Easee Charger
The power changed
Easee Home
Small. Smart. Full of power.
Start and stop charging your car on a schedule, or based on other conditions you model in a flow. Take action when your car starts charging, or send a notification if no car is connected at a certain time to remind you to plug in your car. Disable your charger if you leave your home for a longer period. Access statistics for the last charge session, last month or for the lifetime of the charger.
Monitor the energy usage of your house via the Easee Equalizer. Take action when you are using 100% of the available power to avoid a main fuse to blow.
For more information about the app and the possibility to get support please visit the forum link in the section below.
Supported devices
Flow cards
Click on a device above to show related Flow cards only.
When...
Easee Charger
The voltage changed
Easee Charger
The power meter changed
Easee Charger
Turned on
Easee Charger
Turned off
Easee Charger
Turned off
Easee Charger
Turned on
Easee Charger
Charger status changed
Easee Charger
Charger status changed to Status
Easee Charger
Target charger dynamic current changed
Easee Equalizer
The power changed
Easee Equalizer
The power meter changed
Easee Equalizer
Consumption since midnight is [[consumptionSinceMidnight]]kWh
Easee Equalizer
Phase [[phase]] is utilized to [[percentageUtilized]]%, and [[currentUtilized]]A
And...
Easee Charger
Is turned on
Easee Charger
Charger is turned on
Easee Charger
Charger status is Status
Easee Charger
Charger is ready to start charging
Convenience condition to check if status is Paused, Car connected, or Awaiting Authentication
Easee Charger
Target charger dynamic current is Condition Current (A)
Easee Equalizer
Any phase is utilized above Utilization (%)%
Easee Equalizer
Phase ... is utilized above Utilization (%)%
Then...
Easee Charger
Turn on
Easee Charger
Turn off
Easee Charger
Toggle on or off
Easee Charger
Set charger state to State
Not recommended to use too frequently since it will wear out the FLASH storage inside the charger.
Easee Charger
Set dynamic Circuit current to Current
Changes the dynamic current for all chargers on this circuit
Easee Charger
Set dynamic circuit current to Current P1, Current P2 and Current P3
Changes the dynamic current for all chargers on this circuit
Easee Charger
Create schedule, charge between Start time - End time. Repeat: Repeat
Easee Charger
Decrease dynamic circuit current by 1 amp
Easee Charger
Delete schedule
Easee Charger
Disable smart charging
Not recommended to use too frequently since it will wear out the FLASH storage inside the charger.
Easee Charger
Set idle current state to Idle current
Not recommended to use too frequently since it will wear out the FLASH storage inside the charger.
Easee Charger
Enable smart charging
Not recommended to use too frequently since it will wear out the FLASH storage inside the charger.
Easee Charger
Increase dynamic circuit current by 1 amp
Easee Charger
Set led strip brightness to Brightness
Not recommended to use too frequently since it will wear out the FLASH storage inside the charger.
Easee Charger
Set permanent cable lock to Permanent cable lock
Not recommended to use too frequently since it will wear out the FLASH storage inside the charger.
Easee Charger
Override schedule
Easee Charger
Pause Charging
Easee Charger
Pause smart charging
Not recommended to use too frequently since it will wear out the FLASH storage inside the charger.
Easee Charger
Reboot charger
Easee Charger
Resume Charging
Easee Charger
Set charging price to Charging cost incl. Tax in Currency
Easee Charger
Set dynamic charger current to Current
Controls the charger current. Setting to less than ~7A will stop charging. Setting to higher than ~6A will start charging. If access is locked then the charger still needs to be turned on to start charging.
Easee Charger
Set max charger current to Current
Not recommended to use, and don't set higher than installed fuse.
Easee Charger
Toggle on or off
Uses Easee cloud toggle endpoint, i.e. no extra logic applied.
Easee Charger
Turn off
Triggers stop charging, if not successful then automatically trigger pause charging.
Easee Charger
Turn on
Triggers start charging, if not successful then automatically triggers resume charging.
Support
Having an issue with this app? Contact the developer here.
What’s new
Version 1.8.6 — Added flow cards for pausing and resuming charging sessions.
Easee Home
Easee Home is not compatible with the selected Homey.
Easee Home will install on Homey shortly.
Changelog
We’ll send a thank you to Richard Barkestam!
We’ll let Richard Barkestam know you love the app. Maybe consider supporting Richard Barkestam by making a donation?
Donate to Richard Barkestam
The developer of Easee Home accepts donations.
Make a donation to say thanks!
Your suggestion has been sent
We’ll notify Richard Barkestam you’ve sent a suggestion.
