NRG.Watch Itho (API)
온도가 변경되면
NRG.Watch Itho add-on
Control and monitor your Itho ventilation system via MQTT or API in Homey (requires the NRG.Watch Itho add-on).
경고! 이 앱이 제대로 작동하지 않을 수 있습니다.
이 앱 버전은 현재 테스트 중이며 아직 검토되지 않았습니다. 기대한 대로 작동하지 않을 수 있습니다.
이 앱을 설치할 때는 각별히 주의하세요.
Integrate your Itho ventilation system with Homey using the NRG.Watch Itho add-on hardware module. This integration enables automated climate control based on humidity, temperature, or time schedules, creating a healthier and more comfortable indoor environment.
Connect via MQTT for real-time updates or HTTP API for polling-based control. Monitor indoor climate with temperature and humidity sensors, control fan speeds and presets, and track system health with error monitoring and diagnostic data. The app supports both standard Itho units and systems with CC1101 RF modules for extended functionality.
Set up is straightforward: add the device in Homey, choose your connection method (MQTT or API), select your Itho device type, and configure the connection settings. The app handles all communication with your ventilation system automatically.
지원되는 디바이스
Flow 카드
위의 디바이스를 클릭하면 관련 Flow 카드만 표시됩니다.
언제...
NRG.Watch Itho (API)
습도가 변경되면
NRG.Watch Itho (API)
A command failed
NRG.Watch Itho (API)
A command was sent successfully
NRG.Watch Itho (API)
The Itho device went offline
NRG.Watch Itho (API)
The Itho device came online
NRG.Watch Itho (API)
The error state changed
NRG.Watch Itho (API)
The fan preset changed
NRG.Watch Itho (API)
The fan speed changed
NRG.Watch Itho (API)
The humidity changed
NRG.Watch Itho (API)
The temperature changed
NRG.Watch Itho (MQTT)
온도가 변경되면
NRG.Watch Itho (MQTT)
습도가 변경되면
NRG.Watch Itho (MQTT)
A command failed
NRG.Watch Itho (MQTT)
A command was sent successfully
NRG.Watch Itho (MQTT)
The Itho device went offline
NRG.Watch Itho (MQTT)
The Itho device came online
NRG.Watch Itho (MQTT)
The error state changed
NRG.Watch Itho (MQTT)
The fan preset changed
NRG.Watch Itho (MQTT)
The fan speed changed
NRG.Watch Itho (MQTT)
The humidity changed
NRG.Watch Itho (MQTT)
MQTT broker connected
NRG.Watch Itho (MQTT)
MQTT broker disconnected
NRG.Watch Itho (MQTT)
Message received on topic Topic
Triggers when a message is received on the specified MQTT topic. Supports wildcards: + (single level) and # (multi level).
NRG.Watch Itho (MQTT)
The temperature changed
그리고...
NRG.Watch Itho (API)
The Itho device has an error
NRG.Watch Itho (API)
The Itho device is online
NRG.Watch Itho (API)
The fan preset is Preset
NRG.Watch Itho (API)
The fan speed is above Speed (0-255)
NRG.Watch Itho (API)
The fan speed is below Speed (0-255)
NRG.Watch Itho (API)
The fan speed is Speed (0-255)
NRG.Watch Itho (API)
The humidity is above Humidity %
NRG.Watch Itho (API)
The humidity is below Humidity %
NRG.Watch Itho (API)
The temperature is above Temperature °C
NRG.Watch Itho (API)
The temperature is below Temperature °C
NRG.Watch Itho (MQTT)
The Itho device has an error
NRG.Watch Itho (MQTT)
The Itho device is online
NRG.Watch Itho (MQTT)
The fan preset is Preset
NRG.Watch Itho (MQTT)
The fan speed is above Speed (0-255)
NRG.Watch Itho (MQTT)
The fan speed is below Speed (0-255)
NRG.Watch Itho (MQTT)
The fan speed is Speed (0-255)
NRG.Watch Itho (MQTT)
The humidity is above Humidity %
NRG.Watch Itho (MQTT)
The humidity is below Humidity %
NRG.Watch Itho (MQTT)
MQTT broker is connected
NRG.Watch Itho (MQTT)
The temperature is above Temperature °C
NRG.Watch Itho (MQTT)
The temperature is below Temperature °C
그러면...
NRG.Watch Itho (API)
Clear queued timers and commands
Clears queued timers and returns to the fallback/base behavior
NRG.Watch Itho (API)
Send virtual remote command Command
Emulates a configured virtual remote
NRG.Watch Itho (API)
Set the fan preset to Preset
Sends a preset command such as low, medium, or high
NRG.Watch Itho (API)
Set the fan speed to Speed (0-255)
Sets the raw fan speed value in the supported range 0-255
NRG.Watch Itho (API)
Set the fan speed to Speed (0-255) for Seconds seconds
Sets the fan speed with a timer
NRG.Watch Itho (API)
Start a timer for Seconds seconds
Starts a timed fan action. The exact resulting speed depends on the linked preset or speed.
NRG.Watch Itho (MQTT)
Clear queued timers and commands
Clears queued timers and returns to the fallback/base behavior
NRG.Watch Itho (MQTT)
Send Message on topic Topic with QoS Quality of Service and retain Retain
Publishes a message to the specified MQTT topic with custom QoS and retain settings
NRG.Watch Itho (MQTT)
Send Message on topic Topic
Publishes a message to the specified MQTT topic with default QoS 0 and no retain
NRG.Watch Itho (MQTT)
Send virtual remote command Command
Emulates a configured virtual remote
NRG.Watch Itho (MQTT)
Set the fan preset to Preset
Sends a preset command such as low, medium, or high
NRG.Watch Itho (MQTT)
Set the fan speed to Speed (0-255)
Sets the raw fan speed value in the supported range 0-255
NRG.Watch Itho (MQTT)
Set the fan speed to Speed (0-255) for Seconds seconds
Sets the fan speed with a timer
NRG.Watch Itho (MQTT)
Start a timer for Seconds seconds
Starts a timed fan action. The exact resulting speed depends on the linked preset or speed.
지원
이 앱에 문제가 있습니까? 개발자에게 문의하려면 여기를 클릭하세요..
새로운 기능
버전 1.0.2 — Fixed icons and readme
NRG.Watch Itho add-on
선택하신 Homey에 NRG.Watch Itho add-on이(가) 호환되지 않습니다.
NRG.Watch Itho add-on이(가) 곧 Homey에 설치됩니다.
업데이트 로그
Robert Coemans 님에게 고맙다는 인사를 전해드리겠습니다!
Robert Coemans 님께 앱을 잘 사용하고 있다고 알려주세요.
제안이 전송되었습니다.
제안을 보내주셨다고 Robert Coemans 님에게 알리겠습니다.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
