Curtain controller
The position changed
NEO Coolcam Z-Wave
NEO Coolcam Z-Wave device support
Neo Coolcam Z-Wave device support
Supported devices with most common parameters:
NAS-PD01ZE, Motion Sensor
NAS-PD02ZE, Motion Sensor V2
NAS-PD03ZE, Motion Sensor V3
NAS-PD07ZE, Motion Sensor V4
NAS-WR01ZE, Power Switching Plug
NAS-WR02ZE, Power Switching Plug V2
NAS-SC01ZE, Touch Wall Switch Single
NAS-SC02ZE, Touch Wall Switch Dual
NAS-SC03ZE, Touch Wall Switch Triple
NAS-CS03ZE, Curtain Controller
NAS-AB01ZE, Siren / Doorbell speaker
NAS-AB02ZE, Siren / Doorbell speaker V2
NAS-RC01ZE, Remote KeyFob / Alarm Button
NAS-RS01ZE, Remote Emergency Button
NAS-DS01ZE, Door Sensor
NAS-DS07ZE, Door Sensor V2
NAS-WS01ZE, Flood Sensor
NAS-RE01ZE, ZWave Repeater
Support notes:
Most reliable way to update battery powered devices
1. Place the sensor near Homey (< 1 meter)
2. Change the settings to the values you want
3. Wake up the sensor (triple click the button)
4. During the blinking of the LED (indicating connection to Homey) press "save settings"
Supported devices
Flow cards
Click on a device above to show related Flow cards only.
When...
Curtain controller
Turned on
Curtain controller
Turned off
Door Sensor
The contact alarm turned on
Door Sensor
The contact alarm turned off
Door Sensor
The battery level changed
Door Sensor V2
The contact alarm turned on
Door Sensor V2
The contact alarm turned off
Door Sensor V2
The tamper alarm turned on
Door Sensor V2
The tamper alarm turned off
Door Sensor V2
The temperature changes
Door Sensor V2
The humidity changed
Door Sensor V2
The battery level changed
Flood Sensor
The water alarm turned on
Flood Sensor
The water alarm turned off
Flood Sensor
The battery level changed
Flood Sensor
The battery alarm turned on
Flood Sensor
The battery alarm turned off
KeyFob
The battery level changed
KeyFob
The battery alarm turned on
KeyFob
The battery alarm turned off
KeyFob
Button ... ... is activated
This card will only get triggered if the button and scene match the state of the dropdown fields.
KeyFob
Emergency Alarm
This card will trigger when Emergency button is activated.
PIR V1
The motion alarm turned on
PIR V1
The motion alarm turned off
PIR V1
The luminance changed
PIR V1
The battery level changed
PIR V2
The motion alarm turned on
PIR V2
The motion alarm turned off
PIR V2
The temperature changes
PIR V2
The luminance changed
PIR V2
The battery level changed
PIR V3
The motion alarm turned on
PIR V3
The motion alarm turned off
PIR V3
The temperature changes
PIR V3
The luminance changed
PIR V3
The battery level changed
PIR V4
The motion alarm turned on
PIR V4
The motion alarm turned off
PIR V4
The tamper alarm turned on
PIR V4
The tamper alarm turned off
PIR V4
The temperature changes
PIR V4
The luminance changed
PIR V4
The humidity changed
PIR V4
The battery level changed
Power Wallplug V1
Turned on
Power Wallplug V1
Turned off
Power Wallplug V1
The power meter changed
Power Wallplug V1
The power changed
Power Wallplug V1
The electric current changed
Power Wallplug V1
The voltage changed
Power Wallplug V2
Turned on
Power Wallplug V2
Turned off
Power Wallplug V2
The power meter changed
Power Wallplug V2
The power changed
Power Wallplug V2
The electric current changed
Power Wallplug V2
The voltage changed
Siren/Doorbell
Turned on
Siren/Doorbell
Turned off
Siren/Doorbell
The battery level changed
Siren/Doorbell
Siren Alarm
This card will trigger when siren is activated.
SOS Button
The battery level changed
SOS Button
The battery alarm turned on
SOS Button
The battery alarm turned off
SOS Button
Emergency Alarm
This card will trigger when Emergency button is activated.
Touch Switch Dual
Turned on
Touch Switch Dual
Turned off
Touch Switch Single
Turned on
Touch Switch Single
Turned off
Touch Switch Triple
Turned on
Touch Switch Triple
Turned off
Z-Wave Repeater
The temperature changes
Z-Wave Repeater
The humidity changed
And...
Curtain controller
Is turned on
Curtain controller
Is open
Door Sensor
The contact alarm is on
Door Sensor V2
The contact alarm is on
Door Sensor V2
The tamper alarm is on
Flood Sensor
The water alarm is on
Flood Sensor
The battery alarm is on
KeyFob
The battery alarm is on
PIR V1
The motion alarm is on
PIR V2
The motion alarm is on
PIR V3
The motion alarm is on
PIR V4
The motion alarm is on
PIR V4
The tamper alarm is on
Power Wallplug V1
Is turned on
Power Wallplug V2
Is turned on
Siren/Doorbell
Is turned on
SOS Button
The battery alarm is on
Touch Switch Dual
Is turned on
Touch Switch Single
Is turned on
Touch Switch Triple
Is turned on
Then...
Curtain controller
Set the position to %
Change the position to open (100%), closed (0%), or a value in between.
Curtain controller
Turn on
Curtain controller
Turn off
Curtain controller
Toggle on or off
Curtain controller
Open the curtain or blind
Curtain controller
Close the curtain or blind
Power Wallplug V1
Turn on
Power Wallplug V1
Turn off
Power Wallplug V1
Toggle on or off
Power Wallplug V1
Reset meter values
Reset the accumulated power usage value (kWh), note that this can not be reversed.
Power Wallplug V2
Turn on
Power Wallplug V2
Turn off
Power Wallplug V2
Toggle on or off
Power Wallplug V2
Reset meter values
Reset the accumulated power usage value (kWh), note that this can not be reversed.
Siren/Doorbell
Turn on
Siren/Doorbell
Turn off
Siren/Doorbell
Toggle on or off
Siren/Doorbell
Change the alarm state to ...
Change the alarm state; sound or silence the alarm
Siren/Doorbell
Set volume of siren to ...
Set volume of siren.
Siren/Doorbell
Set volume of the doorbell to ...
Set volume of the doorbell.
Siren/Doorbell
Set the device mode to ...
Set the device mode; alarm or doorbell mode
Siren/Doorbell
Set the alarm tune to ...
Choose the tune of the alarm sound
Siren/Doorbell
Set the doorbell tune to ...
Choose the tune of the doorbell sound
Touch Switch Dual
Turn on
Touch Switch Dual
Turn off
Touch Switch Dual
Toggle on or off
Touch Switch Dual
Set Touch Switch LED to ...
Enable or disable the Touch Switch LED, lighting up when enabled
Touch Switch Single
Turn on
Touch Switch Single
Turn off
Touch Switch Single
Toggle on or off
Touch Switch Single
Set Touch Switch LED to ...
Enable or disable the Touch Switch LED, lighting up when enabled
Touch Switch Triple
Turn on
Touch Switch Triple
Turn off
Touch Switch Triple
Toggle on or off
Touch Switch Triple
Set Touch Switch LED to ...
Enable or disable the Touch Switch LED, lighting up when enabled
Support
Having an issue with this app? Contact the developer by sending an e-mail.
What’s new
Version 3.0.11 — More image cleanup
NEO Coolcam Z-Wave
NEO Coolcam Z-Wave is not compatible with the selected Homey.
NEO Coolcam Z-Wave will install on Homey shortly.
Changelog
We’ll send a thank you to Marco Ruiter!
We’ll let Marco Ruiter know you love the app. Maybe consider supporting Marco Ruiter by making a donation?
Donate to Marco Ruiter
The developer of NEO Coolcam Z-Wave accepts donations.
Make a donation to say thanks!
Your suggestion has been sent
We’ll notify Marco Ruiter you’ve sent a suggestion.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
