3(4) in 1 Multi Sensor TSP01/TSM02
열림 감지 열리면
TKB Home
TKB Home devices for Homey
Controlling switches and wallplugs from TKB Home with Homey.
Code initially created by Remco Mengers, all credits to him for his fantastic work.
I've now taken over maintenance going forward.
As with the existing codebase, I don't have many of these devices.
Devices are added based on assumptions and full working of every device
is not guaranteed.
--- Current Supported devices: ---
TSM02, TSM10, TSP01, TZ04, TZ35, TZ36, TZ37, TZ55, TZ56, TZ57, TZ65, TZ66, TZ67, TZ67-PLUS, TZ68, TZ68-PLUS, TZ69, TZ74, TZ78, TZ88.
----- Device Specific Notes: -----
TZ35/TZ55/TZ65:
The Wall Dimmers need to be polled to get the correct dim state when you dim it with the switch itself.
The interval is by default on 300 seconds (5 minutes).
It is not recommended to put this below 60 seconds (1 minute), it might cause too much traffic.
You can also "immediately" update its state in homey, by just pressing any of the switches once.
The dim level takes about 2.5 seconds to update when switching on, since the dimmer ramps up slowly to its set brightness.
TZ67(-PLUS)/TZ68(-PLUS)/TZ69:
The wallplugs only use the polling interval if you use the button on the wallplug itself.
It is not recommended to put this below 60 seconds (1 minute), it might cause too much traffic.
TZ88:
It sends the wattage value when the load changes (more then) 5%.
This can't be edited and could cause of a lot of data if the load changes the power usage a lot.
All other manufacturers have this on at least 20% for this reason, so do keep this in mind.
The voltage and amperage don't get reported on intervals, added polling for this (by default poll is off to save traffic).
지원되는 디바이스
Flow 카드
위의 디바이스를 클릭하면 관련 Flow 카드만 표시됩니다.
언제...
3(4) in 1 Multi Sensor TSP01/TSM02
열림 감지 닫히면
3(4) in 1 Multi Sensor TSP01/TSM02
움직임이 감지되면
3(4) in 1 Multi Sensor TSP01/TSM02
움직임이 없으면
3(4) in 1 Multi Sensor TSP01/TSM02
변화가 감지되면
3(4) in 1 Multi Sensor TSP01/TSM02
변화 감지가 정상 상태이면
3(4) in 1 Multi Sensor TSP01/TSM02
온도가 변경되면
3(4) in 1 Multi Sensor TSP01/TSM02
배터리 수준이 변경되면
3(4) in 1 Multi Sensor TSP01/TSM02
The luminance level has changed
Dimmer TZ35/TZ55
켜지면
Dimmer TZ35/TZ55
꺼지면
Dimmer TZ35/TZ55
밝기가 변경되면
Dimmer TZ35/TZ55
Right switched on
Dimmer TZ35/TZ55
Right switched off
Dimmer TZ35/TZ55
Right switched 2x on
Dimmer TZ35/TZ55
Right switched 2x off
Dimmer TZ65
켜지면
Dimmer TZ65
꺼지면
Dimmer TZ65
밝기가 변경되면
Dimmer TZ65
Right switched on
Dimmer TZ65
Right switched off
Dimmer TZ65
Right switched 2x on
Dimmer TZ65
Right switched 2x off
Door/Window Sensor TSM10
열림 감지 열리면
Door/Window Sensor TSM10
열림 감지 닫히면
Door/Window Sensor TSM10
변화가 감지되면
Door/Window Sensor TSM10
변화 감지가 정상 상태이면
Door/Window Sensor TSM10
배터리 수준이 변경되면
Double Relay Switch (Metering) TZ04
켜지면
Double Relay Switch (Metering) TZ04
꺼지면
Double Relay Switch (Metering) TZ04
전력이 변경되면
Double Relay Switch (Metering) TZ04
전력량이 변경되면
Double Relay Switch TZ37/TZ57
켜지면
Double Relay Switch TZ37/TZ57
꺼지면
Double Relay Switch TZ74
켜지면
Double Relay Switch TZ74
꺼지면
Smart Energy Wallplug TZ69
켜지면
Smart Energy Wallplug TZ69
꺼지면
Smart Energy Wallplug TZ69
전력이 변경되면
Smart Energy Wallplug TZ69
전력량이 변경되면
Smart Energy Wallplug TZ69
전압이 변경되면
Smart Energy Wallplug TZ88
켜지면
Smart Energy Wallplug TZ88
꺼지면
Smart Energy Wallplug TZ88
전압이 변경되면
Smart Energy Wallplug TZ88
전류가 변경되면
Smart Energy Wallplug TZ88
전력이 변경되면
Smart Energy Wallplug TZ88
전력량이 변경되면
Smart Energy Wallplug TZ88
Overload (A) alarm activated
Switch TZ36/TZ56
켜지면
Switch TZ36/TZ56
꺼지면
Switch TZ36/TZ56
Right switched on
Switch TZ36/TZ56
Right switched off
Switch TZ36/TZ56
Right switched 2x on
Switch TZ36/TZ56
Right switched 2x off
Switch TZ66
켜지면
Switch TZ66
꺼지면
Switch TZ66
Right switched on
Switch TZ66
Right switched off
Switch TZ66
Right switched 2x on
Switch TZ66
Right switched 2x off
Thermostat TZE93
온도가 변경되면
Thermostat TZE93
희망 온도가 변경되면
Thermostat TZE96
온도가 변경되면
Thermostat TZE96
희망 온도가 변경되면
TZ78 In-Wall Single Relay Switch
켜지면
TZ78 In-Wall Single Relay Switch
꺼지면
Wallplug (Z-Wave Plus) TZ68-PLUS
켜지면
Wallplug (Z-Wave Plus) TZ68-PLUS
꺼지면
Wallplug Dimmer (Z-Wave Plus) TZ67
켜지면
Wallplug Dimmer (Z-Wave Plus) TZ67
꺼지면
Wallplug Dimmer (Z-Wave Plus) TZ67
밝기가 변경되면
Wallplug Dimmer TZ67
켜지면
Wallplug Dimmer TZ67
꺼지면
Wallplug Dimmer TZ67
밝기가 변경되면
Wallplug TZ68
켜지면
Wallplug TZ68
꺼지면
그리고...
3(4) in 1 Multi Sensor TSP01/TSM02
열림 감지 열리면
3(4) in 1 Multi Sensor TSP01/TSM02
움직임이 감지되면
3(4) in 1 Multi Sensor TSP01/TSM02
변화가 감지되면
Dimmer TZ35/TZ55
켜지면
Dimmer TZ65
켜지면
Door/Window Sensor TSM10
열림 감지 열리면
Door/Window Sensor TSM10
변화가 감지되면
Double Relay Switch (Metering) TZ04
켜지면
Double Relay Switch TZ37/TZ57
켜지면
Double Relay Switch TZ74
켜지면
Smart Energy Wallplug TZ69
켜지면
Smart Energy Wallplug TZ88
켜지면
Switch TZ36/TZ56
켜지면
Switch TZ66
켜지면
TZ78 In-Wall Single Relay Switch
켜지면
Wallplug (Z-Wave Plus) TZ68-PLUS
켜지면
Wallplug Dimmer (Z-Wave Plus) TZ67
켜지면
Wallplug Dimmer TZ67
켜지면
Wallplug TZ68
켜지면
그러면...
Dimmer TZ35/TZ55
켜기
Dimmer TZ35/TZ55
끄기
Dimmer TZ35/TZ55
켬/끔 상태 전환하기
Dimmer TZ35/TZ55
다음 밝기로 조절 %
Dimmer TZ35/TZ55
상대 밝기 설정 %
제품의 현재 디밍 수준에 따라 어둡게 또는 밝게 설정돼요.
Dimmer TZ65
켜기
Dimmer TZ65
끄기
Dimmer TZ65
켬/끔 상태 전환하기
Dimmer TZ65
다음 밝기로 조절 %
Dimmer TZ65
상대 밝기 설정 %
제품의 현재 디밍 수준에 따라 어둡게 또는 밝게 설정돼요.
Double Relay Switch (Metering) TZ04
켜기
Double Relay Switch (Metering) TZ04
끄기
Double Relay Switch (Metering) TZ04
켬/끔 상태 전환하기
Double Relay Switch (Metering) TZ04
Reset meter values
Reset the accumulated power usage value (kWh), note that this can not be reversed.
Double Relay Switch TZ37/TZ57
켜기
Double Relay Switch TZ37/TZ57
끄기
Double Relay Switch TZ37/TZ57
켬/끔 상태 전환하기
Double Relay Switch TZ74
켜기
Double Relay Switch TZ74
끄기
Double Relay Switch TZ74
켬/끔 상태 전환하기
Smart Energy Wallplug TZ69
켜기
Smart Energy Wallplug TZ69
끄기
Smart Energy Wallplug TZ69
켬/끔 상태 전환하기
Smart Energy Wallplug TZ69
Reset meter values
Reset the accumulated power usage value (kWh), note that this can not be reversed.
Smart Energy Wallplug TZ88
켜기
Smart Energy Wallplug TZ88
끄기
Smart Energy Wallplug TZ88
켬/끔 상태 전환하기
Smart Energy Wallplug TZ88
Reset meter values
Reset the accumulated power usage value (kWh), note that this can not be reversed.
Switch TZ36/TZ56
켜기
Switch TZ36/TZ56
끄기
Switch TZ36/TZ56
켬/끔 상태 전환하기
Switch TZ66
켜기
Switch TZ66
끄기
Switch TZ66
켬/끔 상태 전환하기
Thermostat TZE93
희망 온도 설정 °C
Thermostat TZE96
희망 온도 설정 °C
TZ78 In-Wall Single Relay Switch
켜기
TZ78 In-Wall Single Relay Switch
끄기
TZ78 In-Wall Single Relay Switch
켬/끔 상태 전환하기
Wallplug (Z-Wave Plus) TZ68-PLUS
켜기
Wallplug (Z-Wave Plus) TZ68-PLUS
끄기
Wallplug (Z-Wave Plus) TZ68-PLUS
켬/끔 상태 전환하기
Wallplug Dimmer (Z-Wave Plus) TZ67
켜기
Wallplug Dimmer (Z-Wave Plus) TZ67
끄기
Wallplug Dimmer (Z-Wave Plus) TZ67
켬/끔 상태 전환하기
Wallplug Dimmer (Z-Wave Plus) TZ67
다음 밝기로 조절 %
Wallplug Dimmer (Z-Wave Plus) TZ67
상대 밝기 설정 %
제품의 현재 디밍 수준에 따라 어둡게 또는 밝게 설정돼요.
Wallplug Dimmer TZ67
켜기
Wallplug Dimmer TZ67
끄기
Wallplug Dimmer TZ67
켬/끔 상태 전환하기
Wallplug Dimmer TZ67
다음 밝기로 조절 %
Wallplug Dimmer TZ67
상대 밝기 설정 %
제품의 현재 디밍 수준에 따라 어둡게 또는 밝게 설정돼요.
Wallplug TZ68
켜기
Wallplug TZ68
끄기
Wallplug TZ68
켬/끔 상태 전환하기
지원
이 앱에 문제가 있습니까? 개발자에게 문의하려면 여기를 클릭하세요..
새로운 기능
버전 3.1.0 — Added TZE93 Thermostat
업데이트 로그
Phil Shotton 님에게 고맙다는 인사를 전해드리겠습니다!
Phil Shotton 님께 앱을 잘 사용하고 있다고 알려주세요.
제안이 전송되었습니다.
제안을 보내주셨다고 Phil Shotton 님에게 알리겠습니다.
