Starlink

This app connects to your dish over the local network using its built-in gRPC API — no cloud, no account, no extra hardware. As long as your Homey can reach the dish at 192.168.100.1, it works. Works with all current Starlink models, including Standard, Mini and High Performance. What you get: - Live download and upload throughput - Ping latency and packet loss - Obstruction percentage and current obstruction status - Dish state (connected, searching, booting, stowed, thermal shutdown, etc.) - Dish orientation (azimuth, elevation) - Altitude and GPS satellite count (if location sharing is enabled on the dish) - Uptime - Alarms for heating, thermal throttling, slow ethernet, roaming, unexpected location, obstructions, low SNR and missing GPS fix All numeric values and alarms are logged to Insights for historical graphs. Setup: 1. Make sure your Homey and dish are on the same network, or that the dish is reachable at 192.168.100.1 from Homey. 2. Add the device. The default address (192.168.100.1:9200) is pre-filled. 3. If your dish uses a different address, change it in the device's settings. Notes: - Altitude requires "Allow Access on Local Network" to be enabled in the Starlink app. Without it, altitude will stay empty and the rest keeps working. - Data refreshes every 30 seconds.