Easee Charger
Strømmen ændrede sig
Easee Home
Small. Smart. Full of power.
Start and stop charging your car on a schedule, or based on other conditions you model in a flow. Take action when your car starts charging, or send a notification if no car is connected at a certain time to remind you to plug in your car. Disable your charger if you leave your home for a longer period. Access statistics for the last charge session, last month or for the lifetime of the charger.
Monitor the energy usage of your house via the Easee Equalizer. Take action when you are using 100% of the available power to avoid a main fuse to blow.
For more information about the app and the possibility to get support please visit the forum link in the section below.
Understøttede enheder
Flow-kort
Klik på en enhed ovenfor for kun at vise relaterede Flow-kort.
Når...
Easee Charger
Den elektriske spænding ændrede sig
Easee Charger
Strømmåleren ændrede sig
Easee Charger
Tændt
Easee Charger
Slukket
Easee Charger
Turned off
Easee Charger
Turned on
Easee Charger
Charger status changed
Easee Charger
Charger status changed to Status
Easee Charger
Target charger dynamic current changed
Easee Equalizer
Strømmen ændrede sig
Easee Equalizer
Strømmåleren ændrede sig
Easee Equalizer
Consumption since midnight is [[consumptionSinceMidnight]]kWh
Easee Equalizer
Phase [[phase]] is utilized to [[percentageUtilized]]%, and [[currentUtilized]]A
Og...
Easee Charger
Er tændt
Easee Charger
Charger is turned on
Easee Charger
Charger status is Status
Easee Charger
Charger is ready to start charging
Convenience condition to check if status is Paused, Car connected, or Awaiting Authentication
Easee Charger
Target charger dynamic current is Condition Current (A)
Easee Equalizer
Any phase is utilized above Utilization (%)%
Easee Equalizer
Phase ... is utilized above Utilization (%)%
Så...
Easee Charger
Tændt
Easee Charger
Slukket
Easee Charger
Tænd eller sluk
Easee Charger
Set charger state to State
Not recommended to use too frequently since it will wear out the FLASH storage inside the charger.
Easee Charger
Set dynamic Circuit current to Current
Changes the dynamic current for all chargers on this circuit
Easee Charger
Set dynamic circuit current to Current P1, Current P2 and Current P3
Changes the dynamic current for all chargers on this circuit
Easee Charger
Create schedule, charge between Start time - End time. Repeat: Repeat
Easee Charger
Decrease dynamic circuit current by 1 amp
Easee Charger
Delete schedule
Easee Charger
Disable smart charging
Not recommended to use too frequently since it will wear out the FLASH storage inside the charger.
Easee Charger
Set idle current state to Idle current
Not recommended to use too frequently since it will wear out the FLASH storage inside the charger.
Easee Charger
Enable smart charging
Not recommended to use too frequently since it will wear out the FLASH storage inside the charger.
Easee Charger
Increase dynamic circuit current by 1 amp
Easee Charger
Set led strip brightness to Brightness
Not recommended to use too frequently since it will wear out the FLASH storage inside the charger.
Easee Charger
Set permanent cable lock to Permanent cable lock
Not recommended to use too frequently since it will wear out the FLASH storage inside the charger.
Easee Charger
Override schedule
Easee Charger
Pause Charging
Easee Charger
Pause smart charging
Not recommended to use too frequently since it will wear out the FLASH storage inside the charger.
Easee Charger
Reboot charger
Easee Charger
Resume Charging
Easee Charger
Set charging price to Charging cost incl. Tax in Currency
Easee Charger
Set dynamic charger current to Current
Controls the charger current. Setting to less than ~7A will stop charging. Setting to higher than ~6A will start charging. If access is locked then the charger still needs to be turned on to start charging.
Easee Charger
Set max charger current to Current
Not recommended to use, and don't set higher than installed fuse.
Easee Charger
Toggle on or off
Uses Easee cloud toggle endpoint, i.e. no extra logic applied.
Easee Charger
Turn off
Triggers stop charging, if not successful then automatically trigger pause charging.
Easee Charger
Turn on
Triggers start charging, if not successful then automatically triggers resume charging.
Support
Har du et problem med denne app? Kontakt udvikleren her.
Hvad er nyt
Version 1.8.6 — Added flow cards for pausing and resuming charging sessions.
Easee Home
Easee Home er ikke kompatibel med den valgte Homey.
Easee Home bliver snart installeret på Homey.
Ændringslog
Vi sender en tak til Richard Barkestam!
Vi lader Richard Barkestam vide, at du elsker appen. Overvej måske at støtte Richard Barkestam ved at give en donation?
Donér til Richard Barkestam
Udvikleren af Easee Home tager imod donationer.
Giv et bidrag for at sige tak!
Dit forslag er blevet sendt
Vi giver Richard Barkestam besked, når du har sendt et forslag.
