Eddi
Encendido
myenergi
Sustainable future through eco-smart technology.
Connect your Zappi EV charger and Eddi power diverter to Homey to get Insights, and control them the way you want.
Start and stop charging your car manually, on a schedule, or by other conditions in a Flow e.g. based on changing energy prices harvested from Tibber or your local power company.
Control your water heater or other heating sources with Eddi power diverter, and set the amount of solar energy you want to use to heat your water or charge your car.
Monitor power and energy consumption directly on each device or via an external Harvi energy sensor.
Dispositivos compatibles
Tarjetas Flow
Haz clic en el dispositivo de arriba para mostrar solo las tarjetas Flow relacionadas.
Cuando...
Eddi
Apagado
Eddi
El contador de energía ha cambiado
Eddi
La potencia ha cambiado
Eddi
La tensión ha cambiado
Eddi
La frecuencia ha cambiado
Harvi
El contador de energía ha cambiado
Harvi
La potencia ha cambiado
Libbi
El nivel de la batería ha cambiado
Libbi
El estado de carga de la batería ha cambiado ...
Libbi
La potencia ha cambiado
Libbi
La tensión ha cambiado
Libbi
La frecuencia ha cambiado
Zappi
Encendido
Zappi
Apagado
Zappi
Carga iniciada
Zappi
Carga detenida
Zappi
El estado de carga del cargador del VE ha cambiado ...
Zappi
La potencia ha cambiado
Zappi
La corriente eléctrica ha cambiado
Zappi
La tensión ha cambiado
Zappi
La frecuencia ha cambiado
Zappi
El contador de energía ha cambiado
Zappi
Charging started
When Zappi starts charging the connected car
Zappi
Charging stopped
When Zappi stops charging the connected car
Zappi
Charge mode changed
When Zappi changed the charge mode
Zappi
Charger status changed
When Zappi changed the charger status
Zappi
Boost mode changed
When Zappi changed the boost mode
Zappi
EV connected
When the EV is connected to Zappi
Zappi
EV disconnected
When the EV is disconnected from Zappi
Y...
Eddi
Está encendido
Libbi
El estado de carga de la batería es ...
Zappi
Está encendido
Zappi
está cargando
Zappi
El estado de carga del cargador del VE es ...
Zappi
Car is charging
Checks if the car is currently being charged by Zappi
Zappi
An EV is connected
Checks if an EV is connected to the Zappi
Zappi
The charger is locked
Checks if the Zappi is currently locked
Zappi
Charge mode is Charge Mode
Checks the current charge mode of the Zappi
Entonces...
Eddi
Encender
Eddi
Apagar
Eddi
Encender o apagar
Eddi
Boost Heater
Heats at full power for the chosen duration, regardless of solar export. Rounded to whole minutes; 1 hour if no duration is set.
Eddi
Stop boosting Heater
Cancels a running manual boost.
Eddi
Reset energy meter (Total)
Resets the total accumulated energy value (kWh) to zero. Use with a schedule, e.g. every midnight, to get daily energy readings.
Harvi
Reset energy meter
Resets the accumulated energy value (kWh) to zero. Use with a schedule, e.g. every midnight, to get daily energy readings.
Libbi
Set Libbi mode to Libbi Mode
Change the Libbi operating mode. Only Normal, Stopped and Export can be set through the myenergi API.
Zappi
Encender
Zappi
Apagar
Zappi
Encender o apagar
Zappi
Iniciar carga
Zappi
Detener carga
Zappi
Unlock the charger
Allow a charge session on a locked Zappi, the same as the unlock in the myenergi app.
Zappi
Start charging the car
Zappi
Stop charging the car
Zappi
Set charge mode to Charge Mode
Zappi
Set minimum green level to Minimum green level
Zappi
Select charge mode to Select Charge Mode
Zappi
Reset energy meter
Resets the accumulated energy value (kWh) to zero. Use with a schedule, e.g. every midnight, to get daily energy readings.
Zappi
Set phase setting to Phase Setting
Switch the Zappi between single phase, three phase or automatic phase charging. Requires a three phase Zappi with firmware that supports phase switching.
Zappi
Set Boost mode to Boost Mode. End boost after kWh kWh, before Complete time o'clock for SMART
Asistencia
¿Tienes algún problema con esta aplicación? Contacta con el desarrollador aquí.
Novedades
Versión 2.4.1 — Zappi: unlock the charger from a flow (same as the unlock in the myenergi app), plus a new locked sensor and flow condition.
myenergi
myenergi no es compatible con el Homey seleccionado.
myenergi se instalará en Homey en breve.
Registro de cambios
¡Enviaremos un agradecimiento a André Biseth!
Le haremos saber a André Biseth que te encanta la aplicación.
Se han enviado tus sugerencias
Avisaremos a André Biseth para que esté al tanto de las sugerencias.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
