LinkTap
Włączone
LinkTap
A water timer that gives you total peace of mind.
Connect your LinkTap valves so you can control them directly from Homey.
Use the power of Homey flows to automate your watering schedule with the Instant mode or simply select one of the LinkTap predefined modes.
Set the required watering duration along with the Eco mode settings from the devices advanced settings and then simply turn the valves off and on as required.
For full automation use the flow action card to set all the desired parameters and start or stop the Instant mode.
Get notifications when watering starts and stops as well as the alarms for low battery, a fallen or broken valve or when the water supply has been switched off.
View and chart the water flow rate and volume of water used durning each watering session in Insights.
Suggestions or problems?
If you have a device that's not supported or a suggestion or problem with this app please go to the forum or the github page linked on the app store page and let me know.
Obsługiwane urządzenia
Karty Flow
Kliknij na urządzenie powyżej, aby wyświetlić tylko powiązane karty Flow.
Kiedy...
LinkTap
Wyłączone
LinkTap
Zmienił się poziom baterii
LinkTap
Zmienił się przepływ wody
LinkTap
Zmiana w liczniku wody
LinkTap
Alarm zalania wodą włączony
LinkTap
Alarm zalania wodą wyłączony
LinkTap
The valve is repaired
When the valve in not broken
LinkTap
The valve is broken
When the valve fails
LinkTap
The valve has been put back
When the valve has been put back
LinkTap
The valve has fallen
When the valve falls down
LinkTap
Freeze alarm turned off
When there is no longer a chance of freezing
LinkTap
Freeze alarm turned on
When there is a chance of freezing
LinkTap
High Water flow alarm turned off
The leak is fixed
LinkTap
High water flow alarm turned on
When there is a leak
LinkTap
Low water flow alarm turned on
When there is a blockage
LinkTap
Low water flow alarm turned off
The blockage is clear
LinkTap
Watering has finished
When the watering has finished
LinkTap
The watering cycle has been skipped
When the watering cycle has been skipped due to rain
LinkTap
Watering has started
When the watering has started
Oraz...
LinkTap
Jest włączone
LinkTap
Alarm zalania wodą jest włączony
LinkTap
Valve has failed
This Flow will continue if the valve has/has not failed.
LinkTap
Valve has fallen
This Flow will continue if the valve has/has not fallen down.
LinkTap
Watering is in progress
This Flow will continue if watering is/is not currently in progress.
Wtedy...
LinkTap
Włącz
LinkTap
Wyłącz
LinkTap
Przełącz na wł. lub wył.
LinkTap
Activate Instant Mode for Duration minutes. Eco mode is Eco mode using Eco On Time minute On and Eco Off Time minute off times. At the end the mode will Action at end
LinkTap
Turn Off Instant Mode
LinkTap
Activate Watering Plan Watering Mode
Pomoc
Masz problem z tą aplikacją? Skontaktuj się z twórcami aplikacji tutaj.
Nowości
Wersja 1.0.25 — Revert to previous watering plan when Instant mode stopped manually.
LinkTap
LinkTap nie jest kompatybilna z wybranym Homey.
LinkTap zostanie wkrótce zainstalowana na Homey.
Lista zmian
Wyślemy podziękowanie do RockSoft Solutions!
Poinformujemy RockSoft Solutions, że uwielbiasz tę aplikację.
Twoja sugestia została wysłana
Powiadomimy RockSoft Solutions o otrzymaniu sugestii.
