Battery
Batteriniveauet har ændret sig
Victron Energy
Blue Power
Advarsel! Denne app fungerer muligvis ikke ordentligt.
Denne app er ved at blive testet og er aldrig blevet anmeldt. Den fungerer muligvis ikke som forventet.
Vær ekstra forsigtig, når du installerer denne app.
Instantly monitor the battery state of charge, power consumption, power harvest from PV, and mains. Create a flow to get notified if there is an alarm or a warning.
Build control flows to disable or limit the power of the inverter if a car is charging. Easily control the switch position (mode) of your system; Charger Only, Inverter Only, On or Off. All Victron Energy Storage Systems (ESS) standard actions are supported.
Understøttede enheder
Flow-kort
Klik på en enhed ovenfor for kun at vise relaterede Flow-kort.
Når...
Battery
Batteriets opladningstilstand er ændret ...
Battery
Den generiske alarm blev aktiveret
Battery
Den generiske alarm blev deaktiveret
Battery
Strømmen ændrede sig
Battery
Den elektriske spænding ændrede sig
Battery
Den elektriske strøm ændrede sig
Battery
Temperaturen ændrede sig
Energy Meter
Strømmen ændrede sig
Energy Meter
Strømmåleren ændrede sig
Energy Meter
Grid surplus changed to [[power]] / [[single_phase]] / [[three_phase]]
EV Charger
Tændt
EV Charger
Slukket
EV Charger
Strømmen ændrede sig
EV Charger
Den elektriske strøm ændrede sig
EV Charger
Strømmåleren ændrede sig
EV Charger
Status changed to [[status]]
PV Inverter
Strømmen ændrede sig
Solar Charger
Strømmen ændrede sig
Solar Charger
Den elektriske strøm ændrede sig
Solar Charger
Den elektriske spænding ændrede sig
Solar Charger
Strømmåleren ændrede sig
Tank sensor
Status changed to [[status]]
Tank sensor
Tank level changed to [[level]]
Temperature sensor
Temperaturen ændrede sig
Temperature sensor
Luftfugtigheden ændrede sig
Temperature sensor
Trykkey ændrede sig
Temperature sensor
Den elektriske spænding ændrede sig
Temperature sensor
Status changed to [[status]]
Victron GX
Strømmen ændrede sig
Victron GX
Alarm status changed to [[status]] with [[alarms]] and [[warnings]]
Victron GX
Dynamic ESS mode changed to Mode
Victron GX
Input source changed to [[source]]
Victron GX
Switch position changed
Victron GX
VE Bus status changed to [[status]]
Og...
Battery
Batteriets opladningstilstand er ...
Battery
Den generiske alarm er tændt
Battery
Time since last full charge is less than Time (seconds)
EV Charger
Er tændt
Victron GX
AC inputs are below Power (W)
Victron GX
AC loads are below Power (W)
Victron GX
AC outputs are below Power (W)
Victron GX
Max charge current is Condition Current (A)
Victron GX
Consumption power is below Power (W)
Victron GX
Excess solar power is below Power (W)
Victron GX
Max grid feed-in power is Condition Power (W)
Victron GX
Grid power is below Power (W)
Victron GX
Grid setpoint is Condition Power (W)
Victron GX
Input source is Source
Victron GX
Max discharge power is Condition Power (W)
Victron GX
Min SoC is Condition SoC (%)
Victron GX
Scheduled charging is enabled for schedule Schedule
Victron GX
Solar power is below Power (W)
Victron GX
Switch position is Mode
Victron GX
VE Bus status is Status
Så...
EV Charger
Tændt
EV Charger
Slukket
EV Charger
Tænd eller sluk
EV Charger
Set EV charger max current to Current (A)
Used for chargers in manual mode. Sets the maximum charge current
EV Charger
Set EV charger mode to Mode
Victron GX
Create charging schedule Schedule for Day at Start time with duration Duration or SoC SoC
Creates a charging schedule. Please note you need to enter your GX device's root password in the device settings.
Victron GX
Disable charging schedule Schedule
Disables a charging schedule. Please note you need to enter your GX device's root password in the device settings.
Victron GX
Enable charging schedule Schedule
Enables a charging schedule. Please note you need to enter your GX device's root password in the device settings.
Victron GX
Limit charge current to Current (A)
Sets the maximum charge current (defined under the DVCC section).
Victron GX
Limit grid feed-in power to Power (W)
Victron GX
Limit AC import to Current (A) when peakshaving
Passing value -1 will disable the limit
Victron GX
Limit discharge power to Power (W)
Sets the maximum inverter power (defined under ESS).
Victron GX
Set batteryLife state to Mode
Victron GX
Set dynamic ESS mode to Mode
Victron GX
Set multiphase regulation state to Mode
Victron GX
Switch relay 1 to State
Victron GX
Switch relay 2 to State
Victron GX
Set switch position to Mode
Victron GX
Update grid setpoint to Power (W)
Sets the grid setpoint (defined under ESS).
Victron GX
Update minimum SoC to SoC (%)
Sets the minimum SoC, unless grid fails (defined under ESS).
Support
Har du et problem med denne app? Kontakt udvikleren her.
Hvad er nyt
Version 1.4.1 — New action for setting the dynamic ESS mode
Victron Energy
Victron Energy er ikke kompatibel med den valgte Homey.
Victron Energy bliver snart installeret på Homey.
Ændringslog
Vi sender en tak til Richard Barkestam!
Vi lader Richard Barkestam vide, at du elsker appen. Overvej måske at støtte Richard Barkestam ved at give en donation?
Donér til Richard Barkestam
Udvikleren af Victron Energy tager imod donationer.
Giv et bidrag for at sige tak!
Dit forslag er blevet sendt
Vi giver Richard Barkestam besked, når du har sendt et forslag.
