Battery
The power changed
SolarEdge
Powering People's Lives Around the World
Follow your SolarEdge installation live in Homey: solar production, home consumption, the grid, your battery and EV charging. Use the data in Flows and in Homey Energy.
Two ways to connect:
- Cloud: sign in with the e-mail address and password of your mySolarEdge account. Works on every Homey, including Homey Cloud.
- Modbus: connect directly to the inverter on your local network. Works only on Homey Pro. Modbus TCP must be enabled on the inverter (your installer can do this in SetApp).
Cloud devices: inverter (one device per inverter), meter, battery, EV charger and Home Load Controller.
Modbus devices: inverter, meter, battery and SolarEdge Home EV Charger, including control of output power, grid export, battery charging and EV charging.
Known limitations: the cloud login does not work for accounts that use two-factor authentication (2FA) or sign in with a company account (single sign-on).
Supported devices
Flow cards
Click on a device above to show related Flow cards only.
When...
Battery
The battery level changed
Battery
The battery charging state changed ...
Battery
Is disconnected
Battery
Is connected
Battery (Modbus)
The power changed
Battery (Modbus)
The target power changed
Battery (Modbus)
The target power mode changed to ...
"Homey" means Homey controls the device’s target power. Other modes are determined by the device.
Battery (Modbus)
The battery level changed
Battery (Modbus)
The battery charging state changed ...
Battery (Modbus)
The temperature changes
Battery (Modbus)
A problem is detected
Battery (Modbus)
The problem is solved
EV Charger
The power changed
EV Charger
Started charging
EV Charger
Stopped charging
EV Charger
The EV charger charging state changed ...
EV Charger
Charge mode changed
EV Charger
Solar charging turned off
EV Charger
Solar charging turned on
EV Charger (Modbus)
The power changed
EV Charger (Modbus)
Started charging
EV Charger (Modbus)
Stopped charging
EV Charger (Modbus)
The EV charger charging state changed ...
EV Charger (Modbus)
The target power changed
EV Charger (Modbus)
The target power mode changed to ...
"Homey" means Homey controls the device’s target power. Other modes are determined by the device.
EV Charger (Modbus)
A problem is detected
EV Charger (Modbus)
The problem is solved
Home Load Controller
State changed
Inverter
The power changed
Inverter
The power meter changed
Inverter
A problem is detected
Inverter
The problem is solved
Inverter
Is disconnected
Inverter
Is connected
Inverter
Inverter status changed
Inverter
Voltage phase 1 changed
Inverter
Voltage phase 2 changed
Inverter
Voltage phase 3 changed
Inverter
Energy today changed
Inverter (Modbus)
The power changed
Inverter (Modbus)
The target power changed
Inverter (Modbus)
The power meter changed
Inverter (Modbus)
The temperature changes
Inverter (Modbus)
The frequency changed
Inverter (Modbus)
A problem is detected
Inverter (Modbus)
The problem is solved
Inverter (Modbus)
Inverter status changed
Inverter (Modbus)
Voltage phase 1 changed
Inverter (Modbus)
Voltage phase 2 changed
Inverter (Modbus)
Voltage phase 3 changed
Meter
The power changed
Meter
Is disconnected
Meter
Is connected
Meter
Home consumption changed
Meter
Exported energy changed
Meter
Imported energy changed
Meter (Modbus)
The power changed
Meter (Modbus)
The frequency changed
Meter (Modbus)
Voltage phase 1 changed
Meter (Modbus)
Voltage phase 2 changed
Meter (Modbus)
Voltage phase 3 changed
Meter (Modbus)
Exported energy changed
Meter (Modbus)
Imported energy changed
And...
Battery
The battery charging state is ...
Battery
Is connected
Battery (Modbus)
The target power mode is ...
"Homey" means Homey controls the device’s target power. Other modes are determined by the device.
Battery (Modbus)
The battery charging state is ...
Battery (Modbus)
There is a problem
EV Charger
Is charging
EV Charger
The EV charger charging state is ...
EV Charger
Charge mode is Charge mode
EV Charger
Solar charging is on
EV Charger (Modbus)
Is charging
EV Charger (Modbus)
The EV charger charging state is ...
EV Charger (Modbus)
The target power mode is ...
"Homey" means Homey controls the device’s target power. Other modes are determined by the device.
EV Charger (Modbus)
There is a problem
Home Load Controller
State is State
Inverter
There is a problem
Inverter
Is connected
Inverter
Inverter status is Inverter status
Inverter (Modbus)
There is a problem
Inverter (Modbus)
Inverter status is Inverter status
Meter
Is connected
Then...
Battery (Modbus)
Set the target power W
This also switches the target power mode to Homey. For EV chargers, charging is automatically started or stopped.
Battery (Modbus)
Set the target power mode to ...
To control the target power of this device via Homey, select "Homey". Other modes are determined by the device.
Battery (Modbus)
Set backup reserve to Backup reserve%
SoC kept for a power outage, on inverters with backup hardware. Stored in the inverter.
EV Charger
Start charging
EV Charger
Stop charging
EV Charger
Charge automatically
Back to the charger's schedule and solar surplus charging.
EV Charger (Modbus)
Start charging
EV Charger (Modbus)
Stop charging
EV Charger (Modbus)
Set the target power W
This also switches the target power mode to Homey. For EV chargers, charging is automatically started or stopped.
EV Charger (Modbus)
Set the target power mode to ...
To control the target power of this device via Homey, select "Homey". Other modes are determined by the device.
EV Charger (Modbus)
Charge on Phases
Switches contact X2 of the charger; needs "Phase switching via Modbus" in the device settings.
EV Charger (Modbus)
Stop this charging session after Energy kWh
Only while a car is plugged in; applies to this session only.
Home Load Controller
Set the state to State
Inverter (Modbus)
Set the target power W
This also switches the target power mode to Homey. For EV chargers, charging is automatically started or stopped.
Inverter (Modbus)
Set export limit to Limit W
Only where the installer set up export limitation with a meter. Stored in the inverter.
SolarEdge
Get status update
Reads all local (Modbus) devices right away, on top of the normal update interval.
Support
Having an issue with this app? Contact the developer via the developer website.
What’s new
Version 2.1.2 — Fixed multiple inverters and batteries. Added inverter throttled status and voltage. Improved Modbus and EV charger energy. Minor other fixes and improvements.
SolarEdge
SolarEdge is not compatible with the selected Homey.
SolarEdge will install on Homey shortly.
Changelog
We’ll send a thank you to RM de Gruijter!
We’ll let RM de Gruijter know you love the app.
Your suggestion has been sent
We’ll notify RM de Gruijter you’ve sent a suggestion.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
