Video Doorbell and Lock

This app brings your IP cameras, including video doorbells, together with a smart door lock and your motion or doorbell sensors in one door view. Cameras can stream over RTSP, HLS, RTMP or DASH. Add one or several cameras and watch the live stream at a glance, with no cloud and no transcoding. The app can search your local network to find cameras for you, and for ONVIF cameras it can automatically fill in the stream and snapshot addresses, so in most cases setup is just a tap. It works with any video doorbell or camera that provides such a stream, together with a smart door lock. A door lock, a doorbell sensor and a motion sensor are all optional, so a camera-only device shows just the video, while a fully linked device also shows sensor status and a lock or unlock button in the same place. From there you can build automations: check the camera and unlock when someone rings, turn on the porch light and start recording on motion, or lock the door automatically at night. An ONVIF camera can also act as its own motion sensor, shown separately from any linked motion sensor, and you can switch that camera motion detection on or off. If a camera provides a still-image snapshot address, you can also capture a snapshot within an automation and pass it along as an image, for example inside a push notification. Linked devices can be changed later at any time, and the interface follows your language. Everything runs locally and stays under your control.