Hikvision NVR & DVR

Every camera. One recorder. Full control.

Attenzione! Questa app potrebbe non funzionare correttamente.

Questa app è in fase di test e non è mai stata recensita. Potrebbe non funzionare come previsto.
Fai molta attenzione quando installi questa app.

« Torna alla versione normale

Every camera. One recorder. Full control.

Leggi di più ›

Dispositivi supportati

Schede dei Flow

Clicca su un dispositivo qui sopra per visualizzare solo le schede dei Flow correlate.

Quando...

Alarm input
L'allarme di contatto è stato attivato
Alarm input
L'allarme di contatto è stato disattivato
Alarm output
Attivato
Alarm output
Disattivato
Camera channel
L'allarme di movimento è stato attivato
Camera channel
L'allarme di movimento è stato disattivato
Camera channel
L'allarme manomissione è stato attivato
Camera channel
L'allarme manomissione è stato disattivato
Camera channel
L'allarme generico è stato attivato
Camera channel
L'allarme generico è stato disattivato
Camera channel
Attivato
Camera channel
Disattivato
Camera channel
Any event occurred on [[device]]
i
Fires for every event, known or unknown — useful for events this app doesn't have a dedicated trigger for yet.
Camera channel
Intrusion stopped
Camera channel
Intrusion started
Camera channel
Line crossing stopped
Camera channel
Line crossing started
Camera channel
Region entry or exit stopped
Camera channel
Region entry or exit started
Doorbell
L'allarme di movimento è stato attivato
Doorbell
L'allarme di movimento è stato disattivato
Doorbell
L'allarme generico è stato attivato
Doorbell
L'allarme generico è stato disattivato
Doorbell
The doorbell button on [[device]] was pressed
IP Camera
L'allarme di movimento è stato attivato
IP Camera
L'allarme di movimento è stato disattivato
IP Camera
L'allarme manomissione è stato attivato
IP Camera
L'allarme manomissione è stato disattivato
IP Camera
L'allarme generico è stato attivato
IP Camera
L'allarme generico è stato disattivato
IP Camera
Intrusion stopped
IP Camera
Intrusion started
IP Camera
Line crossing stopped
IP Camera
Line crossing started
IP Camera
Region entry or exit stopped
IP Camera
Region entry or exit started
Recorder
L'allarme generico è stato attivato
Recorder
L'allarme generico è stato disattivato
Recorder
Was disarmed
i
Fires when detection is switched off for every channel through this app.
Recorder
Was armed
i
Fires when detection is switched back on for every channel through this app.

E...

Alarm input
L'allarme di contatto è acceso
Alarm output
È attivato
Camera channel
L'allarme di movimento è acceso
Camera channel
L'allarme manomissione è acceso
Camera channel
L'allarme generico è acceso
Camera channel
È attivato
Camera channel
Motion detection is on
i
Checks the motion detection setting on the device itself at the moment the Flow runs.
Camera channel
Intrusion is active
Camera channel
Line crossing is active
Camera channel
Region entry or exit is active
Doorbell
L'allarme di movimento è acceso
Doorbell
L'allarme generico è acceso
Doorbell
Motion detection is on
i
Checks the motion detection setting on the device itself at the moment the Flow runs.
IP Camera
L'allarme di movimento è acceso
IP Camera
L'allarme manomissione è acceso
IP Camera
L'allarme generico è acceso
IP Camera
Motion detection is on
i
Checks the motion detection setting on the device itself at the moment the Flow runs.
IP Camera
Intrusion is active
IP Camera
Line crossing is active
IP Camera
Region entry or exit is active
Recorder
L'allarme generico è acceso
Recorder
Hard disk is healthy
i
Healthy means the recorder reports its hard disk status as OK. The status is checked every minute.
Recorder
Is armed
i
Disarmed means detection was turned off on every channel with the Disarm action or the Armed switch of this app.

Poi...

Alarm output
Attiva
Alarm output
Disattiva
Alarm output
Attiva o disattiva
Alarm output
Pulse for Duration ms
Camera channel
Attiva
Camera channel
Disattiva
Camera channel
Attiva o disattiva
Camera channel
Post Event type state Event state to Webhook URL
i
Posts a small JSON payload (device, channel, event type, state, timestamp) — never credentials. 10s timeout, no retries; a failure shows as a Flow error.
Camera channel
Set brightness to Brightness, contrast to Contrast and saturation to Saturation
i
Values match the recorder's own web UI scale (0-255, 128 is the typical default).
Camera channel
Take a snapshot with [[device]]
Advanced
IP Camera
Pan Pan, tilt Tilt, zoom Zoom for Duration ms
i
Only works on cameras that report PTZ support — most fixed cameras and analog DVR channels don't have this.
IP Camera
Go to preset Preset number
i
Only works on cameras that report PTZ support, with the preset already saved on the camera itself.
Recorder
Arm detection
i
Switches detection back on for every channel, restoring exactly the settings each channel had before it was disarmed.
Recorder
Disarm detection
i
Switches detection off on every channel and remembers each channel's exact settings, so Arm detection can restore them later.

Supporto

Lo sviluppatore di questa app non offre un supporto diretto.

Novità

Versione 2.0.0 — Updated images and text

Visualizza il changelog

Hikvision NVR & DVR

Hikvision NVR & DVR non è compatibile con l’Homey selezionato.

Hikvision NVR & DVRverrà installato a breve su Homey.
Installa