NRG.Watch Itho add-on

Control and monitor your Itho ventilation system via MQTT or API in Homey (requires the NRG.Watch Itho add-on).

¡Advertencia! Es posible que esta aplicación no funcione correctamente.

Esta aplicación se está probando y nunca se ha revisado. Puede que no funcione como se espera.
Ten mucho cuidado al instalar esta aplicación.

« Volver a la versión normal

Control and monitor your Itho ventilation system via MQTT or API in Homey (requires the NRG.Watch Itho add-on).

Leer más ›

Dispositivos compatibles

Tarjetas Flow

Haz clic en el dispositivo de arriba para mostrar solo las tarjetas Flow relacionadas.

Cuando...

NRG.Watch Itho (API)
La temperatura ha cambiado
NRG.Watch Itho (API)
La humedad ha cambiado
NRG.Watch Itho (API)
A command failed
NRG.Watch Itho (API)
A command was sent successfully
NRG.Watch Itho (API)
The Itho device went offline
NRG.Watch Itho (API)
The Itho device came online
NRG.Watch Itho (API)
The error state changed
NRG.Watch Itho (API)
The fan preset changed
NRG.Watch Itho (API)
The fan speed changed
NRG.Watch Itho (API)
The humidity changed
NRG.Watch Itho (API)
The temperature changed
NRG.Watch Itho (MQTT)
La temperatura ha cambiado
NRG.Watch Itho (MQTT)
La humedad ha cambiado
NRG.Watch Itho (MQTT)
A command failed
NRG.Watch Itho (MQTT)
A command was sent successfully
NRG.Watch Itho (MQTT)
The Itho device went offline
NRG.Watch Itho (MQTT)
The Itho device came online
NRG.Watch Itho (MQTT)
The error state changed
NRG.Watch Itho (MQTT)
The fan preset changed
NRG.Watch Itho (MQTT)
The fan speed changed
NRG.Watch Itho (MQTT)
The humidity changed
NRG.Watch Itho (MQTT)
MQTT broker connected
NRG.Watch Itho (MQTT)
MQTT broker disconnected
NRG.Watch Itho (MQTT)
Message received on topic Topic
i
Triggers when a message is received on the specified MQTT topic. Supports wildcards: + (single level) and # (multi level).
NRG.Watch Itho (MQTT)
The temperature changed

Y...

NRG.Watch Itho (API)
The Itho device has an error
NRG.Watch Itho (API)
The Itho device is online
NRG.Watch Itho (API)
The fan preset is Preset
NRG.Watch Itho (API)
The fan speed is above Speed (0-255)
NRG.Watch Itho (API)
The fan speed is below Speed (0-255)
NRG.Watch Itho (API)
The fan speed is Speed (0-255)
NRG.Watch Itho (API)
The humidity is above Humidity %
NRG.Watch Itho (API)
The humidity is below Humidity %
NRG.Watch Itho (API)
The temperature is above Temperature °C
NRG.Watch Itho (API)
The temperature is below Temperature °C
NRG.Watch Itho (MQTT)
The Itho device has an error
NRG.Watch Itho (MQTT)
The Itho device is online
NRG.Watch Itho (MQTT)
The fan preset is Preset
NRG.Watch Itho (MQTT)
The fan speed is above Speed (0-255)
NRG.Watch Itho (MQTT)
The fan speed is below Speed (0-255)
NRG.Watch Itho (MQTT)
The fan speed is Speed (0-255)
NRG.Watch Itho (MQTT)
The humidity is above Humidity %
NRG.Watch Itho (MQTT)
The humidity is below Humidity %
NRG.Watch Itho (MQTT)
MQTT broker is connected
NRG.Watch Itho (MQTT)
The temperature is above Temperature °C
NRG.Watch Itho (MQTT)
The temperature is below Temperature °C

Entonces...

NRG.Watch Itho (API)
Clear queued timers and commands
i
Clears queued timers and returns to the fallback/base behavior
NRG.Watch Itho (API)
Send virtual remote command Command
i
Emulates a configured virtual remote
NRG.Watch Itho (API)
Set the fan preset to Preset
i
Sends a preset command such as low, medium, or high
NRG.Watch Itho (API)
Set the fan speed to Speed (0-255)
i
Sets the raw fan speed value in the supported range 0-255
NRG.Watch Itho (API)
Set the fan speed to Speed (0-255) for Seconds seconds
i
Sets the fan speed with a timer
NRG.Watch Itho (API)
Start a timer for Seconds seconds
i
Starts a timed fan action. The exact resulting speed depends on the linked preset or speed.
NRG.Watch Itho (MQTT)
Clear queued timers and commands
i
Clears queued timers and returns to the fallback/base behavior
NRG.Watch Itho (MQTT)
Send Message on topic Topic with QoS Quality of Service and retain Retain
i
Publishes a message to the specified MQTT topic with custom QoS and retain settings
NRG.Watch Itho (MQTT)
Send Message on topic Topic
i
Publishes a message to the specified MQTT topic with default QoS 0 and no retain
NRG.Watch Itho (MQTT)
Send virtual remote command Command
i
Emulates a configured virtual remote
NRG.Watch Itho (MQTT)
Set the fan preset to Preset
i
Sends a preset command such as low, medium, or high
NRG.Watch Itho (MQTT)
Set the fan speed to Speed (0-255)
i
Sets the raw fan speed value in the supported range 0-255
NRG.Watch Itho (MQTT)
Set the fan speed to Speed (0-255) for Seconds seconds
i
Sets the fan speed with a timer
NRG.Watch Itho (MQTT)
Start a timer for Seconds seconds
i
Starts a timed fan action. The exact resulting speed depends on the linked preset or speed.

Asistencia

¿Tienes algún problema con esta aplicación? Contacta con el desarrollador aquí.

Novedades

Versión 1.0.2 — Fixed icons and readme

Ver registro de cambios

NRG.Watch Itho add-on

NRG.Watch Itho add-on no es compatible con el Homey seleccionado.

NRG.Watch Itho add-on se instalará en Homey en breve.
Instalar