AX Ventildriver OP
켜지면
CTM Lyng
CTM Lyng OP! Freedom to chose.
경고! 이 앱이 제대로 작동하지 않을 수 있습니다.
이 앱 버전은 현재 테스트 중이며 아직 검토되지 않았습니다. 기대한 대로 작동하지 않을 수 있습니다.
이 앱을 설치할 때는 각별히 주의하세요.
Adds support for CTM Lyng OP products.
Let Homey control your CTM Lyng OP products.
With thermostats, you can optimize consumption based on usage patterns and electricity prices. This way, you can maintain the same comfort while reducing your electricity bill.
With smart relays, you can shift hot water boiler load to when electricity is cheaper.
With smart lighting control, you can easily change the ambiance in your home.
With safety and security products like Power Cut-off, Stove Guard, and Water Stop, you can stay in control when you're not at home.
Only your imagination sets limits on what you can do
지원되는 디바이스
Flow 카드
위의 디바이스를 클릭하면 관련 Flow 카드만 표시됩니다.
언제...
AX Ventildriver OP
꺼지면
AX Ventildriver OP
누수가 감지되면
AX Ventildriver OP
누수가 감지되지 않으면
AX Water leak sensor OP
배터리 알람이 '예'이면
AX Water leak sensor OP
배터리 알람이 '아니요'이면
AX Water leak sensor OP
누수가 감지되면
AX Water leak sensor OP
누수가 감지되지 않으면
CTM Lyng
Reporting timeout
If the watchdog is enabled in the device settings, this flow will be triggered if the device has not reported within the device's reporting interval.
DimmerPille OP
밝기가 변경되면
DimmerPille OP
켜지면
DimmerPille OP
꺼지면
MBD-Dim Bevegelse OP
켜지면
MBD-Dim Bevegelse OP
꺼지면
MBD-Dim Bevegelse OP
움직임이 감지되면
MBD-Dim Bevegelse OP
움직임이 없으면
MBD-Dim Bevegelse OP
조도가 변경되면
MBD-Dim Bevegelse OP
밝기가 변경되면
MBD-S OP
켜지면
MBD-S OP
꺼지면
MBD-S OP
움직임이 감지되면
MBD-S OP
움직임이 없으면
MBD-S OP
조도가 변경되면
MBD-S OP
Motion sensor status changed
The motion sensor can be controlled independently of the relay, allowing you to override the automatic function. By turning off the motion sensor, it will not turn the light on again upon detecting movement
mKomfy 1.8 Komfyrvakt
배터리 알람이 '예'이면
mKomfy 1.8 Komfyrvakt
배터리 알람이 '아니요'이면
mKomfy 1.8 Komfyrvakt
과열이 감지되면
mKomfy 1.8 Komfyrvakt
과열 감지가 정상 상태이면
mKomfy 1.8 Komfyrvakt
알람이 켜지면
mKomfy 1.8 Komfyrvakt
알람이 꺼지면
mKomfy Tak Komfyrvakt
배터리 알람이 '예'이면
mKomfy Tak Komfyrvakt
배터리 알람이 '아니요'이면
mKomfy Tak Komfyrvakt
과열이 감지되면
mKomfy Tak Komfyrvakt
과열 감지가 정상 상태이면
mKomfy Tak Komfyrvakt
알람이 켜지면
mKomfy Tak Komfyrvakt
알람이 꺼지면
mStikk 16A OP
켜지면
mStikk 16A OP
꺼지면
mStikk 16A OP
전력이 변경되면
mStikk 16A OP
전력량이 변경되면
mStikk 25A OP
켜지면
mStikk 25A OP
꺼지면
mStikk 25A OP
전력이 변경되면
mStikk 25A OP
전력량이 변경되면
mTouch Astro OP
켜지면
mTouch Astro OP
꺼지면
mTouch Bryter OP
배터리 수준이 변경되면
mTouch Bryter OP
온도가 변경되면
mTouch Bryter OP
mTouch Bryter Button 1: Shortpress
If the top button on the mTouch Bryter is operated with a short press, this card will be activated.
mTouch Bryter OP
mTouch Bryter Button 2: Short press
If the middle button on the mTouch Bryter is operated with a short press, this card will be activated
mTouch Bryter OP
mTouch Bryter Button 3: Short press
If the bottom button on the mTouch Bryter is operated with a short press, this card will be activated.
mTouch Bryter OP
mTouch Bryter Button 1: Long press
If the top button on the mTouch Bryter is operated with a long press, this card will be activated.
mTouch Bryter OP
mTouch Bryter Button 2: Long press
If the middle button on the mTouch Bryter is operated with a long press, this card will be activated
mTouch Bryter OP
mTouch Bryter Button 3: Long press
If the bottom button on the mTouch Bryter is operated with a long press, this card will be activated.
mTouch Dim OP
밝기가 변경되면
mTouch Dim OP
켜지면
mTouch Dim OP
꺼지면
mTouch Luftføler OP
배터리 수준이 변경되면
mTouch Luftføler OP
습도가 변경되면
mTouch Luftføler OP
온도가 변경되면
mTouch One OP
온도가 변경되면
mTouch One OP
희망 온도가 변경되면
mTouch One OP
전력이 변경되면
mTouch One OP
전력량이 변경되면
mTouch One OP
켜지면
mTouch One OP
꺼지면
mTouch One OP
Relay changed
mTouch One OP
Thermostat mode is changed
mTouch One OP
KeyLock changed
Strømkutt Mic OP
배터리 알람이 '예'이면
Strømkutt Mic OP
배터리 알람이 '아니요'이면
Strømkutt Mic OP
화재가 감지되면
Strømkutt Mic OP
화재 감지가 정상 상태이면
Strømkutt Mic OP
Strømkutt Mic triggered
If the button on the Strømkutt Mic is operated, this card will run.
TavleRele 25A
켜지면
TavleRele 25A
꺼지면
TavleRele 25A
전력이 변경되면
TavleRele 25A
전력량이 변경되면
그리고...
AX Ventildriver OP
켜지면
AX Ventildriver OP
누수가 감지되면
AX Water leak sensor OP
배터리 알람이 '예'이면
AX Water leak sensor OP
누수가 감지되면
DimmerPille OP
켜지면
MBD-Dim Bevegelse OP
켜지면
MBD-Dim Bevegelse OP
움직임이 감지되면
MBD-S OP
켜지면
MBD-S OP
움직임이 감지되면
MBD-S OP
Motion sensor is turned on
The motion sensor can be controlled independently of the relay, allowing you to override the automatic function. By turning off the motion sensor, it will not turn the light on again upon detecting movement
mKomfy 1.8 Komfyrvakt
배터리 알람이 '예'이면
mKomfy 1.8 Komfyrvakt
과열이 감지되면
mKomfy 1.8 Komfyrvakt
알람이 켜지면
mKomfy Tak Komfyrvakt
배터리 알람이 '예'이면
mKomfy Tak Komfyrvakt
과열이 감지되면
mKomfy Tak Komfyrvakt
알람이 켜지면
mStikk 16A OP
켜지면
mStikk 25A OP
켜지면
mTouch Astro OP
켜지면
mTouch Dim OP
켜지면
mTouch Luftføler OP
Humidity is greater than or equal to %
mTouch Luftføler OP
Temperature is greater than or equal to °C
mTouch One OP
켜지면
mTouch One OP
Thermostat is heating
Current status of the relay. Does not apply to all thermostat versions. Dependent on firmware.
mTouch One OP
Energy control active
mTouch One OP
Keylock active
mTouch One OP
Device mode is state:
Frost guard and Off is the same
mTouch One OP
Regulator mode is mode:
Strømkutt Mic OP
배터리 알람이 '예'이면
Strømkutt Mic OP
화재가 감지되면
TavleRele 25A
켜지면
그러면...
AX Ventildriver OP
켜기
AX Ventildriver OP
끄기
AX Ventildriver OP
켬/끔 상태 전환하기
DimmerPille OP
다음 밝기로 조절 %
DimmerPille OP
상대 밝기 설정 %
제품의 현재 디밍 수준에 따라 어둡게 또는 밝게 설정돼요.
DimmerPille OP
켜기
DimmerPille OP
끄기
DimmerPille OP
켬/끔 상태 전환하기
MBD-Dim Bevegelse OP
켜기
MBD-Dim Bevegelse OP
끄기
MBD-Dim Bevegelse OP
켬/끔 상태 전환하기
MBD-Dim Bevegelse OP
다음 밝기로 조절 %
MBD-Dim Bevegelse OP
상대 밝기 설정 %
제품의 현재 디밍 수준에 따라 어둡게 또는 밝게 설정돼요.
MBD-Dim Bevegelse OP
Change dim level to %
You can use this to adjust the dimmer level without the light turning on. The dimmer will then start at this level on the next motion.
MBD-Dim Bevegelse OP
Activate motion sensor Motion sensor
The motion sensor can be controlled independently of the relay, allowing you to override the automatic function. By turning off the motion sensor, it will not turn the light on again upon detecting movement
MBD-S OP
켜기
MBD-S OP
끄기
MBD-S OP
켬/끔 상태 전환하기
MBD-S OP
Activate motion sensor Motion sensor
The motion sensor can be controlled independently of the relay, allowing you to override the automatic function. By turning off the motion sensor, it will not turn the light on again upon detecting movement
mStikk 16A OP
켜기
mStikk 16A OP
끄기
mStikk 16A OP
켬/끔 상태 전환하기
mStikk 25A OP
켜기
mStikk 25A OP
끄기
mStikk 25A OP
켬/끔 상태 전환하기
mTouch Astro OP
켜기
mTouch Astro OP
끄기
mTouch Astro OP
켬/끔 상태 전환하기
mTouch Dim OP
다음 밝기로 조절 %
mTouch Dim OP
상대 밝기 설정 %
제품의 현재 디밍 수준에 따라 어둡게 또는 밝게 설정돼요.
mTouch Dim OP
켜기
mTouch Dim OP
끄기
mTouch Dim OP
켬/끔 상태 전환하기
mTouch One OP
희망 온도 설정 °C
mTouch One OP
켜기
mTouch One OP
끄기
mTouch One OP
켬/끔 상태 전환하기
mTouch One OP
Set thermostat in state:
This function can be used to change between On, Night saving and Off
mTouch One OP
Set thermostat in mode: and set setpoint to Setpoint
This function can be used to switch between Thermostat, Regulator or Zzilent. Remember to set new setpoint
mTouch One OP
Use Energy control to change setpoint: Positive or negative number in celsius
Energy control can be used to change the setpoint of the thermostat through, for example, smart power management. During high prices, a negative temperature is set, and the opposite is done during low prices. This is a feature that is handled in Homey and not in the thermostat itself. Do not work in regulator mode
mTouch One OP
Deactivate energy control
Disables energy control and sets the setpoint back to when energy control was activated. Manual adjustments made on the thermostat in the meantime will be discarded.
mTouch One OP
Set keylock to Enabled
Tur on and off keylock
TavleRele 25A
켜기
TavleRele 25A
끄기
TavleRele 25A
켬/끔 상태 전환하기
지원
이 앱에 문제가 있습니까? 개발자에게 문의하려면 여기를 클릭하세요..
새로운 기능
버전 1.1.47 — Improvement on zoneEnrollResponse for the AX Ventildriver OP
업데이트 로그
CTM Lyng 님에게 고맙다는 인사를 전해드리겠습니다!
CTM Lyng 님께 앱을 잘 사용하고 있다고 알려주세요.
제안이 전송되었습니다.
제안을 보내주셨다고 CTM Lyng 님에게 알리겠습니다.
