NRG.Watch Itho add-on

Control and monitor your Itho ventilation system via MQTT or API in Homey (requires the NRG.Watch Itho add-on).

Warnung! Diese App funktioniert möglicherweise nicht richtig.

Diese App wird getestet und wurde noch nie überprüft. Sie funktioniert möglicherweise
nicht wie erwartet. Sei besonders vorsichtig, wenn du diese App installierst.

« Zurück zur normalen Version

Control and monitor your Itho ventilation system via MQTT or API in Homey (requires the NRG.Watch Itho add-on).

Mehr lesen ›

Unterstützte Geräte

Flow-Karten

Klicke oben auf ein Gerät, um nur verwandte Flow-Karten anzuzeigen.

Wenn ...

NRG.Watch Itho (API)
Die Temperatur hat sich geändert
NRG.Watch Itho (API)
Die Luftfeuchtigkeit hat sich geändert
NRG.Watch Itho (API)
A command failed
NRG.Watch Itho (API)
A command was sent successfully
NRG.Watch Itho (API)
The Itho device went offline
NRG.Watch Itho (API)
The Itho device came online
NRG.Watch Itho (API)
The error state changed
NRG.Watch Itho (API)
The fan preset changed
NRG.Watch Itho (API)
The fan speed changed
NRG.Watch Itho (API)
The humidity changed
NRG.Watch Itho (API)
The temperature changed
NRG.Watch Itho (MQTT)
Die Temperatur hat sich geändert
NRG.Watch Itho (MQTT)
Die Luftfeuchtigkeit hat sich geändert
NRG.Watch Itho (MQTT)
A command failed
NRG.Watch Itho (MQTT)
A command was sent successfully
NRG.Watch Itho (MQTT)
The Itho device went offline
NRG.Watch Itho (MQTT)
The Itho device came online
NRG.Watch Itho (MQTT)
The error state changed
NRG.Watch Itho (MQTT)
The fan preset changed
NRG.Watch Itho (MQTT)
The fan speed changed
NRG.Watch Itho (MQTT)
The humidity changed
NRG.Watch Itho (MQTT)
MQTT broker connected
NRG.Watch Itho (MQTT)
MQTT broker disconnected
NRG.Watch Itho (MQTT)
Message received on topic Topic
i
Triggers when a message is received on the specified MQTT topic. Supports wildcards: + (single level) and # (multi level).
NRG.Watch Itho (MQTT)
The temperature changed

Und ...

NRG.Watch Itho (API)
The Itho device has an error
NRG.Watch Itho (API)
The Itho device is online
NRG.Watch Itho (API)
The fan preset is Preset
NRG.Watch Itho (API)
The fan speed is above Speed (0-255)
NRG.Watch Itho (API)
The fan speed is below Speed (0-255)
NRG.Watch Itho (API)
The fan speed is Speed (0-255)
NRG.Watch Itho (API)
The humidity is above Humidity %
NRG.Watch Itho (API)
The humidity is below Humidity %
NRG.Watch Itho (API)
The temperature is above Temperature °C
NRG.Watch Itho (API)
The temperature is below Temperature °C
NRG.Watch Itho (MQTT)
The Itho device has an error
NRG.Watch Itho (MQTT)
The Itho device is online
NRG.Watch Itho (MQTT)
The fan preset is Preset
NRG.Watch Itho (MQTT)
The fan speed is above Speed (0-255)
NRG.Watch Itho (MQTT)
The fan speed is below Speed (0-255)
NRG.Watch Itho (MQTT)
The fan speed is Speed (0-255)
NRG.Watch Itho (MQTT)
The humidity is above Humidity %
NRG.Watch Itho (MQTT)
The humidity is below Humidity %
NRG.Watch Itho (MQTT)
MQTT broker is connected
NRG.Watch Itho (MQTT)
The temperature is above Temperature °C
NRG.Watch Itho (MQTT)
The temperature is below Temperature °C

Dann ...

NRG.Watch Itho (API)
Clear queued timers and commands
i
Clears queued timers and returns to the fallback/base behavior
NRG.Watch Itho (API)
Send virtual remote command Command
i
Emulates a configured virtual remote
NRG.Watch Itho (API)
Set the fan preset to Preset
i
Sends a preset command such as low, medium, or high
NRG.Watch Itho (API)
Set the fan speed to Speed (0-255)
i
Sets the raw fan speed value in the supported range 0-255
NRG.Watch Itho (API)
Set the fan speed to Speed (0-255) for Seconds seconds
i
Sets the fan speed with a timer
NRG.Watch Itho (API)
Start a timer for Seconds seconds
i
Starts a timed fan action. The exact resulting speed depends on the linked preset or speed.
NRG.Watch Itho (MQTT)
Clear queued timers and commands
i
Clears queued timers and returns to the fallback/base behavior
NRG.Watch Itho (MQTT)
Send Message on topic Topic with QoS Quality of Service and retain Retain
i
Publishes a message to the specified MQTT topic with custom QoS and retain settings
NRG.Watch Itho (MQTT)
Send Message on topic Topic
i
Publishes a message to the specified MQTT topic with default QoS 0 and no retain
NRG.Watch Itho (MQTT)
Send virtual remote command Command
i
Emulates a configured virtual remote
NRG.Watch Itho (MQTT)
Set the fan preset to Preset
i
Sends a preset command such as low, medium, or high
NRG.Watch Itho (MQTT)
Set the fan speed to Speed (0-255)
i
Sets the raw fan speed value in the supported range 0-255
NRG.Watch Itho (MQTT)
Set the fan speed to Speed (0-255) for Seconds seconds
i
Sets the fan speed with a timer
NRG.Watch Itho (MQTT)
Start a timer for Seconds seconds
i
Starts a timed fan action. The exact resulting speed depends on the linked preset or speed.

Support

Hast du Probleme mit dieser App? Kontaktiere den Entwickler hier.

Was ist neu?

Version 1.0.2 — Fixed icons and readme

Changelog ansehen

NRG.Watch Itho add-on

NRG.Watch Itho add-on ist mit dem gewählten Homey nicht kompatibel.

NRG.Watch Itho add-on wird in Kürze auf Homey installiert.
Installieren