Delta Dore Tydom

Local Tydom heating and lighting, set up with one button press.
Local Tydom heating and lighting, set up with one button press.

Read more ›

Supported devices

Flow cards

Click on a device above to show related Flow cards only.

When...

Door/window sensor
The contact alarm turned on
Door/window sensor
The contact alarm turned off
Door/window sensor
The battery alarm turned on
Door/window sensor
The battery alarm turned off
Light
The dim level changed
Light
Turned on
Light
Turned off
Pilot-wire heating
Turned on
Pilot-wire heating
Turned off
Shutter
The position changed
Shutter
The state changed ...
Smoke detector
The smoke alarm turned on
Smoke detector
The smoke alarm turned off
Smoke detector
The battery alarm turned on
Smoke detector
The battery alarm turned off
Temperature sensor
The temperature changes
Temperature sensor
The battery alarm turned on
Temperature sensor
The battery alarm turned off
Thermostat
The temperature changes
Thermostat
The target temperature changed
Thermostat
The thermostat mode changed to ...
Thermostat
Turned on
Thermostat
Turned off
Thermostat
The battery alarm turned on
Thermostat
The battery alarm turned off
Thermostat
Setpoint reached — within Tolerance°C tolerance
i
MODE-AWARE. Fires when the room temperature has hit or passed the setpoint, within [tolerance]°C margin. • In HEATING mode: fires when the room has warmed up to at least (setpoint − tolerance). • In COOLING mode: fires when the room has cooled down to at most (setpoint + tolerance). • In AUTO / OFF: does NOT fire (unclear which direction is 'reached'). Typical use: trigger 'Turn boost off' once the target is reached, regardless of season. Set tolerance to 0 for exact match, or e.g. 0.2°C to end boost slightly before hitting setpoint.
Thermostat
Cannot reach setpoint — off by at least Shortfall°C in the wrong direction
i
MODE-AWARE. Fires when the room temperature is at least [delta]°C off the setpoint in the direction the HVAC is failing. • In HEATING mode: fires when the room is colder than (setpoint − delta). • In COOLING mode: fires when the room is warmer than (setpoint + delta). • In AUTO / OFF: does NOT fire (unclear which direction is 'wrong'). Typical use: trigger 'Turn boost on' when the HVAC is falling behind, regardless of season.
Thermostat
Temperature is at least Delta°C above setpoint
i
Fires when the measured room temperature rises at or above (setpoint + delta). Evaluated on every temperature or setpoint update the thermostat reports.
Thermostat
Temperature is at least Delta°C below setpoint
i
Fires when the measured room temperature falls at or below (setpoint − delta). Evaluated on every temperature or setpoint update the thermostat reports.

And...

Door/window sensor
The contact alarm is on
Door/window sensor
The battery alarm is on
Light
Is turned on
Pilot-wire heating
Is turned on
Shutter
The state is  ...
Smoke detector
The smoke alarm is on
Smoke detector
The battery alarm is on
Temperature sensor
The battery alarm is on
Thermostat
The thermostat mode is ...
Thermostat
Is turned on
Thermostat
The battery alarm is on

Then...

Light
Dim to %
Light
Set relative dim-level %
i
Dim or brighten with respect to the device's current dim-level.
Light
Turn on
Light
Turn off
Light
Toggle on or off
Pilot-wire heating
Turn on
Pilot-wire heating
Turn off
Pilot-wire heating
Toggle on or off
Pilot-wire heating
Set heating mode to ...
Shutter
Set the position to %
i
Change the position to open (100%), closed (0%), or a value in between.
Shutter
Set state ...
Thermostat
Set the temperature °C
Thermostat
Set the thermostat mode to ...
Thermostat
Turn on
Thermostat
Turn off
Thermostat
Toggle on or off
Thermostat
Turn boost off
i
Cancels the thermostat boost (clears the setpoint derogation) so the normal schedule / setpoint resumes.
Thermostat
Turn boost on
i
Forces the thermostat to run at max (setpoint 30°C for heating, 10°C for cooling) until boost is turned off. Uses the Tydom setpoint-derogation mechanism.
Thermostat
Turn boost on for Duration (minutes) minute(s)
i
Forces the thermostat to max (30°C heating / 10°C cooling) for a specific duration, then auto-cancels. The Tydom gateway owns the countdown — if power cycles or the app restarts, boost continues until the timer elapses.

Support

Having an issue with this app? Contact the developer via the developer website.

What’s new

Version 1.3.3 — Fixes all devices becoming unavailable when the Tydom still lists a device it no longer has details for (for example a leftover of a removed device). That device is now skipped and all other devices work normally.

View changelog

Delta Dore Tydom

Delta Dore Tydom is not compatible with the selected Homey.

Delta Dore Tydom will install on Homey shortly.
Install App