw JSON payload. For AWTRIX NG, use NG-shaped JSON fields such as text and durationMs. For AWTRIX 3, use AWTRIX 3-shaped JSON fields such as text and duration.
Awtrix NG
Send sticky notification message with icon icon and color color
Send sticky notification to device with optional icon and color
Awtrix NG
Play melody melody
Play RTTTL melody
Awtrix NG
Set weather overlay overlay
Set the weather overlay shown on the display.
Awtrix NG
Play synthesized sound bpm 120; inst lead wave=pulse volume=40; lead: c4 e g c5
Play a synthesized sound once. On the new audio API it replaces the current alert; older firmware plays an fx effect.
Awtrix NG
Play MP3 MP3 URL
Download and play an MP3 once, without storing it. Maximum 4 MB and 120 seconds. This action finishes when playback ends and reports download errors. Replaces the current alert.
Awtrix NG
Play Soundboard MP3 Sound
Requires Soundboard and a local Homey address reachable from the clock. Plays once without copying to storage. MP3 only, maximum 120 seconds. Select the sound again if it was deleted and replaced.
Awtrix NG
Stop the current alert sound
Stops the alert group, including a URL or Soundboard sound. Script sounds and radio are controlled separately.
Awtrix NG
Show Icon (optional), Title in Title color above Text below the title, options JSON options
52×16 display: optional icon on the left, colored title above white text. Fitting text stays still; long rows scroll independently at the device scroll settings. Without timing options, long rows complete once. Add duration or JSON durationMs (milliseconds), not both. JSON must contain only timing and notification options such as name, hold, wakeup and sound. Visual fields and layout are rejected; use RAW for a custom layout.
Awtrix NG
Update app App name: Icon (optional), Title in Title color above Text below the title, options JSON options
52×16 display: optional icon on the left, colored title above white text. Fitting text stays still; long rows scroll independently at the device scroll settings. Without timing options, long rows complete once. Add duration or JSON durationMs (milliseconds), not both. JSON must contain only timing and app lifetime options; use the app name without homey-. Visual fields and layout are rejected; use RAW for a custom layout.
Awtrix NG
Set ... volume to Volume (%)%
The master and group levels multiply. Zero silences that group. Radio requires radio support.
Awtrix NG
Stop ... audio
Stops alerts, script sounds, radio or everything. An alert stop also cancels a URL sound being prepared.
Awtrix NG
Play radio station Station
Select a station saved on the clock. Radio continues until stopped. Alerts pause radio and it resumes afterwards.
Awtrix NG
Play radio Stream URL
MP3 streams only; M3U and PLS playlists are supported. Does not save a station. Radio continues until stopped.
Awtrix NG
Save station Station name with URL Stream URL
Adds a station or replaces the URL of the station with this exact name. Keeps the other stations. Up to 32 stations.
Awtrix NG
Send and play audio Audio file URL
Homey downloads and sends the file directly. MP3 or 16-bit PCM WAV, maximum 2 MiB. Plays once without storing. This action finishes when playback starts.
Awtrix NG
Send and play Soundboard file Sound
Requires Soundboard. Homey resolves the current file and sends it directly. MP3 or 16-bit PCM WAV, maximum 2 MiB; no stored copy. Finishes when playback starts.
Awtrix NG
Show script Script
Select a working, enabled script installed on the clock. Starts on-demand scripts. Next or previous app ends an on-demand script. Background scripts and modules are not shown.
Awtrix NG
Set panel brightness to Brightness (%)%
Sets manual brightness. Disables automatic brightness on devices with a light sensor. Does not switch display power.
Awtrix NG
Set Script setting Setting / key to Value
Uses declared settings. Text and select values are plain text; booleans true/false, numbers as numbers, colors #RRGGBB or integers. Out-of-range values fail. Saving restarts the script.
Awtrix NG
Read Script setting Setting / key
Returns a text Value token in Advanced Flow. Numbers and booleans are represented as JSON. A missing setting fails.
Advanced
Awtrix NG
Change Script stored data to JSON changes
Supply a non-empty JSON object. Only these keys change; null removes a key. Declared settings use a separate card. Saving restarts the script.
Awtrix NG
Read Script stored value Setting / key
Returns a text Value token in Advanced Flow. Structured data is JSON. A missing key fails.
Advanced
Awtrix NG
Read shared script value Shared value
Read-only. Returns a text Value token in Advanced Flow. Values disappear after script restart; a missing value fails.
Advanced
Awtrix NG
Dismiss notification Notification name
Removes the named notification even while waiting in the queue. Use the same name as in notification JSON. The reserved name active uses the existing active notification card. A missing name reports an error.
Awtrix NG
Read Text aloud
Requires an installed voice on the clock. Maximum 512 UTF-8 bytes. This action finishes when the playback request is accepted.
Awtrix NG
Play stored sound Sound name
Select an MP3 stored on the selected clock. Plays once as an alert. The action ends when the request is accepted.
Awtrix NG
Send Method to API endpoint with JSON JSON body
Advanced: enter a relative /api/v1/ endpoint, optionally with a query string. Leave JSON empty for no body; GET has no body. Uses the selected clock connection. Sends JSON unchanged without feature validation. HTTP errors fail the Flow. Privileged RAW access: responses and errors may expose secrets, including callback tokens. System writes bypass callback ownership checks. Uses the clock credentials stored in Homey. Responses are limited to 8 MiB.
Advanced
Awtrix3
Create/update application app name message icon color JSON options
Create or update an application. Name must match A-Z, a-z, 0-9, _ or - and be at most 26 characters. Optional options must be device-specific JSON. Use Homey's Add duration option to override the JSON options or the device default duration.
Awtrix3
Remove application app name
Remove application from device
Awtrix3
Set display state
Enable or disable display
Awtrix3
Show indicator location indicator with color color and effect effect for effect duration
Set an indicator. Effect duration is in milliseconds.
Awtrix3
Hide indicator location indicator
Disable indicator
Awtrix3
Send notification message with icon icon and color color
Send a notification. Use Homey's Add duration option to override the device default duration.
Awtrix3
Dismiss notification
Dismiss permanent notification
Awtrix3
Send raw notification raw JSON payload
Send a notification using a device-specific raw JSON payload. For AWTRIX NG, use NG-shaped JSON fields such as text and durationMs. For AWTRIX 3, use AWTRIX 3-shaped JSON fields such as text and duration.
Awtrix3
Send sticky notification message with icon icon and color color
Send sticky notification to device with optional icon and color
Awtrix3
Play melody melody
Play RTTTL melody
지원
이 앱에 문제가 있습니까? 개발자에게 연락하는 방법 Homey 커뮤니티 포럼.
새로운 기능
버전 2.3.8 — Play MP3 now uses autocomplete
업데이트 로그
Radovan Kepák 님에게 고맙다는 인사를 전해드리겠습니다!
Radovan Kepák 님께 앱을 잘 사용하고 있다고 알려주세요.
제안이 전송되었습니다.
제안을 보내주셨다고 Radovan Kepák 님에게 알리겠습니다.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
