Fibaro

Athom B.V.

Your home is your castle

Fibaro features an extensive range of sensors and switches, both plug-and-play and invisible-built-in. And all of them can be directly, wirelessly controlled by Homey. Start small with their simple, beautiful compact Wall Plug or go all-in and make all your existing light switches smart with the Fibaro Dimmer. Or start with the devices you already own, like your TV, Chromecast, Sonos or smart thermostat. Expand and enjoy an even better home.
What's new in v3.0.24
Fixed an issue with the Walli Switch not triggering scenes.
Homey Pro
Homey beta

Поддерживаемые устройства

Button
CO Sensor
Dimmer
Dimmer 2
Door/Window Sensor
Door/Window Sensor (Z-Wave plus)
Door/Window sensor 2
Double Relay Switch
Double Relay Switch 2
Double Smart Module
Double Switch 2
Flood sensor
Flood sensor (Z-Wave Plus)
Keyfob
Motion Sensor
Motion Sensor (Z-Wave Plus)
Radiator Thermostat
Relay Switch
Relay Switch 2
RGBW Controller
RGBW Controller 2
Roller Shutter
Roller Shutter 2
Roller Shutter 2 (<2.4)
Roller Shutter 3
Single Switch 2
Smart Implant
Smart Module
Smoke Detector (Z-Wave plus)
Smoke Sensor
Swipe
Universal Binary Sensor
Wall Plug
Wall plug (Z-Wave plus)
Walli Controller
Walli Dimmer
Walli Outlet
Walli Roller Shutter
Walli Switch

Карты Flow

Нажмите на устройство выше, чтобы показать только связанные с ним карты Flow.

Когда...

Button
Button is Scene
CO Sensor
The battery level changed
CO Sensor
The CO alarm turned on
CO Sensor
The CO alarm turned off
CO Sensor
The heat alarm turned on
CO Sensor
The heat alarm turned off
CO Sensor
The temperature changed
Dimmer
Dim-level changed
Dimmer
Turned on
Dimmer
Turned off
Dimmer
Dimmer scene (momentary) Scene
i
This Flow Trigger will only get activated if the switch type setting is set to &quot;Momentary switch&quot;.
Dimmer
Dimmer scene (toggle) Scene
i
This Flow Trigger will only get activated if the switch type setting is set to &quot;Toggle Switch&quot;. Extra setting options: * = Bistable switch: same direction, ** = Bistable switch: toggle output
Dimmer
Dimmer scene (roller Shutter) Scene
i
This Flow Trigger will only get activated if the switch type setting is set to &quot;Roller shutter switch&quot;.
Dimmer 2
Dim-level changed
Dimmer 2
The power changed
Dimmer 2
The power meter changed
Dimmer 2
Turned on
Dimmer 2
Turned off
Dimmer 2
Button Scene (momentary)
i
This Flow Trigger will only get triggered if the value of the &quot;switch type&quot; setting is set to: &quot;Momentary switch&quot;.
Dimmer 2
Button Scene (toggle)
i
This Flow Trigger will only get triggered if the value of the &quot;switch type&quot; setting is set to: &quot;Toggle switch&quot;.
Dimmer 2
Button Scene (roller shutter)
i
This Flow Trigger will only get triggered if the value of the &quot;switch type&quot; setting is set to: &quot;Roller shutter switch&quot;.
Door/Window Sensor
The contact alarm turned on
Door/Window Sensor
The contact alarm turned off
Door/Window Sensor
The tamper alarm turned on
Door/Window Sensor
The tamper alarm turned off
Door/Window Sensor
The temperature changed
Door/Window Sensor
The battery level changed
Door/Window Sensor (Z-Wave plus)
The contact alarm turned on
Door/Window Sensor (Z-Wave plus)
The contact alarm turned off
Door/Window Sensor (Z-Wave plus)
The tamper alarm turned on
Door/Window Sensor (Z-Wave plus)
The tamper alarm turned off
Door/Window Sensor (Z-Wave plus)
The temperature changed
Door/Window Sensor (Z-Wave plus)
The battery level changed
Door/Window sensor 2
The battery level changed
Door/Window sensor 2
The contact alarm turned on
Door/Window sensor 2
The contact alarm turned off
Door/Window sensor 2
The tamper alarm turned on
Door/Window sensor 2
The tamper alarm turned off
Door/Window sensor 2
The temperature changed
Double Relay Switch
Turned on
Double Relay Switch
Turned off
Double Relay Switch 2
Turned on
Double Relay Switch 2
Turned off
Double Smart Module
Turned on
Double Smart Module
Turned off
Double Smart Module
Left button is Scene (S1)
Double Smart Module
Right switch is Scene (S2)
Double Switch 2
The power changed
Double Switch 2
The power meter changed
Double Switch 2
Turned on
Double Switch 2
Turned off
Double Switch 2
Left button is Scene (S1)
Double Switch 2
Right switch is Scene (S2)
Flood sensor
The battery level changed
Flood sensor
The tamper alarm turned on
Flood sensor
The tamper alarm turned off
Flood sensor
The temperature changed
Flood sensor
The water alarm turned on
Flood sensor
The water alarm turned off
Flood sensor (Z-Wave Plus)
The battery level changed
Flood sensor (Z-Wave Plus)
The tamper alarm turned on
Flood sensor (Z-Wave Plus)
The tamper alarm turned off
Flood sensor (Z-Wave Plus)
The temperature changed
Flood sensor (Z-Wave Plus)
The water alarm turned on
Flood sensor (Z-Wave Plus)
The water alarm turned off
Keyfob
The battery level changed
Keyfob
Button button was Scene
i
In order to use &quot;Pressed 2x/3x&quot; enable this functionality in the device settings.
Keyfob
Sequence pressed
i
First configure the sequences in the device settings panel of the Keyfob.
Motion Sensor
The battery level changed
Motion Sensor
The luminance changed
Motion Sensor
The temperature changed
Motion Sensor
The motion alarm turned on
Motion Sensor
The motion alarm turned off
Motion Sensor
The tamper alarm turned on
Motion Sensor
The tamper alarm turned off
Motion Sensor (Z-Wave Plus)
The battery level changed
Motion Sensor (Z-Wave Plus)
The luminance changed
Motion Sensor (Z-Wave Plus)
The temperature changed
Motion Sensor (Z-Wave Plus)
The motion alarm turned on
Motion Sensor (Z-Wave Plus)
The motion alarm turned off
Motion Sensor (Z-Wave Plus)
The tamper alarm turned on
Motion Sensor (Z-Wave Plus)
The tamper alarm turned off
Radiator Thermostat
The battery level changed
Radiator Thermostat
The target temperature changed
Radiator Thermostat
The temperature changed
Relay Switch
Turned on
Relay Switch
Turned off
Relay Switch 2
Turned on
Relay Switch 2
Turned off
RGBW Controller
Dim-level changed
RGBW Controller
The power changed
RGBW Controller
The power meter changed
RGBW Controller
Turned on
RGBW Controller
Turned off
RGBW Controller
Input turned on
RGBW Controller
Input turned off
RGBW Controller
Voltage input 1 changed
i
This will only trigger if the input type is set to analog
RGBW Controller
Voltage input 2 changed
i
This will only trigger if the input type is set to analog
RGBW Controller
Voltage input 3 changed
i
This will only trigger if the input type is set to analog
RGBW Controller
Voltage input 4 changed
i
This will only trigger if the input type is set to analog
RGBW Controller 2
Turned on
RGBW Controller 2
Turned off
RGBW Controller 2
Dim-level changed
RGBW Controller 2
The power changed
RGBW Controller 2
The power meter changed
RGBW Controller 2
Input turned on
RGBW Controller 2
Input turned off
RGBW Controller 2
Voltage Input changed
i
This will only trigger if the input type is set to analog
Roller Shutter
Position changed
Roller Shutter 2
Position changed
Roller Shutter 2
The power changed
Roller Shutter 2
The state changed ...
Roller Shutter 2 (&lt;2.4)
The state changed ...
Roller Shutter 2 (&lt;2.4)
Position changed
Roller Shutter 2 (&lt;2.4)
The power changed
Roller Shutter 2 (&lt;2.4)
The power meter changed
Roller Shutter 2 (&lt;2.4)
Button Scene (momentary)
i
This Flow Card will only get triggered if the setting Switch type: &quot;Momentary&quot; is selected.
Roller Shutter 2 (&lt;2.4)
Switch Scene (toggle)
i
This Flow Card will only get triggered if the setting Switch type: &quot;Toggle&quot; is selected.
Roller Shutter 2 (&lt;2.4)
Button Scene (Single momentary/gate)
i
This Flow Card will only get triggered if the setting Switch type is &quot;Single momentary&quot; or &quot;Gate mode&quot; is selected.
Roller Shutter 3
Position changed
Roller Shutter 3
The power changed
Roller Shutter 3
The power meter changed
Single Switch 2
The power changed
Single Switch 2
The power meter changed
Single Switch 2
Turned on
Single Switch 2
Turned off
Single Switch 2
Left Switch (S1) Scene
Single Switch 2
Right Switch (S2) Scene
Smart Implant
The humidity changed
Smart Implant
Input 1 opened
Smart Implant
Input 1 closed
Smart Implant
Input 1 switched
Smart Implant
Input 2 opened
Smart Implant
Input 2 closed
Smart Implant
Input 2 switched
Smart Implant
Internal temperature has changed
Smart Implant
Temperature 1 has changed
Smart Implant
Temperature 2 has changed
Smart Implant
Temperature 3 has changed
Smart Implant
Temperature 4 has changed
Smart Implant
Temperature 5 has changed
Smart Implant
Temperature 6 has changed
Smart Implant
Voltage input 1 changed
i
This will only trigger if the input type is set to analog
Smart Implant
Voltage input 2 changed
i
This will only trigger if the input type is set to analog
Smart Module
Turned on
Smart Module
Turned off
Smart Module
Left button was Scene (S1)
Smart Module
Right button was Scene (S2)
Smoke Detector (Z-Wave plus)
The battery level changed
Smoke Detector (Z-Wave plus)
The heat alarm turned on
Smoke Detector (Z-Wave plus)
The heat alarm turned off
Smoke Detector (Z-Wave plus)
The smoke alarm turned on
Smoke Detector (Z-Wave plus)
The smoke alarm turned off
Smoke Detector (Z-Wave plus)
The temperature changed
Smoke Sensor
The battery level changed
Smoke Sensor
The heat alarm turned on
Smoke Sensor
The heat alarm turned off
Smoke Sensor
The smoke alarm turned on
Smoke Sensor
The smoke alarm turned off
Smoke Sensor
The tamper alarm turned on
Smoke Sensor
The tamper alarm turned off
Smoke Sensor
The temperature changed
Swipe
The battery level changed
Swipe
Gesture Direction Scene
i
For this Flow Trigger to work the double gesture setting needs to be enabled in the device&apos;s settings.
Swipe
Circular gesture Direction Scene
i
When using the circular gesture it will trigger the &quot;Keep going round&quot; scene only once, and it will trigger the &quot;Going round stopped&quot; once the circular gesture is stopped.
Swipe
Gesture sequence Direction
i
Set the gesture sequences in the device&apos;s settings.
Universal Binary Sensor
Input 1 opened
Universal Binary Sensor
Input 1 closed
Universal Binary Sensor
Input 1 switched
Universal Binary Sensor
Input 2 opened
Universal Binary Sensor
Input 2 closed
Universal Binary Sensor
Input 2 switched
Universal Binary Sensor
Temperature 1 has changed
Universal Binary Sensor
Temperature 2 has changed
Universal Binary Sensor
Temperature 3 has changed
Universal Binary Sensor
Temperature 4 has changed
Wall Plug
Turned on
Wall Plug
Turned off
Wall Plug
The power changed
Wall Plug
The power meter changed
Wall plug (Z-Wave plus)
The power changed
Wall plug (Z-Wave plus)
The power meter changed
Wall plug (Z-Wave plus)
Turned on
Wall plug (Z-Wave plus)
Turned off
Walli Controller
The battery level changed
Walli Controller
The temperature changed
Walli Controller
Top switch Scene
Walli Controller
Bottom switch Scene
Walli Dimmer
Dim-level changed
Walli Dimmer
Turned on
Walli Dimmer
Turned off
Walli Dimmer
The power changed
Walli Dimmer
The power meter changed
Walli Outlet
Turned on
Walli Outlet
Turned off
Walli Outlet
The power changed
Walli Outlet
The power meter changed
Walli Roller Shutter
Position changed
Walli Roller Shutter
The power changed
Walli Roller Shutter
The power meter changed
Walli Switch
Power use of Output changed
Walli Switch
Output is pressed Presses

И...

CO Sensor
The CO alarm is on
CO Sensor
The heat alarm is on
Dimmer
Is turned on
Dimmer 2
Is turned on
Door/Window Sensor
The contact alarm is on
Door/Window Sensor
The tamper alarm is on
Door/Window Sensor (Z-Wave plus)
The contact alarm is on
Door/Window Sensor (Z-Wave plus)
The tamper alarm is on
Door/Window sensor 2
The contact alarm is on
Door/Window sensor 2
The tamper alarm is on
Double Relay Switch
Is turned on
Double Relay Switch 2
Is turned on
Double Smart Module
Is turned on
Double Switch 2
Is turned on
Flood sensor
The tamper alarm is on
Flood sensor
The water alarm is on
Flood sensor (Z-Wave Plus)
The tamper alarm is on
Flood sensor (Z-Wave Plus)
The water alarm is on
Motion Sensor
The motion alarm is on
Motion Sensor
The tamper alarm is on
Motion Sensor (Z-Wave Plus)
The motion alarm is on
Motion Sensor (Z-Wave Plus)
The tamper alarm is on
Relay Switch
Is turned on
Relay Switch 2
Is turned on
RGBW Controller
Is turned on
RGBW Controller 2
Is turned on
Roller Shutter 2
The state is  ...
Roller Shutter 2 (&lt;2.4)
The state is  ...
Single Switch 2
Is turned on
Smart Implant
Input 1 is open
Smart Implant
Input 2 is open
Smart Module
Is turned on
Smoke Detector (Z-Wave plus)
The heat alarm is on
Smoke Detector (Z-Wave plus)
The smoke alarm is on
Smoke Sensor
The heat alarm is on
Smoke Sensor
The smoke alarm is on
Smoke Sensor
The tamper alarm is on
Universal Binary Sensor
Input 1 is open
Universal Binary Sensor
Input 2 is open
Wall Plug
Is turned on
Wall plug (Z-Wave plus)
Is turned on
Walli Dimmer
Is turned on
Walli Outlet
Is turned on

Тогда...

Dimmer
Dim to %
Dimmer
Set relative dim-level %
i
Dim or brighten with respect to the device&apos;s current dim-level.
Dimmer
Turn on
Dimmer
Turn off
Dimmer
Toggle on or off
Dimmer
Start dim level change Direction
i
This action card will trigger the start of a dim level change in the set direction. Duration (for the change in dim-level from 0-100%) can be set by using the transition symbol. If not set, factory default duration is used.
Dimmer
Stop dim level change
i
This action card will trigger the stop of a dim level change.
Dimmer 2
Dim to %
Dimmer 2
Set relative dim-level %
i
Dim or brighten with respect to the device&apos;s current dim-level.
Dimmer 2
Turn on
Dimmer 2
Turn off
Dimmer 2
Toggle on or off
Dimmer 2
Start dim level change Direction
i
This action card will trigger the start of a dim level change in the set direction. Duration (for the change in dim-level from 0-100%) can be set by using the transition symbol. If not set, factory default duration is used.
Dimmer 2
Stop dim level change
i
This action card will trigger the stop of a dim level change.
Dimmer 2
Set forced brightness Set Forced Brightness Level
i
Change the &quot;set forced brightness&quot; parameter of your dimmer. If this parameter is active, switching on the Dimmer 2 (S1 single click) will always set this brightness level, 0 will disable this function.
Dimmer 2
Change brightness to Brightness Level for Dimming DurationDuration Unit
i
Change the brightness and specify the transition duration, 0 will change brightness instantly.
Dimmer 2
Automatically turn off after Set Timer Functionality
i
This Flow Action determines the time after which the device will automatically power off.
Dimmer 2
Reset meter values
i
Reset the accumulated power usage (kWh). Can not be reversed.
Double Relay Switch
Turn on
Double Relay Switch
Turn off
Double Relay Switch
Toggle on or off
Double Relay Switch 2
Turn on
Double Relay Switch 2
Turn off
Double Relay Switch 2
Toggle on or off
Double Smart Module
Turn on
Double Smart Module
Turn off
Double Smart Module
Toggle on or off
Double Switch 2
Turn on
Double Switch 2
Turn off
Double Switch 2
Toggle on or off
Double Switch 2
Reset meter values
i
Reset the accumulated power usage (kWh). Can not be reversed.
Radiator Thermostat
Set the temperature °C
Relay Switch
Turn on
Relay Switch
Turn off
Relay Switch
Toggle on or off
Relay Switch 2
Turn on
Relay Switch 2
Turn off
Relay Switch 2
Toggle on or off
RGBW Controller
Dim to %
RGBW Controller
Set relative dim-level %
i
Dim or brighten with respect to the device&apos;s current dim-level.
RGBW Controller
Set the hue °
i
Select a color from the hue scale, for example red (0°/360°), yellow (60°), or blue (180°).
RGBW Controller
Set a color ...
RGBW Controller
Set a random color
RGBW Controller
Set the saturation %
RGBW Controller
Set a temperature %
i
Adjusts the temperature of the light. A higher value means a warmer color.
RGBW Controller
Turn on
RGBW Controller
Turn off
RGBW Controller
Toggle on or off
RGBW Controller
Set specific brightness of Color to Brightness
RGBW Controller
Choose animation Animation
i
Animations only work if the mode type is set to RGB(W)
RGBW Controller 2
Turn on
RGBW Controller 2
Turn off
RGBW Controller 2
Toggle on or off
RGBW Controller 2
Dim to %
RGBW Controller 2
Set relative dim-level %
i
Dim or brighten with respect to the device&apos;s current dim-level.
RGBW Controller 2
Set the hue °
i
Select a color from the hue scale, for example red (0°/360°), yellow (60°), or blue (180°).
RGBW Controller 2
Set a color ...
RGBW Controller 2
Set a random color
RGBW Controller 2
Set the saturation %
RGBW Controller 2
Set a temperature %
i
Adjusts the temperature of the light. A higher value means a warmer color.
RGBW Controller 2
Choose animation Animation
Roller Shutter
Set the position to %
i
Change the position to open (100%), closed (0%), or a value in between.
Roller Shutter 2
Set the position to %
i
Change the position to open (100%), closed (0%), or a value in between.
Roller Shutter 2
Set state ...
Roller Shutter 2 (&lt;2.4)
Set state ...
Roller Shutter 2 (&lt;2.4)
Set the position to %
i
Change the position to open (100%), closed (0%), or a value in between.
Roller Shutter 2 (&lt;2.4)
Reset meter values
i
Reset the accumulated power usage (kWh). Can not be reversed.
Roller Shutter 3
Set the position to %
i
Change the position to open (100%), closed (0%), or a value in between.
Single Switch 2
Turn on
Single Switch 2
Turn off
Single Switch 2
Toggle on or off
Single Switch 2
Reset meter values
i
Reset the accumulated power usage (kWh). Can not be reversed.
Smart Implant
Output 1 on
Smart Implant
Output 1 off
Smart Implant
Output 1 toggle
Smart Implant
Output 2 on
Smart Implant
Output 2 off
Smart Implant
Output 2 toggle
Smart Module
Turn on
Smart Module
Turn off
Smart Module
Toggle on or off
Wall Plug
Turn on
Wall Plug
Turn off
Wall Plug
Toggle on or off
Wall Plug
LED Colour, On State Color
Wall Plug
LED Colour, Off State Color
Wall plug (Z-Wave plus)
Turn on
Wall plug (Z-Wave plus)
Turn off
Wall plug (Z-Wave plus)
Toggle on or off
Wall plug (Z-Wave plus)
LED Colour, On State Color
Wall plug (Z-Wave plus)
LED Colour, Off State Color
Walli Dimmer
Dim to %
Walli Dimmer
Set relative dim-level %
i
Dim or brighten with respect to the device&apos;s current dim-level.
Walli Dimmer
Turn on
Walli Dimmer
Turn off
Walli Dimmer
Toggle on or off
Walli Dimmer
LED Colour Color when turned off
Walli Dimmer
LED Colour Color when turned on
Walli Outlet
Turn on
Walli Outlet
Turn off
Walli Outlet
Toggle on or off
Walli Outlet
LED Colour Color when turned off
Walli Outlet
LED Colour Color when turned on
Walli Roller Shutter
Set the position to %
i
Change the position to open (100%), closed (0%), or a value in between.
Walli Roller Shutter
LED Colour Color when turned off
Walli Roller Shutter
LED Colour Color when turned on
Walli Switch
LED Colour Color when turned off
Walli Switch
LED Colour Color when turned on
Walli Switch
Turn Output on
Walli Switch
Turn Output off
Walli Switch
Toggle Output on or off

Отзывы

Для этого приложения пока нет отзывов.

Вы можете оставить отзыв после того, как какое-то время использовали это приложение.

Спасибо за ваш отзыв.

Отправить отзыв

Написать отзыв

Поддержка

Возникли проблемы с этим приложением? Свяжитесь с разработчиком здесь.

Fibaro: не совместимо с выбранным Homey.

Установить Fibaro на

Fibaro: будет установлено в Homey в ближайшее время.

Установить

Узнавайте первыми о самых последних разработках Homey.

Подпишитесь на нашу новостную рассылку и будьте в курсе новых функций Homey, эксклюзивных предложений и многого другого.