Elegoo SDCP Drucker

Elegoo SDCP Printers Control and monitor your Elegoo 3D printer directly from Homey using the local SDCP v3 protocol. No cloud account required. Everything runs on your local network. SUPPORTED PRINTERS Elegoo Centauri Carbon FEATURES Real-time monitoring of nozzle, bed and chamber temperatures. Print progress, current layer and estimated time remaining. Live camera snapshot updated every 5 seconds. Full fan control including part cooling, auxiliary and exhaust fans. Chamber light toggle. Emergency stop, pause and resume print controls. Print speed and extrusion factor adjustment. SENSORS AND INSIGHTS Nozzle temperature Bed temperature Chamber temperature Print progress Layer progress Current layer and total layers Z position Remaining print time Current filename Printer status Fan speeds USB disk status Camera enabled status Active video streams Motor status Network interface Remaining storage Firmware version Printer model and IP address FLOW AUTOMATION Triggers: Print Started, Print Finished, Print Paused, Print Resumed, Filament Runout, Status Changed, Progress Reached, Layer Reached, Temperature Reached, Camera Status Changed, Motors Status Changed, Someone Started Watching Camera, Viewers Stopped Watching Camera, Error Detected, Firmware Update Available. Actions: Emergency Stop, Pause Print, Resume Print, Home Axes, Set Speed Preset, Set Fan Speed, Set Chamber Light. Conditions: Is Printing, Is Paused, Is Offline, Is Light On. SETUP Add the app and use the built-in discovery to find your printer automatically on the local network. The printer must be connected to the same Wi-Fi or LAN as your Homey. NOTE Temperature values and sensor data are only available when the printer is active. The printer does not broadcast sensor readings while idle.