The Homevolt app for Homey helps you getting a better understanding of your Homey Energy utilization by connecting your Homevolt battery and power sensors to Homey.
Monitor your charge level, charge/discharge pattern and even grid frequency from the Homey app.
This app requires:
- A Homevolt battery connected to your local network
- The webserver enabled on your Homevolt battery
- Https to be disabled
- Password (local auth) to be disabled
GETTING STARTED
1. Ensure the local web server is enabled (without password)
2. Install the Homevolt for Homey app
3. Add your Homevolt battery and sensors
4. Make sure you configure your sensors as per your requirement. If the Grid sensor is your only incoming measurement, feel free to use that. If not, disable the contribution to home energy in the advanced settings.
CONSIDERATIONS & LIMITATIONS
- This app is using the local webserver to poll data.
- This is an unsanctioned, non supported API and may break at any point in time.
- This app is not affiliated with Homevolt/Tibber/Polarium.
- Auth is not supported. Password needs to be disabled on the local web server.
- No scheduling support (yet).
- Pairing (mdns discovery) parses the hostname to detect a Homevolt device and serial number. If you change this pairing will likely fail.
Klicke oben auf ein Gerät, um nur verwandte Flow-Karten anzuzeigen.
Wenn ...
Homevolt battery
Der Batteriestand hat sich geändert
Homevolt battery
Die Stromversorgung wurde geändert
Homevolt battery
Die Temperatur hat sich geändert
Homevolt battery
The frequency changed
Homevolt battery
Batteriestatus geändert
i
Wird ausgelöst, wenn sich der Batteriestatus ändert, z. B. lädt -> Leerlauf.
Homevolt sensors
Die Stromversorgung wurde geändert
Homevolt sensors
The signal strength changed
Und ...
Homevolt battery
Status ist Status
i
Prüft, ob der aktuelle Batteriestatus einem bestimmten Status entspricht.
Support
Hast du Probleme mit dieser App?
Kontaktiere den Entwickler hier.
Was ist neu?
Version 1.1.0 — Changed behavior of charge/discharge to align with homey guidelines and work better in homey energy. Power & Target Power values are now negated (-power, -targetPower). No change to discharge/charge states or anything else.