Zigbee Bastien

Private Zigbee house app for Bastien — local Homey Pro only. Learnings promote upstream to Universal Tuya / Stable (never the reverse wholesale).

경고! 이 앱이 제대로 작동하지 않을 수 있습니다.

이 앱 버전은 현재 테스트 중이며 아직 검토되지 않았습니다. 기대한 대로 작동하지 않을 수 있습니다.
이 앱을 설치할 때는 각별히 주의하세요.

« 일반 버전으로 돌아가기

Private Zigbee house app for Bastien — local Homey Pro only. Learnings promote upstream to Universal Tuya / Stable (never the reverse wholesale).

자세히 읽기 ›

지원되는 디바이스

Flow 카드

위의 디바이스를 클릭하면 관련 Flow 카드만 표시됩니다.

언제...

1-Gang Smart Switch
켜지면
1-Gang Smart Switch
꺼지면
1-Gang Smart Switch
소비 전력이 변경되면
1-Gang Smart Switch
전력량이 변경되면
1-Gang Smart Switch
전압이 변경되면
1-Gang Smart Switch
전류가 변경되면
1-Gang Smart Switch
Turned on
1-Gang Smart Switch
Turned off
1-Gang Smart Switch
Physical ON
1-Gang Smart Switch
Physical OFF
1-Gang Smart Switch
Turned on physically - gang 1
1-Gang Smart Switch
Turned off physically - gang 1
1-Gang Smart Switch
Power changed
1-Gang Smart Switch
Energy changed
1-Gang Smart Switch
Voltage changed
1-Gang Smart Switch
Current changed
2-Buttons Wireless Controller
배터리 수준이 변경되면
2-Buttons Wireless Controller
Button pressed Button
2-Buttons Wireless Controller
Button double-pressed Button
2-Buttons Wireless Controller
Button long-pressed Button
2-Buttons Wireless Controller
Button multi-pressed Button
2-Buttons Wireless Controller
Button 1 pressed
2-Buttons Wireless Controller
Button 1 double-pressed
2-Buttons Wireless Controller
Button 1 long-pressed
2-Buttons Wireless Controller
Button 2 pressed
2-Buttons Wireless Controller
Button 2 double-pressed
2-Buttons Wireless Controller
Button 2 long-pressed
2-Buttons Wireless Controller
Button 1 triple-pressed
2-Buttons Wireless Controller
Button 2 triple-pressed
2-Buttons Wireless Controller
Button 1 released - after hold
2-Buttons Wireless Controller
Button 2 released - after hold
2-Buttons Wireless Controller
Battery low
2-Buttons Wireless Controller
The battery level changed
i
Fires when measure_battery updates (passive ZCL — no press TX). Token = new %.
2-Buttons Wireless Controller
Button 2 scene [[scene_id]] recalled ({scene_id})
i
When button 2 recalls a Zigbee scene (cluster 0x05 — scene mode, P31)
2-Buttons Wireless Controller
Physical button on
2-Buttons Wireless Controller
Physical button off
2-Gang Smart Switch
켜지면
2-Gang Smart Switch
꺼지면
2-Gang Smart Switch
소비 전력이 변경되면
2-Gang Smart Switch
전압이 변경되면
2-Gang Smart Switch
전류가 변경되면
2-Gang Smart Switch
전력량이 변경되면
2-Gang Smart Switch
Gang 1 turned on
2-Gang Smart Switch
Gang 1 turned off
2-Gang Smart Switch
Gang 2 turned on
2-Gang Smart Switch
Gang 2 turned off
2-Gang Smart Switch
Physical gang 1 ON
2-Gang Smart Switch
Physical gang 1 OFF
2-Gang Smart Switch
Physical gang 2 ON
2-Gang Smart Switch
Physical gang 2 OFF
2-Gang Smart Switch
Power changed
2-Gang Smart Switch
Voltage changed
2-Gang Smart Switch
Current changed
2-Gang Smart Switch
Energy changed
3-Gang Smart Switch
켜지면
3-Gang Smart Switch
꺼지면
3-Gang Smart Switch
소비 전력이 변경되면
3-Gang Smart Switch
전력량이 변경되면
3-Gang Smart Switch
Gang 1 turned on
3-Gang Smart Switch
Gang 1 turned off
3-Gang Smart Switch
Gang 2 turned on
3-Gang Smart Switch
Gang 2 turned off
3-Gang Smart Switch
Gang 3 turned on
3-Gang Smart Switch
Gang 3 turned off
3-Gang Smart Switch
Physical gang 1 ON
i
Physical button turns ON gang 1
3-Gang Smart Switch
Physical gang 1 OFF
3-Gang Smart Switch
Physical gang 2 ON
3-Gang Smart Switch
Physical gang 2 OFF
3-Gang Smart Switch
Physical gang 3 ON
3-Gang Smart Switch
Physical gang 3 OFF
3-Gang Smart Switch
Gang 1 scene triggered
3-Gang Smart Switch
Gang 2 scene triggered
3-Gang Smart Switch
Gang 3 scene triggered
3-Gang Smart Switch
Power changed
3-Gang Smart Switch
Energy changed
4-Buttons TS0041 Wireless Controller
배터리 수준이 변경되면
4-Buttons TS0041 Wireless Controller
A button was pressed
i
Triggers when any button is pressed. Use the button token in your flow.
4-Buttons TS0041 Wireless Controller
A button was double-pressed
i
Triggers when any button is double-pressed.
4-Buttons TS0041 Wireless Controller
A button was long-pressed
i
Triggers when any button is long-pressed.
4-Buttons TS0041 Wireless Controller
A button was multi-pressed
i
Triggers when any button is pressed multiple times.
4-Buttons TS0041 Wireless Controller
Button 1 pressed
4-Buttons TS0041 Wireless Controller
Button 1 double-pressed
4-Buttons TS0041 Wireless Controller
Button 1 long-pressed
4-Buttons TS0041 Wireless Controller
Button 2 pressed
4-Buttons TS0041 Wireless Controller
Button 2 double-pressed
4-Buttons TS0041 Wireless Controller
Button 2 long-pressed
4-Buttons TS0041 Wireless Controller
Button 3 pressed
4-Buttons TS0041 Wireless Controller
Button 3 double-pressed
4-Buttons TS0041 Wireless Controller
Button 3 long-pressed
4-Buttons TS0041 Wireless Controller
Button 4 pressed
4-Buttons TS0041 Wireless Controller
Button 4 double-pressed
4-Buttons TS0041 Wireless Controller
Button 4 long-pressed
4-Buttons TS0041 Wireless Controller
Button 1 triple-pressed
4-Buttons TS0041 Wireless Controller
Button 2 triple-pressed
4-Buttons TS0041 Wireless Controller
Button 3 triple-pressed
4-Buttons TS0041 Wireless Controller
Button 4 triple-pressed
4-Buttons TS0041 Wireless Controller
Button 1 released - after hold
4-Buttons TS0041 Wireless Controller
Button 2 released - after hold
4-Buttons TS0041 Wireless Controller
Button 3 released - after hold
4-Buttons TS0041 Wireless Controller
Button 4 released - after hold
4-Buttons TS0041 Wireless Controller
Battery low
4-Buttons TS0041 Wireless Controller
The battery level changed
i
Fires when measure_battery updates (passive ZCL). Token = new %.
4-Buttons Wireless Controller
배터리 수준이 변경되면
4-Buttons Wireless Controller
Button pressed Button
i
Triggers when any button is pressed. Use the button token in your flow.
4-Buttons Wireless Controller
Button double-pressed Button
i
Triggers when any button is double-pressed.
4-Buttons Wireless Controller
Button long-pressed Button
i
Triggers when any button is long-pressed.
4-Buttons Wireless Controller
Button multi-pressed Button
i
Triggers when any button is pressed multiple times.
4-Buttons Wireless Controller
Button 1 pressed
4-Buttons Wireless Controller
Button 1 double-pressed
4-Buttons Wireless Controller
Button 1 long-pressed
4-Buttons Wireless Controller
Button 2 pressed
4-Buttons Wireless Controller
Button 2 double-pressed
4-Buttons Wireless Controller
Button 2 long-pressed
4-Buttons Wireless Controller
Button 3 pressed
4-Buttons Wireless Controller
Button 3 double-pressed
4-Buttons Wireless Controller
Button 3 long-pressed
4-Buttons Wireless Controller
Button 4 pressed
4-Buttons Wireless Controller
Button 4 double-pressed
4-Buttons Wireless Controller
Button 4 long-pressed
4-Buttons Wireless Controller
Button 1 triple-pressed
4-Buttons Wireless Controller
Button 2 triple-pressed
4-Buttons Wireless Controller
Button 3 triple-pressed
4-Buttons Wireless Controller
Button 4 triple-pressed
4-Buttons Wireless Controller
Button 1 released - after hold
4-Buttons Wireless Controller
Button 2 released - after hold
4-Buttons Wireless Controller
Button 3 released - after hold
4-Buttons Wireless Controller
Button 4 released - after hold
4-Buttons Wireless Controller
Battery low
4-Buttons Wireless Controller
The battery level changed
i
Fires when measure_battery updates (passive ZCL). Token = new %.
4-Buttons Wireless Controller
Button 4 scene [[scene_id]] recalled ({scene_id})
i
When button 4 recalls a Zigbee scene (cluster 0x05 — scene mode, P31)
4-Buttons Wireless Controller
Physical button on
4-Buttons Wireless Controller
Physical button off
4-Buttons Wireless Controller
FUT089Z remote: ON pressed Zone
4-Buttons Wireless Controller
FUT089Z remote: OFF pressed Zone
4-Buttons Wireless Controller
FUT089Z remote: Brightness set Zone
4-Buttons Wireless Controller
FUT089Z remote: Colour temperature set Zone
4-Buttons Wireless Controller
FUT089Z remote: Colour set Zone
4-Buttons Wireless Controller
FUT089Z remote: Scene button pressed Zone
4-Gang Smart Switch
켜지면
4-Gang Smart Switch
꺼지면
4-Gang Smart Switch
소비 전력이 변경되면
4-Gang Smart Switch
전력량이 변경되면
4-Gang Smart Switch
전압이 변경되면
4-Gang Smart Switch
전류가 변경되면
4-Gang Smart Switch
Gang 1 turned on
4-Gang Smart Switch
Gang 1 turned off
4-Gang Smart Switch
Gang 2 turned on
4-Gang Smart Switch
Gang 2 turned off
4-Gang Smart Switch
Gang 3 turned on
4-Gang Smart Switch
Gang 3 turned off
4-Gang Smart Switch
Gang 4 turned on
4-Gang Smart Switch
Gang 4 turned off
4-Gang Smart Switch
Physical gang 1 ON
4-Gang Smart Switch
Physical gang 1 OFF
4-Gang Smart Switch
Physical gang 2 ON
4-Gang Smart Switch
Physical gang 2 OFF
4-Gang Smart Switch
Physical gang 3 ON
4-Gang Smart Switch
Physical gang 3 OFF
4-Gang Smart Switch
Physical gang 4 ON
4-Gang Smart Switch
Physical gang 4 OFF
4-Gang Smart Switch
Gang 1 single press
4-Gang Smart Switch
Gang 1 double press
4-Gang Smart Switch
Gang 1 long press
4-Gang Smart Switch
Gang 1 triple press
4-Gang Smart Switch
Gang 2 single press
4-Gang Smart Switch
Gang 2 double press
4-Gang Smart Switch
Gang 2 long press
4-Gang Smart Switch
Gang 2 triple press
4-Gang Smart Switch
Gang 3 single press
4-Gang Smart Switch
Gang 3 double press
4-Gang Smart Switch
Gang 3 long press
4-Gang Smart Switch
Gang 3 triple press
4-Gang Smart Switch
Gang 4 single press
4-Gang Smart Switch
Gang 4 double press
4-Gang Smart Switch
Gang 4 long press
4-Gang Smart Switch
Gang 4 triple press
4-Gang Smart Switch
Power changed
Climate Sensor
온도가 변경되면
Climate Sensor
습도가 변경되면
Climate Sensor
배터리 수준이 변경되면
Climate Sensor
전압이 변경되면
Climate Sensor
Temperature changed
Climate Sensor
Humidity changed
Climate Sensor
Battery low
Climate Sensor
Temperature too high
Climate Sensor
Temperature too low
Climate Sensor
Humidity too high
Climate Sensor
Humidity too low
Climate Sensor
Temperature changed
Climate Sensor
Battery voltage changed
i
Triggers when the battery voltage changes (V). For Z2M-standard Zigbee devices like _TZ3000_fllyghyj (WSD500A) and similar.
Climate Sensor
Scene triggered
Contact Sensor
열림 감지 열리면
Contact Sensor
열림 감지 닫히면
Contact Sensor
배터리 수준이 변경되면
Contact Sensor
변화가 감지되면
Contact Sensor
변화 감지가 정상 상태이면
Contact Sensor
조도가 변경되면
Contact Sensor
Door/window opened
i
Triggers when the magnet separates from the sensor
Contact Sensor
Door/window closed
i
Triggers when the magnet contacts the sensor
Contact Sensor
Tamper alert
i
Triggers when the sensor has been tampered with
Contact Sensor
Battery level changed
Contact Sensor
Battery is low
i
Triggers when battery drops below threshold
Contact Sensor
Left open for duration
i
Triggers when the sensor has been open for the specified duration
Contact Sensor
Contact changed
Contact Sensor
Tamper alarm
Contact Sensor
Luminance changed
i
Triggers when lux changes (DP101 / illuminance on hybrid contacts)
Contact Sensor Zigbee
열림 감지 열리면
Contact Sensor Zigbee
열림 감지 닫히면
Contact Sensor Zigbee
배터리 수준이 변경되면
Contact Sensor Zigbee
변화가 감지되면
Contact Sensor Zigbee
변화 감지가 정상 상태이면
Contact Sensor Zigbee
조도가 변경되면
Contact Sensor Zigbee
Door/window opened
i
Triggers when the magnet separates from the sensor
Contact Sensor Zigbee
Door/window closed
i
Triggers when the magnet contacts the sensor
Contact Sensor Zigbee
Tamper alert
i
Triggers when the sensor has been tampered with
Contact Sensor Zigbee
Battery level changed
Contact Sensor Zigbee
Battery is low
i
Triggers when battery drops below threshold
Contact Sensor Zigbee
Left open for duration
i
Triggers when the sensor has been open for the specified duration
Contact Sensor Zigbee
Contact changed
Contact Sensor Zigbee
Tamper alarm
Contact Sensor Zigbee
Illuminance changed
Cover Controller
창문 가림 상태가 변경되면 ...
Cover Controller
창문 가림 %가 변경되면
Cover Controller
창문 가림 기울기 위치가 변경되면
Cover Controller
조도가 변경되면
Cover Controller
배터리 수준이 변경되면
Cover Controller
밝기가 변경되면
Cover Controller
Button pressed
Cover Controller
Position changed
Cover Controller
Brightness changed
Cover Controller
Battery low
Cover Controller
Physically opened
Cover Controller
Physically closed
Cover Controller
Physically pressed
Cover Controller
Luminance changed
Illuminance Sensor
조도가 변경되면
Illuminance Sensor
배터리 수준이 변경되면
Illuminance Sensor
Luminance changed
Illuminance Sensor
Battery low
Motion Sensor
움직임이 감지되면
Motion Sensor
움직임이 없으면
Motion Sensor
조도가 변경되면
Motion Sensor
온도가 변경되면
Motion Sensor
습도가 변경되면
Motion Sensor
변화가 감지되면
Motion Sensor
변화 감지가 정상 상태이면
Motion Sensor
Motion detected
Motion Sensor
Motion cleared
Motion Sensor
Battery low
Motion Sensor
Battery level changed
Motion Sensor
Tamper alarm triggered
Motion Sensor
Tamper alarm cleared
Motion Sensor
Luminance changed
i
This card triggers when the luminance sensor reports a new value, independent of motion detection
Motion Sensor
Tamper alarm
Motion Sensor
Temperature changed
Motion Sensor
Humidity changed
Plug Energy Monitor
소비 전력이 변경되면
Plug Energy Monitor
전력량이 변경되면
Plug Energy Monitor
전압이 변경되면
Plug Energy Monitor
전류가 변경되면
Plug Energy Monitor
켜지면
Plug Energy Monitor
꺼지면
Plug Energy Monitor
Turned on
Plug Energy Monitor
Turned off
Plug Energy Monitor
Power changed
Plug Energy Monitor
Voltage changed
Plug Energy Monitor
Current changed
Plug Energy Monitor
Energy consumption changed
Plug Energy Monitor
Power changed
Plug Energy Monitor
Battery low
Plug Energy Monitor
Physical button on
Plug Energy Monitor
Physical button off
Presence Sensor (Radar / mmWave)
움직임이 감지되면
Presence Sensor (Radar / mmWave)
움직임이 없으면
Presence Sensor (Radar / mmWave)
조도가 변경되면
Presence Sensor (Radar / mmWave)
Presence detected
i
Triggers when the mmWave radar detects human presence (even stationary)
Presence Sensor (Radar / mmWave)
Presence cleared
i
Triggers when no human presence is detected for the configured timeout
Presence Sensor (Radar / mmWave)
Motion detected
i
Triggers when active motion is detected (walking, moving)
Presence Sensor (Radar / mmWave)
Motion cleared
i
Triggers when active motion stops (presence may still be detected)
Presence Sensor (Radar / mmWave)
Illuminance changed
Presence Sensor (Radar / mmWave)
Detection distance changed
Presence Sensor (Radar / mmWave)
Zone 1 presence detected
i
Triggers when presence is detected in Zone 1 (near field)
Presence Sensor (Radar / mmWave)
Zone 2 presence detected
i
Triggers when presence is detected in Zone 2 (mid field)
Presence Sensor (Radar / mmWave)
Zone 3 presence detected
i
Triggers when presence is detected in Zone 3 (far field)
Presence Sensor (Radar / mmWave)
Movement classification changed
i
Triggers when the type of detected movement changes (none/stationary/micro/small/large)
Presence Sensor (Radar / mmWave)
Temperature changed
Presence Sensor (Radar / mmWave)
Humidity changed
Remote Button Wireless Wall
배터리 수준이 변경되면
Remote Button Wireless Wall
Button pressed ([[button]])
Remote Button Wireless Wall
Button double-pressed ([[button]])
Remote Button Wireless Wall
Button long-pressed ([[button]])
Remote Button Wireless Wall
Button multi-pressed ([[button]]) ([[count]])
Remote Button Wireless Wall
Button 1 pressed
Remote Button Wireless Wall
Button 1 double-pressed
Remote Button Wireless Wall
Button 1 long-pressed
Remote Button Wireless Wall
Button 1 triple-pressed
Remote Button Wireless Wall
Button 1 released - after hold
Remote Button Wireless Wall
Scene recalled ([[scene_id]])
Remote Button Wireless Wall
Battery low
Remote Button Wireless Wall
The battery level changed
i
Fires when measure_battery updates (passive ZCL). Token = new %.
Scene Switch 4-Gang
배터리 수준이 변경되면
Scene Switch 4-Gang
Button multi-pressed Button
Scene Switch 4-Gang
Button long-pressed Button
Scene Switch 4-Gang
Button double-pressed Button
Scene Switch 4-Gang
Button pressed Button
Scene Switch 4-Gang
Button pressed Button
Scene Switch 4-Gang
Button double-pressed Button
Scene Switch 4-Gang
Button long-pressed Button
Scene Switch 4-Gang
Button 1 pressed
Scene Switch 4-Gang
Button 1 double-pressed
Scene Switch 4-Gang
Button 1 long-pressed
Scene Switch 4-Gang
Button 2 pressed
Scene Switch 4-Gang
Button 2 double-pressed
Scene Switch 4-Gang
Button 2 long-pressed
Scene Switch 4-Gang
Button 3 pressed
Scene Switch 4-Gang
Button 3 double-pressed
Scene Switch 4-Gang
Button 3 long-pressed
Scene Switch 4-Gang
Button 4 pressed
Scene Switch 4-Gang
Button 4 double-pressed
Scene Switch 4-Gang
Button 4 long-pressed
Scene Switch 4-Gang
Battery level changed
Scene Switch 4-Gang
Battery low
Scene Switch 4-Gang
Button 1 triple-pressed
Scene Switch 4-Gang
Button 1 triple-pressed
Scene Switch 4-Gang
Button 1 released
Scene Switch 4-Gang
Button 1 released
Scene Switch 4-Gang
Button 1 pressed
Scene Switch 4-Gang
Button 1 double-pressed
Scene Switch 4-Gang
Button 1 long-pressed
Scene Switch 4-Gang
Button 2 triple-pressed
Scene Switch 4-Gang
Button 2 triple-pressed
Scene Switch 4-Gang
Button 2 released
Scene Switch 4-Gang
Button 2 released
Scene Switch 4-Gang
Button 2 pressed
Scene Switch 4-Gang
Button 2 double-pressed
Scene Switch 4-Gang
Button 2 long-pressed
Scene Switch 4-Gang
Button 3 triple-pressed
Scene Switch 4-Gang
Button 3 triple-pressed
Scene Switch 4-Gang
Button 3 released
Scene Switch 4-Gang
Button 3 released
Scene Switch 4-Gang
Button 3 pressed
Scene Switch 4-Gang
Button 3 double-pressed
Scene Switch 4-Gang
Button 3 long-pressed
Scene Switch 4-Gang
Button 4 triple-pressed
Scene Switch 4-Gang
Button 4 triple-pressed
Scene Switch 4-Gang
Button 4 released
Scene Switch 4-Gang
Button 4 released
Scene Switch 4-Gang
Button 4 pressed
Scene Switch 4-Gang
Button 4 double-pressed
Scene Switch 4-Gang
Button 4 long-pressed
Scene Switch 4-Gang
Physical button on
Scene Switch 4-Gang
Physical button off
Smart Knob
밝기가 변경되면
Smart Knob
배터리 수준이 변경되면
Smart Knob
Knob rotated
Smart Knob
Button pressed
Smart Knob
Button double-pressed
Smart Knob
Button long-pressed
Smart Knob
Button multi-pressed
Smart Knob
Button 1 pressed
Smart Knob
Button 1 double-pressed
Smart Knob
Button 1 long-pressed
Smart Knob
Button 1 triple-pressed
Smart Knob
Button 1 released - after hold
Smart Knob
Battery low
Smart Knob
Button 1 scene [[scene_id]] recalled ({scene_id})
i
When button 1 recalls a Zigbee scene (cluster 0x05 — scene mode, P31)
Smart Knob
Rotated left
Smart Knob
Rotated right
Smart Knob
Pressed and rotated left
Smart Knob
Pressed and rotated right
Smart Knob
Brightness changed
Smart Knob
Scene recalled
Smart Knob / Scene Switch
밝기가 변경되면
Smart Knob / Scene Switch
배터리 수준이 변경되면
Smart Knob / Scene Switch
Rotated left
i
When the knob is rotated counter-clockwise
Smart Knob / Scene Switch
Rotated right
i
When the knob is rotated clockwise
Smart Knob / Scene Switch
Button pressed
i
When the knob button is pressed (single, double, or hold)
Smart Knob / Scene Switch
Single press
Smart Knob / Scene Switch
Double press
Smart Knob / Scene Switch
Long press
Smart Knob / Scene Switch
Battery low
Smart Knob / Scene Switch
Pressed and rotated left
i
When the knob is pressed while being rotated counter-clockwise (P29 — matches pobao TZ-X1 Smart Scene Button spec)
Smart Knob / Scene Switch
Pressed and rotated right
i
When the knob is pressed while being rotated clockwise (P29 — matches pobao TZ-X1 Smart Scene Button spec)
Smart Knob / Scene Switch
Scene recalled
i
When the device recalls a Zigbee scene (cluster 0x05 — scene mode)
Smart Knob / Scene Switch
Brightness changed
i
When simulated rotation brightness changes
Smart Knob / Scene Switch
Physical button on
Smart Knob / Scene Switch
Physical button off
Smart Plug without metering
켜지면
Smart Plug without metering
꺼지면
Smart Plug without metering
Turned on
Smart Plug without metering
Turned off
Soil Moisture Sensor
온도가 변경되면
Soil Moisture Sensor
습도가 변경되면
Soil Moisture Sensor
조도가 변경되면
Soil Moisture Sensor
배터리 수준이 변경되면
Soil Moisture Sensor
누수가 감지되면
Soil Moisture Sensor
누수가 감지되지 않으면
Soil Moisture Sensor
Soil moisture changed
Soil Moisture Sensor
Soil temperature changed
Soil Moisture Sensor
Soil is dry - needs water
i
Triggers when soil moisture drops below the configured dry threshold
Soil Moisture Sensor
Soil is wet
i
Triggers when soil moisture rises above the configured wet threshold
Soil Moisture Sensor
Soil moisture is optimal
i
Triggers when soil moisture is in the optimal range for plant growth
Soil Moisture Sensor
Frost warning
i
Triggers when soil temperature drops below 2°C - protect your plants!
Soil Moisture Sensor
Battery level changed
Soil Moisture Sensor
Battery is low
Soil Moisture Sensor
Temperature changed
Soil Moisture Sensor
Humidity changed
Soil Moisture Sensor
Water alarm
Soil Moisture Sensor
Fertilizer / EC level changed
i
Triggers when the soil EC (Electrical Conductivity / Fertilizer) level changes
Soil Moisture Sensor
Fertilizer / EC level is high
i
Triggers when the soil EC level exceeds the threshold
Soil Moisture Sensor
Illuminance changed
Wall Dimmer
켜지면
Wall Dimmer
꺼지면
Wall Dimmer
밝기가 변경되면
Wall Dimmer
Turned on
Wall Dimmer
Turned off
Wall Dimmer
Brightness changed
Wall Dimmer
Physical button on
Wall Dimmer
Physical button off
Wall Switch 3-Gang 1-Way (BSEED)
켜지면
Wall Switch 3-Gang 1-Way (BSEED)
꺼지면
Wall Switch 3-Gang 1-Way (BSEED)
Turned on
Wall Switch 3-Gang 1-Way (BSEED)
Turned off
Wall Switch 3-Gang 1-Way (BSEED)
Gang 1 physical ON
Wall Switch 3-Gang 1-Way (BSEED)
Gang 1 physical OFF
Wall Switch 3-Gang 1-Way (BSEED)
Gang 2 physical ON
Wall Switch 3-Gang 1-Way (BSEED)
Gang 2 physical OFF
Wall Switch 3-Gang 1-Way (BSEED)
Gang 3 physical ON
Wall Switch 3-Gang 1-Way (BSEED)
Gang 3 physical OFF
Wall Switch 3-Gang 1-Way (BSEED)
Gang 1 scene triggered
Wall Switch 3-Gang 1-Way (BSEED)
Gang 2 scene triggered
Wall Switch 3-Gang 1-Way (BSEED)
Gang 3 scene triggered
Wall Switch 4-Gang 1-Way (BSEED)
켜지면
Wall Switch 4-Gang 1-Way (BSEED)
꺼지면
Wall Switch 4-Gang 1-Way (BSEED)
Turned on
Wall Switch 4-Gang 1-Way (BSEED)
Turned off
Wall Switch 4-Gang 1-Way (BSEED)
Gang 1 physical ON
Wall Switch 4-Gang 1-Way (BSEED)
Gang 1 physical OFF
Wall Switch 4-Gang 1-Way (BSEED)
Gang 2 physical ON
Wall Switch 4-Gang 1-Way (BSEED)
Gang 2 physical OFF
Wall Switch 4-Gang 1-Way (BSEED)
Gang 3 physical ON
Wall Switch 4-Gang 1-Way (BSEED)
Gang 3 physical OFF
Wall Switch 4-Gang 1-Way (BSEED)
Gang 4 physical ON
Wall Switch 4-Gang 1-Way (BSEED)
Gang 4 physical OFF
Wall Switch 4-Gang 1-Way (BSEED)
Gang 1 scene triggered
Wall Switch 4-Gang 1-Way (BSEED)
Gang 2 scene triggered
Wall Switch 4-Gang 1-Way (BSEED)
Gang 3 scene triggered
Wall Switch 4-Gang 1-Way (BSEED)
Gang 4 scene triggered
Wall Switch 4-Gang 1-Way (BSEED)
Physical button ON
Wall Switch 4-Gang 1-Way (BSEED)
Physical button OFF
Water Leak Sensor
누수가 감지되면
Water Leak Sensor
누수가 감지되지 않으면
Water Leak Sensor
배터리 수준이 변경되면
Water Leak Sensor
변화가 감지되면
Water Leak Sensor
변화 감지가 정상 상태이면
Water Leak Sensor
Water leak detected
i
Triggers when the sensor detects water
Water Leak Sensor
Water leak cleared
i
Triggers when the sensor no longer detects water
Water Leak Sensor
Battery is low
i
Triggers when the battery level drops below threshold
Water Leak Sensor
Tamper alert
i
Triggers when the sensor detects tampering (case opened)
Water Leak Sensor
Water alarm
Water Leak Sensor
Tamper alarm
Wireless Button 1 (TS0041)
배터리 수준이 변경되면
Wireless Button 1 (TS0041)
Button pressed
Wireless Button 1 (TS0041)
Button double-pressed
Wireless Button 1 (TS0041)
Button long-pressed
Wireless Button 1 (TS0041)
Button multi-pressed
Wireless Button 1 (TS0041)
Button 1 pressed
Wireless Button 1 (TS0041)
Button 1 double-pressed
Wireless Button 1 (TS0041)
Button 1 long-pressed
Wireless Button 1 (TS0041)
Button 1 triple-pressed
Wireless Button 1 (TS0041)
Button 1 released - after hold
Wireless Button 1 (TS0041)
Battery low
Wireless Button 1 (TS0041)
The battery level changed
i
Fires when measure_battery updates (passive ZCL). Token = new %.
Wireless Button 1 (TS0041)
Button 1 scene [[scene_id]] recalled ({scene_id})
i
When button 1 recalls a Zigbee scene (cluster 0x05 — scene mode, P31)
Wireless Button 3 (TS0043)
배터리 수준이 변경되면
Wireless Button 3 (TS0043)
Button pressed Button
Wireless Button 3 (TS0043)
Button double-pressed Button
Wireless Button 3 (TS0043)
Button long-pressed Button
Wireless Button 3 (TS0043)
Button multi-pressed Button
Wireless Button 3 (TS0043)
Button 1 pressed
Wireless Button 3 (TS0043)
Button 2 pressed
Wireless Button 3 (TS0043)
Button 3 pressed
Wireless Button 3 (TS0043)
Button 1 double-pressed
Wireless Button 3 (TS0043)
Button 2 double-pressed
Wireless Button 3 (TS0043)
Button 3 double-pressed
Wireless Button 3 (TS0043)
Button 1 long-pressed
Wireless Button 3 (TS0043)
Button 2 long-pressed
Wireless Button 3 (TS0043)
Button 3 long-pressed
Wireless Button 3 (TS0043)
Button 1 triple-pressed
Wireless Button 3 (TS0043)
Button 2 triple-pressed
Wireless Button 3 (TS0043)
Button 3 triple-pressed
Wireless Button 3 (TS0043)
Button 1 released - after hold
Wireless Button 3 (TS0043)
Button 2 released - after hold
Wireless Button 3 (TS0043)
Button 3 released - after hold
Wireless Button 3 (TS0043)
Battery low
Wireless Button 3 (TS0043)
The battery level changed
i
Fires when measure_battery updates (passive ZCL). Token = new %.
Wireless Button 3 (TS0043)
Button 3 scene [[scene_id]] recalled ({scene_id})
i
When button 3 recalls a Zigbee scene (cluster 0x05 — scene mode, P31)
Zigbee Bastien
App is started App ID (leave empty for any)
i
Triggers when a Homey app is started. Inspired by Device Capabilities app.
Zigbee Bastien
Battery health changed ... Health Status
i
Triggers when the battery health score changes to a new status level
Zigbee Bastien
Battery needs replacement ...
i
Triggers when battery health drops to replacement level or a replacement is detected
Zigbee Bastien
Button pressed ...
Zigbee Bastien
Any capability value changed Device
i
Triggers when any capability on any device changes. Inspired by Device Capabilities (silent enrich).
Zigbee Bastien
A device interaction happened Device (optional filter)
i
Fires on action-like capability changes (onoff, dim, button, cover, thermostat…). Optional device filter (P2687).
Zigbee Bastien
Timer of ... started or ended
i
Fires when a countdown set by this app starts or ends. Idea credited to iBush's Switcher app (community.homey.app/t/160624).
Zigbee Bastien
Home mode changed Mode
i
Triggers when the home mode changes (day/evening/night/away)
Zigbee Bastien
Lamp Mesh Occupancy changed
i
Fires when soft mesh occupancy estimate flips occupied/clear for a zone
Zigbee Bastien
Scheduled action executed
i
Triggers when a scheduled action fires
Zigbee Bastien
Schedule activated/deactivated
i
Triggers when a schedule is enabled or disabled
Zigbee Bastien
Sub-capability changed ... Capability (empty=any)
i
Triggers when any sub-capability changes (e.g. onoff.gang2, dim.1)
Zigbee Bastien
Tariff period changed
i
Triggers when the active tariff period changes (e.g., from off-peak to peak)
Zigbee Bastien
Smart · value quality changed (live / ≈ / ƒ / →) ...
i
Fires when a capability switches between live measurement, intelligent estimate, calculation or local prediction
Zigbee Bastien
Tuya bitmap DP changed ... DP Number (0=any)
i
Triggers when a bitmap (type 5) DP changes. Bitmap is a bitmask of active flags.
Zigbee Bastien
Zigbee cluster event received ...
i
Triggers when a manufacturer cluster frame is received (0xE000-0xFFFF).
Zigbee Bastien
Any Tuya DP changed ...
i
Triggers when ANY DP value changes. Includes DP type info (raw/bool/value/string/enum/bitmap).
Zigbee Bastien
Tuya Data Point received ... DP Number (0=any)
i
Triggers when a raw Tuya DP is received. Use DP 0 to match any DP.
Zigbee Bastien
DP threshold crossed ... DP Number Threshold Value
i
Triggers when a numeric DP value crosses a threshold (forum #1016)
Zigbee Bastien
Tuya raw DP received ... DP Number (0=any)
i
Triggers when a raw (type 0) DP is received. Data is provided as hex string.

그리고...

1-Gang Smart Switch
켜지면
1-Gang Smart Switch
Is on
2-Gang Smart Switch
켜지면
2-Gang Smart Switch
Gang 1 is on
2-Gang Smart Switch
Gang 2 is on
3-Gang Smart Switch
켜지면
3-Gang Smart Switch
Gang 1 is on
3-Gang Smart Switch
Gang 2 is on
3-Gang Smart Switch
Gang 3 is on
4-Gang Smart Switch
켜지면
4-Gang Smart Switch
Gang 1 is on
4-Gang Smart Switch
Gang 2 is on
4-Gang Smart Switch
Gang 3 is on
4-Gang Smart Switch
Gang 4 is on
Climate Sensor
Temperature is above Temperature
Climate Sensor
Temperature is below Temperature
Climate Sensor
Humidity is above Humidity (%)
Climate Sensor
Humidity is below Humidity (%)
Climate Sensor
Battery voltage is below Threshold (V)V
i
Triggers when the battery voltage drops below the threshold (V). Default 2.5V for most sensors.
Contact Sensor
열림 감지 열리면
Contact Sensor
변화가 감지되면
Contact Sensor
Door/window is open
Contact Sensor
Battery is above 20
Contact Sensor
Contact is open
Contact Sensor
Tamper is active
Contact Sensor Zigbee
열림 감지 열리면
Contact Sensor Zigbee
변화가 감지되면
Contact Sensor Zigbee
Door/window is open
Contact Sensor Zigbee
Battery is above 20
Contact Sensor Zigbee
Contact is open
Contact Sensor Zigbee
Tamper is active
Cover Controller
창문 가림 상태가 다음이면 ...
Illuminance Sensor
Luminance is above 200
Motion Sensor
움직임이 감지되면
Motion Sensor
변화가 감지되면
Motion Sensor
Motion is detected
Motion Sensor
Tamper is active
Plug Energy Monitor
켜지면
Plug Energy Monitor
Plug is on
Plug Energy Monitor
Power is above 100
Plug Energy Monitor
Energy is above 10
Presence Sensor (Radar / mmWave)
움직임이 감지되면
Presence Sensor (Radar / mmWave)
Someone is present
Presence Sensor (Radar / mmWave)
Illuminance is above 100
Presence Sensor (Radar / mmWave)
Target is within distance 300
Presence Sensor (Radar / mmWave)
Motion is detected
Presence Sensor (Radar / mmWave)
Zone 1 presence is detected Zone
i
Check if a specific detection zone has active presence
Presence Sensor (Radar / mmWave)
Movement type is Classification
i
Check the current movement classification (none, stationary, micro_motion, small_motion, large_motion)
Smart Knob
Brightness level is above Level
Smart Knob / Scene Switch
Brightness level is above Level
Smart Plug without metering
켜지면
Smart Plug without metering
Is turned on
Soil Moisture Sensor
누수가 감지되면
Soil Moisture Sensor
Soil moisture is below 30
Soil Moisture Sensor
Soil moisture is above 40
Soil Moisture Sensor
Soil temperature is above 5
Soil Moisture Sensor
Soil needs water
Soil Moisture Sensor
Battery is above 20
Soil Moisture Sensor
Water is detected
Soil Moisture Sensor
Fertilizer / EC level is above 1500
Wall Dimmer
켜지면
Wall Dimmer
Is turned on
Wall Switch 3-Gang 1-Way (BSEED)
켜지면
Wall Switch 3-Gang 1-Way (BSEED)
Is on
Wall Switch 4-Gang 1-Way (BSEED)
켜지면
Wall Switch 4-Gang 1-Way (BSEED)
Is on
Water Leak Sensor
누수가 감지되면
Water Leak Sensor
변화가 감지되면
Water Leak Sensor
Water is detected
Water Leak Sensor
Battery is above 20
Water Leak Sensor
Tamper is active
Zigbee Bastien
Battery health is below Threshold (0-100) (...)
i
Check if the battery health score is below a given threshold
Zigbee Bastien
Lamp Mesh zone is occupied Zone id
Zigbee Bastien
Night Path bias is active
i
True when House Mode is night or sun is below horizon
Zigbee Bastien
Quiet Hours are active Start (HH:MM) End (HH:MM)
Zigbee Bastien
Soft Feature catalog has at least N vectors Minimum count
Zigbee Bastien
Soft Feature is enabled Feature id
i
True when the Soft Feature id was enabled via SoftRecipeRunner
Zigbee Bastien
Sub-capability Capability is on (...)
i
Check if a sub-capability is on (e.g. onoff.gang2)
Zigbee Bastien
Battery is low (app) (...)
i
Checks app-owned tuya_battery_low (derived from measure_battery). Never uses Homey alarm_battery.
Zigbee Bastien
Tuya DP DP Number equals Value (...)
i
Check if a raw Tuya datapoint has a specific value
Zigbee Bastien
DP type is... DP Number Expected Type (...)
Zigbee Bastien
Any room is occupied
i
Check if any Virtual Presence Detector in the app considers its room occupied

그러면...

1-Gang Smart Switch
켜기
1-Gang Smart Switch
끄기
1-Gang Smart Switch
켬/끔 상태 전환하기
1-Gang Smart Switch
Set Power On Behavior Behavior
1-Gang Smart Switch
Set Software Child Lock Locked
1-Gang Smart Switch
Turn on
1-Gang Smart Switch
Turn off
1-Gang Smart Switch
Toggle
1-Gang Smart Switch
Set backlight mode Backlight mode
1-Gang Smart Switch
Set backlight color Backlight color
1-Gang Smart Switch
Set backlight brightness Brightness
1-Gang Smart Switch
Set countdown timer Countdown (seconds)
1-Gang Smart Switch
Set child lock Enabled
1-Gang Smart Switch
Set scene mode Scene mode
1-Gang Smart Switch
Set power-on behavior Behavior
1-Gang Smart Switch
Set switch type to Type
1-Gang Smart Switch
Clear countdown timer
2-Gang Smart Switch
켜기
2-Gang Smart Switch
끄기
2-Gang Smart Switch
켬/끔 상태 전환하기
2-Gang Smart Switch
Set Power On Behavior Behavior
2-Gang Smart Switch
Set Software Child Lock Locked
2-Gang Smart Switch
Turn on gang 1
2-Gang Smart Switch
Turn off gang 1
2-Gang Smart Switch
Turn on gang 2
2-Gang Smart Switch
Turn off gang 2
2-Gang Smart Switch
Toggle gang 1
2-Gang Smart Switch
Toggle gang 2
3-Gang Smart Switch
켜기
3-Gang Smart Switch
끄기
3-Gang Smart Switch
켬/끔 상태 전환하기
3-Gang Smart Switch
Set Power On Behavior Behavior
3-Gang Smart Switch
Set Software Child Lock Locked
3-Gang Smart Switch
Turn on gang 1
3-Gang Smart Switch
Turn off gang 1
3-Gang Smart Switch
Turn on gang 2
3-Gang Smart Switch
Turn off gang 2
3-Gang Smart Switch
Turn on gang 3
3-Gang Smart Switch
Turn off gang 3
3-Gang Smart Switch
Toggle gang 1
3-Gang Smart Switch
Toggle gang 2
3-Gang Smart Switch
Toggle gang 3
3-Gang Smart Switch
Set backlight mode Mode
3-Gang Smart Switch
Set scene mode Mode
3-Gang Smart Switch
Set power-on behavior Mode
4-Gang Smart Switch
켜기
4-Gang Smart Switch
끄기
4-Gang Smart Switch
켬/끔 상태 전환하기
4-Gang Smart Switch
Set Power On Behavior Behavior
4-Gang Smart Switch
Set Software Child Lock Locked
4-Gang Smart Switch
Turn on gang 1
4-Gang Smart Switch
Turn off gang 1
4-Gang Smart Switch
Turn on gang 2
4-Gang Smart Switch
Turn off gang 2
4-Gang Smart Switch
Turn on gang 3
4-Gang Smart Switch
Turn off gang 3
4-Gang Smart Switch
Turn on gang 4
4-Gang Smart Switch
Turn off gang 4
4-Gang Smart Switch
Toggle gang 1
4-Gang Smart Switch
Toggle gang 2
4-Gang Smart Switch
Toggle gang 3
4-Gang Smart Switch
Toggle gang 4
Cover Controller
창문 가림 상태 설정 ...
Cover Controller
창문 가림 %를 다음으로 설정 %
i
위치를 열림(100%), 닫힘(0%) 또는 그 사이의 값으로 변경해요.
Cover Controller
창문 가림 기울기 위치를 다음으로 설정 %
i
창문 가림 기울기 위치를 열림(100%), 닫힘(0%) 또는 그 사이의 값으로 변경해요.
Cover Controller
버튼 누르기
Cover Controller
다음 밝기로 조절 %
Cover Controller
상대 밝기 설정 %
i
제품의 현재 디밍 수준에 따라 어둡게 또는 밝게 설정돼요.
Cover Controller
Set position to... Position
Cover Controller
Open
Cover Controller
Close
Cover Controller
Set brightness to... Brightness
Cover Controller
Go to favorite position
i
Move to the saved favorite position (if supported)
Cover Controller
Set brightness Brightness
Cover Controller
Set position Position
Cover Controller
Open
Cover Controller
Close
Cover Controller
Stop
Cover Controller
Set current position as upper limit
Cover Controller
Set current position as lower limit
Cover Controller
Remove position limits
Plug Energy Monitor
켜기
Plug Energy Monitor
끄기
Plug Energy Monitor
켬/끔 상태 전환하기
Plug Energy Monitor
Turn on
Plug Energy Monitor
Turn off
Plug Energy Monitor
Toggle
Plug Energy Monitor
Reset energy meter
i
Resets the energy consumption counter to 0 kWh
Presence Sensor (Radar / mmWave)
Clear presence (maintenance)
i
Force Homey presence OFF when the radar is stuck Occupied (ghost presence / MCU). Does not require unplugging.
Smart Knob
버튼 누르기
Smart Knob
다음 밝기로 조절 %
Smart Knob
상대 밝기 설정 %
i
제품의 현재 디밍 수준에 따라 어둡게 또는 밝게 설정돼요.
Smart Knob
Set brightness Brightness
Smart Knob / Scene Switch
다음 밝기로 조절 %
Smart Knob / Scene Switch
상대 밝기 설정 %
i
제품의 현재 디밍 수준에 따라 어둡게 또는 밝게 설정돼요.
Smart Knob / Scene Switch
Set brightness Brightness
Smart Plug without metering
켜기
Smart Plug without metering
끄기
Smart Plug without metering
켬/끔 상태 전환하기
Smart Plug without metering
Set Software Child Lock Locked
Smart Plug without metering
Turn on
Smart Plug without metering
Turn off
Smart Plug without metering
Toggle
Wall Dimmer
켜기
Wall Dimmer
끄기
Wall Dimmer
켬/끔 상태 전환하기
Wall Dimmer
다음 밝기로 조절 %
Wall Dimmer
상대 밝기 설정 %
i
제품의 현재 디밍 수준에 따라 어둡게 또는 밝게 설정돼요.
Wall Dimmer
Turn on
Wall Dimmer
Turn off
Wall Dimmer
Toggle
Wall Dimmer
Set brightness Brightness
Wall Switch 3-Gang 1-Way (BSEED)
켜기
Wall Switch 3-Gang 1-Way (BSEED)
끄기
Wall Switch 3-Gang 1-Way (BSEED)
켬/끔 상태 전환하기
Wall Switch 3-Gang 1-Way (BSEED)
Set LED indicator mode Mode
Wall Switch 3-Gang 1-Way (BSEED)
Set power-on behavior Mode
Wall Switch 3-Gang 1-Way (BSEED)
Set external switch type Mode
Wall Switch 3-Gang 1-Way (BSEED)
Set scene mode Mode
Wall Switch 3-Gang 1-Way (BSEED)
Turn on
Wall Switch 3-Gang 1-Way (BSEED)
Turn off
Wall Switch 3-Gang 1-Way (BSEED)
Toggle
Wall Switch 3-Gang 1-Way (BSEED)
Turn on gang 1
Wall Switch 3-Gang 1-Way (BSEED)
Turn off gang 1
Wall Switch 3-Gang 1-Way (BSEED)
Toggle gang 1
Wall Switch 3-Gang 1-Way (BSEED)
Turn on gang 2
Wall Switch 3-Gang 1-Way (BSEED)
Turn off gang 2
Wall Switch 3-Gang 1-Way (BSEED)
Toggle gang 2
Wall Switch 3-Gang 1-Way (BSEED)
Turn on gang 3
Wall Switch 3-Gang 1-Way (BSEED)
Turn off gang 3
Wall Switch 3-Gang 1-Way (BSEED)
Toggle gang 3
Wall Switch 3-Gang 1-Way (BSEED)
Turn on all gangs
Wall Switch 3-Gang 1-Way (BSEED)
Turn off all gangs
Wall Switch 4-Gang 1-Way (BSEED)
켜기
Wall Switch 4-Gang 1-Way (BSEED)
끄기
Wall Switch 4-Gang 1-Way (BSEED)
켬/끔 상태 전환하기
Wall Switch 4-Gang 1-Way (BSEED)
Set LED indicator mode Mode
Wall Switch 4-Gang 1-Way (BSEED)
Set power-on behavior Mode
Wall Switch 4-Gang 1-Way (BSEED)
Set external switch type Mode
Wall Switch 4-Gang 1-Way (BSEED)
Set scene mode Mode
Wall Switch 4-Gang 1-Way (BSEED)
Turn on
Wall Switch 4-Gang 1-Way (BSEED)
Turn off
Wall Switch 4-Gang 1-Way (BSEED)
Toggle
Wall Switch 4-Gang 1-Way (BSEED)
Turn on gang 1
Wall Switch 4-Gang 1-Way (BSEED)
Turn off gang 1
Wall Switch 4-Gang 1-Way (BSEED)
Toggle gang 1
Wall Switch 4-Gang 1-Way (BSEED)
Turn on gang 2
Wall Switch 4-Gang 1-Way (BSEED)
Turn off gang 2
Wall Switch 4-Gang 1-Way (BSEED)
Toggle gang 2
Wall Switch 4-Gang 1-Way (BSEED)
Turn on gang 3
Wall Switch 4-Gang 1-Way (BSEED)
Turn off gang 3
Wall Switch 4-Gang 1-Way (BSEED)
Toggle gang 3
Wall Switch 4-Gang 1-Way (BSEED)
Turn on gang 4
Wall Switch 4-Gang 1-Way (BSEED)
Turn off gang 4
Wall Switch 4-Gang 1-Way (BSEED)
Toggle gang 4
Wall Switch 4-Gang 1-Way (BSEED)
Turn on all gangs
Wall Switch 4-Gang 1-Way (BSEED)
Turn off all gangs
Zigbee Bastien
Absence Energy Soft — eco when zone clears Zone id Action (Device A, Device B (optional))
i
When Lamp Mesh zone clears, dim or off enrolled devices (presence energy-save)
Zigbee Bastien
Calibrate battery reading Reference Voltage (V) Reference Percentage (%) (...)
i
Set a calibration reference point using a known accurate voltage and percentage
Zigbee Bastien
Contact Entry Soft — door opens lights Quiet start (optional) Quiet end (optional) (Contact / door, Light A, Light B (optional))
Zigbee Bastien
Cover limit calibration Command on Cover
i
Set or clear the upper/lower travel limits of a Tuya curtain motor (Quoya/Dooya). Move the cover to the desired position first, then run the matching action.
Zigbee Bastien
Move Cover to Position (%)%
i
Moves a cover/blind to a precise position (0% = closed, 100% = fully open)
Zigbee Bastien
Fade Light to Target brightness (%)% over Duration (min) min
i
Gradually fades the light from its current brightness to the target over the chosen duration
Zigbee Bastien
All Lights Off
i
Turns off every light-capable device paired in this app
Zigbee Bastien
Solar Sync on Light
i
Sets brightness and white temperature from real sun position (and Room Balance lux when available)
Zigbee Bastien
Path Light: Motion sensor → Light at Brightness (%)% for Timeout (min) min (lux < Skip if lux ≥, quiet Quiet start (HH:MM)-Quiet end (HH:MM))
i
Turns a light on from motion, with optional lux gate and quiet hours; applies Daylight Atmosphere white
Zigbee Bastien
Sleep: dim Light to off over Duration (min) min
i
Gradually dims the light to 1% over the chosen duration, then turns it off
Zigbee Bastien
Wake-up: ramp Light to Target brightness (%)% over Duration (min) min
i
Gradually raises the light brightness from 1% to the target over the chosen duration, then holds
Zigbee Bastien
Idle Auto-Off Soft Idle minutes (Light)
i
Turns light off after idle minutes without change
Zigbee Bastien
Auto-enroll mains lights in Lamp Mesh zone Zone id Max lights
i
Scans Homey for mains lights and enrolls up to N into a mesh occupancy zone
Zigbee Bastien
Enroll lights in Lamp Mesh Occupancy zone Zone id (Light A (mains), Light B (mains), Light C (optional))
i
Soft RF/link-quality fusion across lights (+ optional PIR). Homey alternative to proprietary lamp-as-sensor hubs — not vendor-parity.
Zigbee Bastien
Add PIR/occupancy sensor to Lamp Mesh zone Zone id (Motion / presence sensor)
Zigbee Bastien
Enroll Lux Adaptive Dim (Light, Lux sensor (optional))
i
Soft-dim light from room lux (illuminance-aware lighting)
Zigbee Bastien
Mirror Light Sync — master to followers (Master light, Follower A, Follower B (optional))
Zigbee Bastien
Check Device OTA Firmware Updates (...)
i
Queries Zigbee2MQTT index for updates. You will be notified.
Zigbee Bastien
Run OTA discovery scan
i
Checks all Zigbee devices against the public zigbee-OTA firmware index and notifies for available updates
Zigbee Bastien
Peak Load Soft Shed — dim on high power Threshold (W) (Power meter, Light A, Light B (optional))
Zigbee Bastien
Apply scene slot Slot (1-5) to Light
i
Re-applies a scene previously captured with 'Capture scene'
Zigbee Bastien
Capture Light state into scene slot Slot (1-5)
i
Stores the light's current state (on/off, brightness, color temperature) in a slot to re-apply later with 'Apply scene'
Zigbee Bastien
Cycle Light to next scene (Number of slots (1-5) slots)
i
Applies the next captured scene slot (1→2→3→1…)
Zigbee Bastien
Shade Daylight Soft — solar open/close (Cover / shade)
i
Closes cover at dusk and opens at dawn from solar elevation
Zigbee Bastien
Soft Ambient Sync — apply color Tint (0–1) Saturation (0–1) Brightness (0–1) (Light A, Light B (optional), Light C (optional))
i
Rate-limited soft color fade on up to 4 lights (safe Entertainment alternative — no RGB flood)
Zigbee Bastien
Stop Soft Ambient Sync
Zigbee Bastien
Disable Soft Daylight Auto (Light)
Zigbee Bastien
Enable Soft Daylight Auto Recheck every (min) (Light)
i
Continuously follows Daylight Atmosphere with soft CCT/dim steps (full Adaptive-Lighting feel)
Zigbee Bastien
Start Soft Daylight Fade Duration (min) (Light)
i
Gradually moves white/brightness toward Daylight Atmosphere (solar + Room Balance) — branding-free
Zigbee Bastien
Stop Soft Daylight Fade (Light)
Zigbee Bastien
Soft Device Link — link source to lights Mode (Source (remote / sensor), Light A, Light B (optional))
i
App-level remote/sensor → lights (soft binding feel — not Zigbee ZDO bind)
Zigbee Bastien
Disable Soft Feature by id Feature id
i
Disables a previously enabled Soft Feature catalog vector
Zigbee Bastien
Enable Soft Feature by id Feature id
i
Enables one of 200 unbranded catalog vectors (P2567 SoftRecipeRunner)
Zigbee Bastien
Enable all Soft Features (register)
i
Registers all 200 Soft Feature vectors without mass device TX
Zigbee Bastien
Enable Soft Feature family Family
i
Registers all catalog vectors of one family (light, presence, energy, cover, sensor, climate, generic)
Zigbee Bastien
Staggered Leave Off Stagger (ms)
i
Turns lights off with staggered delay — mesh-friendly leave-home (avoids Zigbee storm)
Zigbee Bastien
Set sub-capability Capability On/Off (...)
i
Set a sub-capability value (e.g. onoff.gang2)
Zigbee Bastien
Toggle sub-capability Capability (...)
i
Toggle a boolean sub-capability (e.g., onoff.gang2, smart_home_lock.1)
Zigbee Bastien
Set Capability to Brightness (...)
i
Set a dim sub-capability (e.g. dim.channel2). Homey creates no cards for sub-capabilities.
Zigbee Bastien
Turn off Gang.. Gang (...)
Zigbee Bastien
Turn on Gang.. Gang (...)
Zigbee Bastien
Send Tuya DP DP Number Value (...)
i
Send a raw Tuya datapoint value to the device
Zigbee Bastien
Send typed Tuya DP DP Number DP Type Value (...)
i
Send a Tuya DP with explicit type (bool/value/enum/string/raw/bitmap)
Zigbee Bastien
Clear all rooms
i
Force clear the presence state for all Virtual Presence Detectors
Zigbee Bastien
Welcome Home Soft — lights on zone occupy Zone id (Welcome light A, Welcome light B (optional))
i
When Lamp Mesh zone becomes occupied, soft-fade welcome lights on

지원

이 앱에 문제가 있습니까? 개발자 연락 방법 이메일 보내기.

새로운 기능

버전 1.0.247 — New: energy meters. Fixed: general reliability (TS0601, TS0726, TS0505B) and pairing and device recognition. Faster: lights and dimmers. Behind the scenes: tests and publishing checks.

업데이트 로그 보기

Zigbee Bastien

선택하신 Homey에 Zigbee Bastien이(가) 호환되지 않습니다.

Zigbee Bastien이(가) 곧 Homey에 설치됩니다.
앱 설치