HomeFlux EMS
Battery Balance warning
HomeFlux EMS
Your energy, managed differently
경고! 이 앱이 제대로 작동하지 않을 수 있습니다.
이 앱 버전은 현재 테스트 중이며 아직 검토되지 않았습니다. 기대한 대로 작동하지 않을 수 있습니다.
이 앱을 설치할 때는 각별히 주의하세요.
Your energy, managed differently
HomeFlux EMS brings your home’s energy together in one smart system. It decides when to charge or use your home battery, when to make the most of solar power, and when flexible loads such as EV charging, heating, cooling or hot water can run most efficiently.
Instead of being tied to one brand or one type of installation, HomeFlux works around the devices you already have and the energy contract you use. It supports both dynamic energy contracts and fixed contracts with different tariff periods, such as peak, off-peak or multi-rate schedules.
It continuously balances comfort, self-consumption, battery reserve, electricity prices and grid limits, while Peak Guard keeps peak consumption under control.
The result is simple: use more of your own energy, buy from the grid at better moments, avoid unnecessary peaks and let HomeFlux coordinate everything automatically.
지원되는 디바이스
Flow 카드
위의 디바이스를 클릭하면 관련 Flow 카드만 표시됩니다.
언제...
Fires when battery SoC spread keeps increasing while balancing is actively controlling the batteries.
HomeFlux EMS
Battery commands are updated
Fires when HomeFlux EMS publishes a new set of battery power commands.
HomeFlux EMS
New battery setpoint calculated
Fires when HomeFlux EMS calculates a different battery setpoint, before the minimum command interval decides when it may be published.
HomeFlux EMS
Boiler power command is updated
Use the boolean token to switch the boiler or store its current HomeFlux state in a Logic variable.
HomeFlux EMS
Boiler warmed status is updated
The boolean token is Yes while HomeFlux still considers the boiler warmed after a completed heating cycle.
HomeFlux EMS
Charge plan is updated
Fires when HomeFlux decides or changes the overnight charge plan. Use the Charge plan token with Homey's standard Logic action to write it to a text variable.
HomeFlux EMS
EMS status changed
Fires when the compact HomeFlux EMS status line changes.
HomeFlux EMS
EV 1 charge current is updated
Use this output to set the EV charger current. Peak Guard can always reduce it.
HomeFlux EMS
EV 1 charge mode is updated
For chargers that are controlled with modes instead of amperes. Map stop/smart/standard to the matching charger actions.
HomeFlux EMS
EV 1 charging permission is updated
HomeFlux EMS
EV 2 charge current is updated
Use this output to set the EV 2 charger current. Peak Guard can always reduce it.
HomeFlux EMS
EV 2 charge mode is updated
For chargers that are controlled with modes instead of amperes. Map stop/smart/standard to the matching charger actions.
HomeFlux EMS
EV 2 charging permission is updated
HomeFlux EMS
EV 3 charge current is updated
Use this output to set the EV 3 charger current. Peak Guard can always reduce it.
HomeFlux EMS
EV 3 charge mode is updated
For chargers that are controlled with modes instead of amperes. Map stop/smart/standard to the matching charger actions.
HomeFlux EMS
EV 3 charging permission is updated
HomeFlux EMS
EV 4 charge current is updated
Use this output to set the EV 4 charger current. Peak Guard can always reduce it.
HomeFlux EMS
EV 4 charge mode is updated
For chargers that are controlled with modes instead of amperes. Map stop/smart/standard to the matching charger actions.
HomeFlux EMS
EV 4 charging permission is updated
HomeFlux EMS
HVAC 1 fan command is updated
HomeFlux EMS
HVAC 1 mode command is updated
HomeFlux EMS
HVAC 1 power command is updated
HomeFlux EMS
HVAC 1 setpoint command is updated
HomeFlux EMS
HVAC 2 fan command is updated
HomeFlux EMS
HVAC 2 mode command is updated
HomeFlux EMS
HVAC 2 power command is updated
HomeFlux EMS
HVAC 2 setpoint command is updated
HomeFlux EMS
HVAC 3 fan command is updated
HomeFlux EMS
HVAC 3 mode command is updated
HomeFlux EMS
HVAC 3 power command is updated
HomeFlux EMS
HVAC 3 setpoint command is updated
HomeFlux EMS
HVAC 4 fan command is updated
HomeFlux EMS
HVAC 4 mode command is updated
HomeFlux EMS
HVAC 4 power command is updated
HomeFlux EMS
HVAC 4 setpoint command is updated
HomeFlux EMS
PV power limit is updated
Use the percentage token to limit PV/inverter output. 100% is unrestricted; HomeFlux never commands below 10%.
HomeFlux EMS
Request Battery 1 SoC is needed
Fires every 3 minutes and once at app start when this battery is configured. Send its current SoC to HomeFlux EMS.
HomeFlux EMS
Request Battery 2 SoC is needed
Fires every 3 minutes and once at app start when this battery is configured. Send its current SoC to HomeFlux EMS.
HomeFlux EMS
Request Battery 3 SoC is needed
Fires every 3 minutes and once at app start when this battery is configured. Send its current SoC to HomeFlux EMS.
HomeFlux EMS
Request Battery 4 SoC is needed
Fires every 3 minutes and once at app start when this battery is configured. Send its current SoC to HomeFlux EMS.
HomeFlux EMS
Request Battery 5 SoC is needed
Fires every 3 minutes and once at app start when this battery is configured. Send its current SoC to HomeFlux EMS.
HomeFlux EMS
Request Battery 6 SoC is needed
Fires every 3 minutes and once at app start when this battery is configured. Send its current SoC to HomeFlux EMS.
HomeFlux EMS
Request Battery 7 SoC is needed
Fires every 3 minutes and once at app start when this battery is configured. Send its current SoC to HomeFlux EMS.
HomeFlux EMS
Request Battery 8 SoC is needed
Fires every 3 minutes and once at app start when this battery is configured. Send its current SoC to HomeFlux EMS.
HomeFlux EMS
EV 1 SoC is needed
Fires every 3 minutes and once after enabling EV SoC support. It stops completely when EV SoC support is disabled.
HomeFlux EMS
EV 2 SoC is needed
Fires every 3 minutes and once after enabling EV 2 SoC support. It stops completely when EV 2 SoC support is disabled.
HomeFlux EMS
EV 3 SoC is needed
Fires every 3 minutes and once after enabling EV 3 SoC support. It stops completely when EV 3 SoC support is disabled.
HomeFlux EMS
EV 4 SoC is needed
Fires every 3 minutes and once after enabling EV 4 SoC support. It stops completely when EV 4 SoC support is disabled.
HomeFlux EMS
Request forecast is needed
Fires every 30 minutes and once at app start. Use it to send the remaining PV forecast to HomeFlux EMS.
HomeFlux EMS
Tomorrow PV forecast is needed
Fires every 30 minutes and once at app start. Use it to send tomorrow's total PV forecast to HomeFlux EMS.
HomeFlux EMS
Request PV power is needed
Fires every 15 seconds and once at app start. Use it to send the latest PV power to HomeFlux EMS.
HomeFlux EMS
Battery 1: switch to charge mode
Only fires when split command is enabled for battery 1 and HomeFlux needs charge mode. Power follows 1 second after an allowed mode switch.
HomeFlux EMS
Battery 1: charge power is updated
Use the power token for battery 1 charge power. After a charge-mode switch this fires 1 second later.
HomeFlux EMS
Battery 1: switch to discharge mode
Only fires when split command is enabled for battery 1 and HomeFlux needs discharge mode. Power follows 1 second after an allowed mode switch.
HomeFlux EMS
Battery 1: discharge power is updated
Use the power token for battery 1 discharge power. After a discharge-mode switch this fires 1 second later.
HomeFlux EMS
Battery 2: switch to charge mode
Only fires when split command is enabled for battery 2 and HomeFlux needs charge mode. Power follows 1 second after an allowed mode switch.
HomeFlux EMS
Battery 2: charge power is updated
Use the power token for battery 2 charge power. After a charge-mode switch this fires 1 second later.
HomeFlux EMS
Battery 2: switch to discharge mode
Only fires when split command is enabled for battery 2 and HomeFlux needs discharge mode. Power follows 1 second after an allowed mode switch.
HomeFlux EMS
Battery 2: discharge power is updated
Use the power token for battery 2 discharge power. After a discharge-mode switch this fires 1 second later.
HomeFlux EMS
Battery 3: switch to charge mode
Only fires when split command is enabled for battery 3 and HomeFlux needs charge mode. Power follows 1 second after an allowed mode switch.
HomeFlux EMS
Battery 3: charge power is updated
Use the power token for battery 3 charge power. After a charge-mode switch this fires 1 second later.
HomeFlux EMS
Battery 3: switch to discharge mode
Only fires when split command is enabled for battery 3 and HomeFlux needs discharge mode. Power follows 1 second after an allowed mode switch.
HomeFlux EMS
Battery 3: discharge power is updated
Use the power token for battery 3 discharge power. After a discharge-mode switch this fires 1 second later.
HomeFlux EMS
Battery 4: switch to charge mode
Only fires when split command is enabled for battery 4 and HomeFlux needs charge mode. Power follows 1 second after an allowed mode switch.
HomeFlux EMS
Battery 4: charge power is updated
Use the power token for battery 4 charge power. After a charge-mode switch this fires 1 second later.
HomeFlux EMS
Battery 4: switch to discharge mode
Only fires when split command is enabled for battery 4 and HomeFlux needs discharge mode. Power follows 1 second after an allowed mode switch.
HomeFlux EMS
Battery 4: discharge power is updated
Use the power token for battery 4 discharge power. After a discharge-mode switch this fires 1 second later.
HomeFlux EMS
Battery 5: switch to charge mode
Only fires when split command is enabled for battery 5 and HomeFlux needs charge mode. Power follows 1 second after an allowed mode switch.
HomeFlux EMS
Battery 5: charge power is updated
Use the power token for battery 5 charge power. After a charge-mode switch this fires 1 second later.
HomeFlux EMS
Battery 5: switch to discharge mode
Only fires when split command is enabled for battery 5 and HomeFlux needs discharge mode. Power follows 1 second after an allowed mode switch.
HomeFlux EMS
Battery 5: discharge power is updated
Use the power token for battery 5 discharge power. After a discharge-mode switch this fires 1 second later.
HomeFlux EMS
Battery 6: switch to charge mode
Only fires when split command is enabled for battery 6 and HomeFlux needs charge mode. Power follows 1 second after an allowed mode switch.
HomeFlux EMS
Battery 6: charge power is updated
Use the power token for battery 6 charge power. After a charge-mode switch this fires 1 second later.
HomeFlux EMS
Battery 6: switch to discharge mode
Only fires when split command is enabled for battery 6 and HomeFlux needs discharge mode. Power follows 1 second after an allowed mode switch.
HomeFlux EMS
Battery 6: discharge power is updated
Use the power token for battery 6 discharge power. After a discharge-mode switch this fires 1 second later.
HomeFlux EMS
Battery 7: switch to charge mode
Only fires when split command is enabled for battery 7 and HomeFlux needs charge mode. Power follows 1 second after an allowed mode switch.
HomeFlux EMS
Battery 7: charge power is updated
Use the power token for battery 7 charge power. After a charge-mode switch this fires 1 second later.
HomeFlux EMS
Battery 7: switch to discharge mode
Only fires when split command is enabled for battery 7 and HomeFlux needs discharge mode. Power follows 1 second after an allowed mode switch.
HomeFlux EMS
Battery 7: discharge power is updated
Use the power token for battery 7 discharge power. After a discharge-mode switch this fires 1 second later.
HomeFlux EMS
Battery 8: switch to charge mode
Only fires when split command is enabled for battery 8 and HomeFlux needs charge mode. Power follows 1 second after an allowed mode switch.
HomeFlux EMS
Battery 8: charge power is updated
Use the power token for battery 8 charge power. After a charge-mode switch this fires 1 second later.
HomeFlux EMS
Battery 8: switch to discharge mode
Only fires when split command is enabled for battery 8 and HomeFlux needs discharge mode. Power follows 1 second after an allowed mode switch.
HomeFlux EMS
Battery 8: discharge power is updated
Use the power token for battery 8 discharge power. After a discharge-mode switch this fires 1 second later.
그리고...
HomeFlux EMS
Water heater output is on
HomeFlux EMS
Water heater is marked warm
HomeFlux EMS
EMS action is Action
HomeFlux EMS
Average battery SoC is above SoC (%)%
HomeFlux EMS
Battery group is Battery state
HomeFlux EMS
EMS control is enabled
HomeFlux EMS
Current tariff is Tariff name
HomeFlux EMS
EMS mode is Mode
HomeFlux EMS
Peak Guard is actively limiting
HomeFlux EMS
Planning phase is Planning phase
HomeFlux EMS
Price data is current
HomeFlux EMS
PV power is above Power (W) W
HomeFlux EMS
HomeFlux allows EV to charge
HomeFlux EMS
EV is charging
HomeFlux EMS
EV is connected
HomeFlux EMS
EV mode is Mode
HomeFlux EMS
Current slot is inside the cheapest consecutive Hours hour block today
HomeFlux EMS
Current Homey Energy price is among the Hours cheapest hours today
HomeFlux EMS
Current Homey Energy price is among the Hours most expensive hours today
HomeFlux EMS
HVAC is actively managed
그러면...
HomeFlux EMS
Get current HomeFlux EMS status
Returns the current EMS status as tokens. Connect the status token to Homey's own Logic card to write it to a text variable.
Advanced
HomeFlux EMS
Recalculate EMS now
HomeFlux EMS
Refresh Homey Energy prices
Refreshes Homey's own dynamic electricity price data for monitoring.
HomeFlux EMS
Set Battery SoC to SoC (%)%
HomeFlux EMS
EV 1 override for one session: EV 1 operating mode
Temporarily use the selected EV 1 operating mode for one connection session. If the EV 1 is already connected, the override ends when it disconnects. If it is disconnected, the override waits for the next connect → disconnect cycle. The configured EV 1 mode is never overwritten.
HomeFlux EMS
Set EV 1 SoC to EV 1 SoC (%)%
Push the current EV 1 state of charge to HomeFlux. Only used when EV 1 SoC support is enabled in settings.
HomeFlux EMS
Set EV 1: EV 1 available, Actual charge current (A) A
Push EV 1 availability and actual charging current to HomeFlux. EV 1 SoC has its own Flow card.
HomeFlux EMS
EV 2 override for one session: EV 2 operating mode
Temporarily use the selected EV 2 operating mode for one connection session. If the EV 2 is already connected, the override ends when it disconnects. If it is disconnected, the override waits for the next connect → disconnect cycle. The configured EV 2 mode is never overwritten.
HomeFlux EMS
Set EV 2 SoC to EV 2 SoC (%)%
Push the current EV 2 state of charge to HomeFlux. Only used when EV 2 SoC support is enabled in settings.
HomeFlux EMS
Set EV 2: EV 2 available, Actual charge current (A) A
Push EV 2 availability and actual charging current to HomeFlux. EV 2 SoC has its own Flow card.
HomeFlux EMS
EV 3 override for one session: EV 3 operating mode
Temporarily use the selected EV 3 operating mode for one connection session. If the EV 3 is already connected, the override ends when it disconnects. If it is disconnected, the override waits for the next connect → disconnect cycle. The configured EV 3 mode is never overwritten.
HomeFlux EMS
Set EV 3 SoC to EV 3 SoC (%)%
Push the current EV 3 state of charge to HomeFlux. Only used when EV 3 SoC support is enabled in settings.
HomeFlux EMS
Set EV 3: EV 3 available, Actual charge current (A) A
Push EV 3 availability and actual charging current to HomeFlux. EV 3 SoC has its own Flow card.
HomeFlux EMS
EV 4 override for one session: EV 4 operating mode
Temporarily use the selected EV 4 operating mode for one connection session. If the EV 4 is already connected, the override ends when it disconnects. If it is disconnected, the override waits for the next connect → disconnect cycle. The configured EV 4 mode is never overwritten.
HomeFlux EMS
Set EV 4 SoC to EV 4 SoC (%)%
Push the current EV 4 state of charge to HomeFlux. Only used when EV 4 SoC support is enabled in settings.
HomeFlux EMS
Set EV 4: EV 4 available, Actual charge current (A) A
Push EV 4 availability and actual charging current to HomeFlux. EV 4 SoC has its own Flow card.
HomeFlux EMS
Set EMS mode to Mode
HomeFlux EMS
Set remaining PV forecast to Remaining PV (kWh) kWh
HomeFlux EMS
Set tomorrow PV forecast to Tomorrow PV (kWh) kWh
HomeFlux EMS
Set grid power to Grid power (W) W
Positive is grid import, negative is export.
HomeFlux EMS
Set HVAC outdoor temperature to Outdoor temperature for all HVACs (C) C
HomeFlux EMS
Set HVAC 1 automatic control to Automatic control
HomeFlux EMS
Set HVAC 1 fan speed to Fan speed value
HomeFlux EMS
Set HVAC 1 mode to Mode
HomeFlux EMS
Set HVAC 1 room temperature to Room temperature (C) C
HomeFlux EMS
Set HVAC 1 setpoint to Setpoint (C) C
HomeFlux EMS
Set HVAC 2 automatic control to Automatic control
HomeFlux EMS
Set HVAC 2 fan speed to Fan speed value
HomeFlux EMS
Set HVAC 2 mode to Mode
HomeFlux EMS
Set HVAC 2 room temperature to Room temperature (C) C
HomeFlux EMS
Set HVAC 2 setpoint to Setpoint (C) C
HomeFlux EMS
Set HVAC 3 automatic control to Automatic control
HomeFlux EMS
Set HVAC 3 fan speed to Fan speed value
HomeFlux EMS
Set HVAC 3 mode to Mode
HomeFlux EMS
Set HVAC 3 room temperature to Room temperature (C) C
HomeFlux EMS
Set HVAC 3 setpoint to Setpoint (C) C
HomeFlux EMS
Set HVAC 4 automatic control to Automatic control
HomeFlux EMS
Set HVAC 4 fan speed to Fan speed value
HomeFlux EMS
Set HVAC 4 mode to Mode
HomeFlux EMS
Set HVAC 4 room temperature to Room temperature (C) C
HomeFlux EMS
Set HVAC 4 setpoint to Setpoint (C) C
HomeFlux EMS
Imported energy today is Imported energy today (kWh) kWh
Send the cumulative grid-import energy for today in kWh. HomeFlux uses it only to proportionally correct the live calculated grid-consumption and battery-charging totals for Savings.
HomeFlux EMS
Set PV power to PV power (W) W
위젯
지원
이 앱에 문제가 있습니까? 개발자에게 문의하려면 여기를 클릭하세요..
새로운 기능
버전 0.5.2 — Improved: EMS status widget now shows a reason for every battery decision, displays the next tariff with both clock time and remaining time, and shows estimated time to the battery target while charging or to Safety SoC while discharging. No battery-control logic changes.
HomeFlux EMS
이 앱으로 Homey 전체를 관리할 수 있습니다.
선택하신 Homey에 HomeFlux EMS이(가) 호환되지 않습니다.
HomeFlux EMS이(가) 곧 Homey에 설치됩니다.
업데이트 로그
Davy Bert 님에게 고맙다는 인사를 전해드리겠습니다!
Davy Bert 님께 앱을 잘 사용하고 있다고 알려주세요.
제안이 전송되었습니다.
제안을 보내주셨다고 Davy Bert 님에게 알리겠습니다.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
