GoodWe inverter (SEMS cloud)
The power changed
GoodWe SEMS
Your GoodWe solar yield, properly counted in Homey Energy.
Connect your GoodWe installation with your SEMS+ account. Homey looks for your station and checks the first reading. Your solar production appears as generation in Homey Energy. You can see the latest power reading, today's yield, total yield and inverter status.
The app reads data through SEMS+. You can keep using the GoodWe app alongside it.
Use sustained solar surplus to run a charger or water heater that Homey already controls. Use your GoodWe grid meter or feed readings from a separate Homey P1 meter through one Flow. Get alerts when SEMS+ readings stop or resume, or choose when to receive a yield summary.
See when GoodWe last reported and which grid source your Flows use on the device itself. Open 'Check and report' for connection history. If you need to sign in again, repair the connection from your existing device to keep its Flows and Insights.
Supported devices
Flow cards
Click on a device above to show related Flow cards only.
When...
GoodWe inverter (SEMS cloud)
The power meter changed
GoodWe inverter (SEMS cloud)
The temperature changes
GoodWe inverter (SEMS cloud)
Inverter goes offline
Triggers once when the inverter status changes to Offline.
GoodWe inverter (SEMS cloud)
Inverter comes back online
Triggers once when the inverter reports again after being offline.
GoodWe inverter (SEMS cloud)
Yield today reaches kWh kWh
Triggers once when today's yield crosses this value. Resets automatically the next day.
GoodWe inverter (SEMS cloud)
Total yield reaches kWh kWh
Triggers once when the all-time total yield crosses this value.
GoodWe inverter (SEMS cloud)
Inverter starts producing
Triggers once when the solar power rises above 10 W, for example at sunrise.
GoodWe inverter (SEMS cloud)
Inverter stops producing
Triggers once when the solar power falls below 10 W, for example at sunset.
GoodWe inverter (SEMS cloud)
Inverter status changed
Triggers on every status change reported by GoodWe, also for statuses this app does not know by name.
GoodWe inverter (SEMS cloud)
Day finished (daily summary)
Triggers once when a new day starts, with the final figures of the day that just ended. Ideal for a daily push notification.
GoodWe inverter (SEMS cloud)
Battery level rises above % %
Only for inverters with a battery.
GoodWe inverter (SEMS cloud)
Battery level drops below % %
Only for inverters with a battery.
GoodWe inverter (SEMS cloud)
Grid export is at least Watts W for Minutes minutes
Requires SEMS net power readings. The timer uses new measurements and restarts if readings stop arriving.
GoodWe inverter (SEMS cloud)
Grid import is at least Watts W for Minutes minutes
Requires SEMS net power readings. The timer uses new measurements and restarts if readings stop arriving.
GoodWe inverter (SEMS cloud)
SEMS data stops updating
Fires once when SEMS readings are too old or unavailable. An inverter reporting Offline by itself does not trigger this card.
GoodWe inverter (SEMS cloud)
SEMS data starts updating again
Fires once when usable SEMS readings return after an interruption.
And...
GoodWe inverter (SEMS cloud)
Inverter is producing power
GoodWe inverter (SEMS cloud)
Yield today is at least kWh kWh
GoodWe inverter (SEMS cloud)
Battery level is at least % %
GoodWe inverter (SEMS cloud)
Exporting more than W W to the grid
Needs a station with grid data (a meter at the connection point).
GoodWe inverter (SEMS cloud)
Grid import is at least Watts W
Requires a recent SEMS grid power reading.
GoodWe inverter (SEMS cloud)
Inverter is online
GoodWe inverter (SEMS cloud)
Data is up to date
Checks that SEMS has recently supplied usable data for this station.
Then...
GoodWe inverter (SEMS cloud)
Refresh now
Immediately fetches the latest reading from SEMS instead of waiting for the next poll.
GoodWe inverter (SEMS cloud)
Read solar day summary for Period
Today uses the latest daily snapshot. The last ended day may be older after an outage. Missing figures are shown as a dash.
Advanced
GoodWe inverter (SEMS cloud)
Send P1 reading Net power W with ...
Use the net power tag from your P1 meter. Run on every new reading.
Support
The developer of this app does not offer direct support.
What’s new
Version 8.0.1 — Pairing now checks your first SEMS+ reading. If you need to sign in again, repair the connection from your existing device to keep its Flows and Insights.
GoodWe SEMS
GoodWe SEMS is not compatible with the selected Homey.
GoodWe SEMS will install on Homey shortly.
Changelog
We’ll send a thank you to Wisse Koelman!
We’ll let Wisse Koelman know you love the app. Maybe consider supporting Wisse Koelman by making a donation?
Donate to Wisse Koelman
The developer of GoodWe SEMS accepts donations.
Make a donation to say thanks!
Your suggestion has been sent
We’ll notify Wisse Koelman you’ve sent a suggestion.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
