Ajax Button/Remote
El nivel de la batería ha cambiado
Ajax Systems
Control and monitor your Ajax security system from Homey
Connect your Ajax security system to Homey and bring your intrusion, fire, and water protection into your smart home.
This app integrates with Ajax Systems security hubs, supporting both local network communication (SIA protocol) and cloud-based connection modes. No API key or cloud access is required for basic monitoring using SIA mode.
What you can do:
- Monitor your alarm state - see when your system is armed, disarmed, or in night mode
- Receive alarm events in real-time - fire, intrusion, water leak, tamper, and more
- Arm and disarm your Ajax system from Homey or through Homey flows (Enterprise API / Proxy modes)
- Monitor motion sensors, door/window contacts, smoke and fire detectors, water leak sensors, glass break detectors, and more
- Control smart plugs and relays
- Track battery levels, signal strength, and online status for all devices
- Use night mode for partial arming
- Trigger Homey flows on alarm events, system state changes, and device status
Connection modes:
- SIA Protocol (Local Network): Receive events directly from your hub over the local network using the industry-standard SIA DC-09 protocol. No API key or cloud access needed. Just configure your hub's Monitoring Station to send to your Homey's IP address.
- Enterprise API (User): Full cloud access with an Ajax API key and your account credentials
- Enterprise API (Company): Cloud access using a company token for managed installations
- Proxy Server: Cloud access through a third-party proxy server (no API key needed), with SSE real-time events
SIA Protocol mode (recommended for most users):
Your Ajax hub sends alarm events directly to Homey over your local network. Set it up in three steps:
1. Add an Ajax Hub in Homey and select "SIA Protocol" mode
2. Enter a listening port (default: 5000) and your hub's account ID
3. In the Ajax app, configure Hub Settings > Monitoring Station to point to your Homey's IP and port
SIA mode supports arm/disarm tracking, alarm events (fire, intrusion, water, tamper), night mode, supervision heartbeats, and optional AES-128 encryption. Note: SIA is receive-only. To arm/disarm from Homey, use Enterprise API or Proxy mode.
Supported devices:
- Hub 2 / Hub 2 Plus / Hub Hybrid
- Security Groups (per-group arm/disarm)
- MotionProtect, MotionProtect Plus, MotionProtect Outdoor, MotionCam, CombiProtect
- DoorProtect, DoorProtect Plus
- FireProtect, FireProtect Plus, FireProtect 2
- LeaksProtect
- GlassProtect
- HomeSiren, StreetSiren, StreetSiren DoubleDeck
- Socket, Relay, WallSwitch, LightSwitch
- Button, DoubleButton, SpaceControl
- LifeQuality air quality monitor
Requirements:
- An Ajax hub on your local network (for SIA mode), or
- An Ajax Enterprise API key, company token, or compatible proxy server (for cloud modes)
Dispositivos compatibles
Tarjetas Flow
Haz clic en el dispositivo de arriba para mostrar solo las tarjetas Flow relacionadas.
Cuando...
Ajax Door/Window Sensor
La alarma de contacto se ha activado
Ajax Door/Window Sensor
La alarma de contacto se ha desactivado
Ajax Door/Window Sensor
La alarma de manipulación se ha activado
Ajax Door/Window Sensor
La alarma de manipulación se ha desactivado
Ajax Door/Window Sensor
El nivel de la batería ha cambiado
Ajax Door/Window Sensor
La temperatura ha cambiado
Ajax Glass Break Detector
La alarma de manipulación se ha activado
Ajax Glass Break Detector
La alarma de manipulación se ha desactivado
Ajax Glass Break Detector
El nivel de la batería ha cambiado
Ajax Hub
El estado ha cambiado ...
Ajax Hub
La alarma de manipulación se ha activado
Ajax Hub
La alarma de manipulación se ha desactivado
Ajax Hub
El nivel de la batería ha cambiado
Ajax KeyPad
La alarma de manipulación se ha activado
Ajax KeyPad
La alarma de manipulación se ha desactivado
Ajax KeyPad
El nivel de la batería ha cambiado
Ajax LifeQuality Air Sensor
La temperatura ha cambiado
Ajax LifeQuality Air Sensor
La humedad ha cambiado
Ajax LifeQuality Air Sensor
El nivel de CO₂ ha cambiado
Ajax LifeQuality Air Sensor
El nivel de la batería ha cambiado
Ajax Motion Sensor
La alarma de movimiento se ha activado
Ajax Motion Sensor
La alarma de movimiento se ha desactivado
Ajax Motion Sensor
La alarma de manipulación se ha activado
Ajax Motion Sensor
La alarma de manipulación se ha desactivado
Ajax Motion Sensor
El nivel de la batería ha cambiado
Ajax Motion Sensor
La temperatura ha cambiado
Ajax Range Extender
La alarma de manipulación se ha activado
Ajax Range Extender
La alarma de manipulación se ha desactivado
Ajax Range Extender
El nivel de la batería ha cambiado
Ajax Security Group
El estado ha cambiado ...
Ajax Siren
La alarma de manipulación se ha activado
Ajax Siren
La alarma de manipulación se ha desactivado
Ajax Siren
El nivel de la batería ha cambiado
Ajax Smoke/Fire Detector
La alarma de humo se ha activado
Ajax Smoke/Fire Detector
La alarma de humo se ha desactivado
Ajax Smoke/Fire Detector
La alarma de calor se ha activado
Ajax Smoke/Fire Detector
La alarma de calor se ha desactivado
Ajax Smoke/Fire Detector
La alarma de CO se ha activado
Ajax Smoke/Fire Detector
La alarma de CO se ha desactivado
Ajax Smoke/Fire Detector
La alarma de manipulación se ha activado
Ajax Smoke/Fire Detector
La alarma de manipulación se ha desactivado
Ajax Smoke/Fire Detector
El nivel de la batería ha cambiado
Ajax Smoke/Fire Detector
La temperatura ha cambiado
Ajax Socket/Relay
Encendido
Ajax Socket/Relay
Apagado
Ajax Socket/Relay
La potencia ha cambiado
Ajax Socket/Relay
El contador de energía ha cambiado
Ajax Socket/Relay
La tensión ha cambiado
Ajax Socket/Relay
La alarma de manipulación se ha activado
Ajax Socket/Relay
La alarma de manipulación se ha desactivado
Ajax Socket/Relay
El nivel de la batería ha cambiado
Ajax Systems
An alarm event occurred
Triggers when any Ajax alarm event is received
Ajax Systems
An alarm was restored
Triggers when any alarm is cleared or restored
Ajax Systems
Armed with malfunctions
Triggers when the system is armed despite device faults or malfunctions
Ajax Systems
Arming attempt failed
Triggers when the system could not be armed
Ajax Systems
Burglary alarm triggered
Triggers when an intrusion or burglary alarm is detected
Ajax Systems
Device connection lost
Triggers when a sensor or device loses connection to the hub
Ajax Systems
Device connection restored
Triggers when a sensor or device reconnects to the hub
Ajax Systems
Duress alarm triggered
Triggers when the system is disarmed under duress (coercion). This is a silent distress signal.
Ajax Systems
Fire alarm triggered
Triggers when a fire, smoke, or high temperature alarm is detected
Ajax Systems
Gas / CO alarm triggered
Triggers when a gas or carbon monoxide alarm is detected
Ajax Systems
A group was armed
Triggers when a security group is armed
Ajax Systems
A group was disarmed
Triggers when a security group is disarmed
Ajax Systems
Hub was armed
Triggers when an Ajax hub is armed
Ajax Systems
Hub was disarmed
Triggers when an Ajax hub is disarmed
Ajax Systems
Hub went offline
Triggers when an Ajax hub loses connection
Ajax Systems
Hub came online
Triggers when an Ajax hub reconnects
Ajax Systems
Medical alarm triggered
Triggers when a medical emergency alarm is activated
Ajax Systems
Night mode was activated
Triggers when night mode is armed
Ajax Systems
Night mode was deactivated
Triggers when night mode is disarmed
Ajax Systems
Panic alarm triggered
Triggers when a panic button is pressed on any Ajax device
Ajax Systems
Power problem resolved
Triggers when a power problem is resolved (battery charged, AC power restored, etc.)
Ajax Systems
Power problem detected
Triggers on AC power loss, low battery, battery missing, or external power failure
Ajax Systems
System event occurred
Triggers on system lifecycle events: power on/off, factory reset, firmware update, settings change, or periodic test
Ajax Systems
Tamper alarm triggered
Triggers when a device lid is opened or a device is moved
Ajax Systems
Tamper alarm restored
Triggers when a tamper condition is cleared
Ajax Systems
A trouble condition occurred
Triggers on sensor trouble: fire sensor failure, smoke chamber dirty, RF interference, brute-force attempt, or accelerometer fault
Ajax Systems
A trouble condition resolved
Triggers when a trouble condition is cleared
Ajax Systems
Water leak detected
Triggers when a water leak is detected
Ajax Systems
A zone was bypassed
Triggers when a sensor zone is bypassed
Ajax Systems
A zone bypass was removed
Triggers when a zone bypass is removed
Ajax Transmitter
La alarma de contacto se ha activado
Ajax Transmitter
La alarma de contacto se ha desactivado
Ajax Transmitter
La alarma de manipulación se ha activado
Ajax Transmitter
La alarma de manipulación se ha desactivado
Ajax Transmitter
El nivel de la batería ha cambiado
Ajax Water Leak Detector
La alarma de agua se ha activado
Ajax Water Leak Detector
La alarma de agua se ha desactivado
Ajax Water Leak Detector
La alarma de manipulación se ha activado
Ajax Water Leak Detector
La alarma de manipulación se ha desactivado
Ajax Water Leak Detector
El nivel de la batería ha cambiado
Y...
Ajax Door/Window Sensor
La alarma de contacto está activada
Ajax Door/Window Sensor
La alarma de manipulación está activada
Ajax Glass Break Detector
La alarma de manipulación está activada
Ajax Hub
El estado es ...
Ajax Hub
La alarma de manipulación está activada
Ajax Hub
GSM signal is weak
Check if the hub's GSM signal is weak or has no signal
Ajax Hub
Hub is armed
Check if a specific hub is currently armed
Ajax Hub
Night mode is enabled
Check if night mode is enabled on a hub
Ajax Hub
Wi-Fi signal is weak
Check if the hub's Wi-Fi signal is weak or has no signal
Ajax KeyPad
La alarma de manipulación está activada
Ajax Motion Sensor
La alarma de movimiento está activada
Ajax Motion Sensor
La alarma de manipulación está activada
Ajax Range Extender
La alarma de manipulación está activada
Ajax Security Group
El estado es ...
Ajax Siren
La alarma de manipulación está activada
Ajax Smoke/Fire Detector
La alarma de humo está activada
Ajax Smoke/Fire Detector
La alarma de calor está activada
Ajax Smoke/Fire Detector
La alarma de CO está activada
Ajax Smoke/Fire Detector
La alarma de manipulación está activada
Ajax Socket/Relay
Está encendido
Ajax Socket/Relay
La alarma de manipulación está activada
Ajax Transmitter
La alarma de contacto está activada
Ajax Transmitter
La alarma de manipulación está activada
Ajax Water Leak Detector
La alarma de agua está activada
Ajax Water Leak Detector
La alarma de manipulación está activada
Entonces...
Ajax Hub
Definir estado ...
Ajax Hub
Arm the hub
Arm an Ajax hub
Ajax Hub
Disarm the hub
Disarm an Ajax hub
Ajax Hub
Mute fire detectors
Mute all fire detectors on an Ajax hub
Ajax Hub
Disable night mode
Disable night mode on an Ajax hub
Ajax Hub
Enable night mode
Enable night mode on an Ajax hub
Ajax Hub
Send panic alert
Send a panic alert to the Ajax hub's monitoring station
Ajax Security Group
Definir estado ...
Ajax Socket/Relay
Encender
Ajax Socket/Relay
Apagar
Ajax Socket/Relay
Encender o apagar
Asistencia
El desarrollador de esta aplicación no ofrece soporte directo.
Novedades
Versión 1.0.30 — Added temporarily driver icons while awaiting Athom
Ajax Systems
Ajax Systems no es compatible con el Homey seleccionado.
Ajax Systems se instalará en Homey en breve.
Registro de cambios
¡Enviaremos un agradecimiento a Thomas Thaulow Stöcklin!
Le haremos saber a Thomas Thaulow Stöcklin que te encanta la aplicación.
Se han enviado tus sugerencias
Avisaremos a Thomas Thaulow Stöcklin para que esté al tanto de las sugerencias.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
